Summary:
An earlier change (https://github.com/facebook/rocksdb/commit/b34cef57b798520791312f2f40681c4d12d5d33c) removed apparently unused functionality where an obsolete blob file number is passed for removal from TableCache, which manages SST files. This was actually relying on broken/fragile abstractions wherein TableCache and BlobFileCache share the same Cache and using the TableCache interface to manipulate blob file caching. No unit test was actually checking for removal of obsolete blob files from the cache (which is somewhat tricky to check and a second order correctness requirement).
Here we fix the leak and add a DEBUG+ASAN-only check in DB::Close() that no obsolete files are lingering in the table/blob file cache.
Fixes https://github.com/facebook/rocksdb/issues/13066
Important follow-up (FIXME): The added check discovered some apparent cases of leaked (into table_cache) SST file readers that would stick around until DB::Close(). Need to enable that check, diagnose, and fix.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13106
Test Plan:
added a check that is called during DB::Close in ASAN builds (to minimize paying the cost in all unit tests). Without the fix, the check failed in at least these tests:
```
db_blob_basic_test DBBlobBasicTest.DynamicallyWarmCacheDuringFlush
db_blob_compaction_test DBBlobCompactionTest.CompactionReadaheadMerge
db_blob_compaction_test DBBlobCompactionTest.MergeBlobWithBase
db_blob_compaction_test DBBlobCompactionTest.CompactionDoNotFillCache
db_blob_compaction_test DBBlobCompactionTest.SkipUntilFilter
db_blob_compaction_test DBBlobCompactionTest.CompactionFilter
db_blob_compaction_test DBBlobCompactionTest.CompactionReadaheadFilter
db_blob_compaction_test DBBlobCompactionTest.CompactionReadaheadGarbageCollection
```
Reviewed By: ltamasi
Differential Revision: D65296123
Pulled By: pdillinger
fbshipit-source-id: 2276d76482beb2c75c9010bc1bec070bb23a24c0
Summary:
Compaction stats code is not so straightforward to understand. Here's a bit of context for this PR and why this change was made.
- **CompactionStats (compaction_stats_.stats):** Internal stats about the compaction used for logging and public metrics.
- **CompactionJobStats (compaction_job_stats_)**: The public stats at job level. It's part of Compaction event listener and included in the CompactionResult.
- **CompactionOutputsStats**: output stats only. resides in CompactionOutputs. It gets aggregated toward the CompactionStats (internal stats).
The internal stats, `compaction_stats_.stats`, has the output information recorded from the compaction iterator, but it does not have any input information (input records, input output files) until `UpdateCompactionStats()` gets called. We cannot simply call `UpdateCompactionStats()` to fill in the input information in the remote compaction (which is a subcompaction of the primary host's compaction) because the `compaction->inputs()` have the full list of input files and `UpdateCompactionStats()` takes the entire list of records in all files. `num_input_records` gets double-counted if multiple sub-compactions are submitted to the remote worker.
The job level stats (in the case of remote compaction, it's subcompaction level stat), `compaction_job_stats_`, has the correct input records, but has no output information. We can use `UpdateCompactionJobStats(compaction_stats_.stats)` to set the output information (num_output_records, num_output_files, etc.) from the `compaction_stats_.stats`, but it also sets all other fields including the input information which sets all back to 0.
Therefore, we are overriding `UpdateCompactionJobStats()` in remote worker only to update job level stats, `compaction_job_stats_`, with output information of the internal stats.
Baiscally, we are merging the aggregated output info from the internal stats and aggregated input info from the compaction job stats.
In this PR we are also fixing how we are setting `is_remote_compaction` in CompactionJobStats.
- OnCompactionBegin event, if options.compaction_service is set, `is_remote_compaction=true` for all compactions except for trivial moves
- OnCompactionCompleted event, if any of the sub_compactions were done remotely, compaction level stats's `is_remote_compaction` will be true
Other minor changes
- num_output_records is already available in CompactionJobStats. No need to store separately in CompactionResult.
- total_bytes is not needed.
- Renamed `SubcompactionState::AggregateCompactionStats()` to `SubcompactionState::AggregateCompactionOutputStats()` to make it clear that it's only aggregating output stats.
- Renamed `SetTotalBytes()` to `AddBytesWritten()` to make it more clear that it's adding total written bytes from the compaction output.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13071
Test Plan:
Unit Tests added and updated
```
./compaction_service_test
```
Reviewed By: anand1976
Differential Revision: D64479657
Pulled By: jaykorean
fbshipit-source-id: a7a776a00dc718abae95d856b661bcbafd3b0ed5
Summary:
In https://github.com/facebook/rocksdb/issues/13025 , we made a change to load the latest options file in the remote worker instead of serializing the entire set of options.
That was done under assumption that OPTIONS file do not get purged often. While testing, we learned that this happens more often than we want it to be, so we want to prevent the OPTIONS file from getting purged anytime between when the remote compaction is scheduled and the option is loaded in the remote worker.
Like how we are protecting new SST files from getting purged using `min_pending_output`, we are doing the same by keeping track of `min_options_file_number`. Any OPTIONS file with number greater than `min_options_file_number` will be protected from getting purged. Just like `min_pending_output`, `min_options_file_number` gets bumped when the compaction is done. This is only applicable when `options.compaction_service` is set.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13074
Test Plan:
```
./compaction_service_test --gtest_filter="*PreservedOptionsLocalCompaction*"
./compaction_service_test --gtest_filter="*PreservedOptionsRemoteCompaction*"
```
Reviewed By: anand1976
Differential Revision: D64433795
Pulled By: jaykorean
fbshipit-source-id: 0d902773f0909d9481dec40abf0b4c54ce5e86b2
Summary:
- When `FileChecksumGenFactory` is set, include the `file_checksum` and `file_checksum_func_name` in the output file metadata
- ~~In Remote Compaction, try opening the output files in the temporary directory to do a quick sanity check before returning the result with status.~~
- After offline discussion, we decided to rely on Primary's existing Compaction flow to sanity check the output files. If the output file is corrupted, we will still be able to catch it and not installing it even after renaming them to cf_paths. The corrupted file in the cf_path won't be added to the MANIFEST and will be purged as part of the next `PurgeObsoleteFiles()` call.
- Unit Test has been added to validate above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13060
Test Plan:
Unit test added
```
./compaction_service_test --gtest_filter="*CorruptedOutput*"
./compaction_service_test --gtest_filter="*TruncatedOutput*"
./compaction_service_test --gtest_filter="*CustomFileChecksum*"
./compaction_job_test --gtest_filter="*ResultSerialization*"
```
Reviewed By: cbi42
Differential Revision: D64189645
Pulled By: jaykorean
fbshipit-source-id: 6cf28720169c960c80df257806bfee3c0d177159
Summary:
The write unix time from non L0 files are not surfaced properly because the level's wrapper iterator doesn't have a `write_unix_time` implementation that delegates to the corresponding file. The unit test didn't catch this because it incorrectly destroy the old db and reopen to check write time, instead of just reopen and check. This fix also include a change to support ldb's scan command to get write time for easier debugging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13057
Test Plan: Updated unit tests
Reviewed By: pdillinger
Differential Revision: D64015107
Pulled By: jowlyzhang
fbshipit-source-id: 244474f78a034f80c9235eea2aa8a0f4e54dff59
Summary:
The following DBOptions were not being propagated through BuildDBOptions, which could at least lead to settings being lost through `GetOptionsFromString()`, possibly elsewhere as well:
* background_close_inactive_wals
* write_dbid_to_manifest
* write_identity_file
* prefix_seek_opt_in_only
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13038
Test Plan:
This problem was not being caught by
OptionsSettableTest.DBOptionsAllFieldsSettable when the option was omitted from both options_helper.cc and options_settable_test.cc. I have added to the test to catch future instances (and the updated test was how I found three of the four missing options).
The same kind of bug seems to be caught by
ColumnFamilyOptionsAllFieldsSettable, and AFAIK analogous code does not exist for BlockBasedTableOptions.
Reviewed By: ltamasi
Differential Revision: D63483779
Pulled By: pdillinger
fbshipit-source-id: a5d5f6e434174bacb8e5d251b767e81e62b7225a
Summary:
When an item is inserted into the compressed secondary cache, this PR calculates the charge using the malloc_usable_size of the allocated memory, as well as the unique pointer allocation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13032
Test Plan: New unit test
Reviewed By: pdillinger
Differential Revision: D63418493
Pulled By: anand1976
fbshipit-source-id: 1db2835af6867442bb8cf6d9bf412e120ddd3824
Summary:
If the lowest_used_cache_tier DB option is set to kVolatileTier, skip insertion of compressed blocks into the secondary cache. Previously, these were always inserted into the secondary cache via the InsertSaved() method, leading to pollution of the secondary cache with blocks that would never be read.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13030
Test Plan: Add a new unit test
Reviewed By: pdillinger
Differential Revision: D63329841
Pulled By: anand1976
fbshipit-source-id: 14d2fce2ed309401d9ad4d2e7c356218b6673f7b
Summary:
Add the following to the `CompactionServiceJobInfo`
- compaction_reason
- is_full_compaction
- is_manual_compaction
- bottommost_level
Added `is_remote_compaction` to the `CompactionJobStats` and set initial values to avoid UB for uninitialized values.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13029
Test Plan:
```
./compaction_service_test --gtest_filter="*CompactionInfo*"
```
Reviewed By: anand1976
Differential Revision: D63322878
Pulled By: jaykorean
fbshipit-source-id: f02a66ca45e660b9d354a43837d8ec6beb7621fb
Summary:
With some new use cases onboarding to prefix extractors/seek/filters, one of the risks is existing iterator code, e.g. for maintenance tasks, being unintentionally subject to prefix seek semantics. This is a longstanding known design flaw with prefix seek, and `prefix_same_as_start` and `auto_prefix_mode` were steps in the direction of making that obsolete. However, we can't just immediately set `total_order_seek` to true by default, because that would impact so much code instantly.
Here we add a new DB option, `prefix_seek_opt_in_only` that basically allows users to transition to the future behavior when they are ready. When set to true, all iterators will be treated as if `total_order_seek=true` and then the only ways to get prefix seek semantics are with `prefix_same_as_start` or `auto_prefix_mode`.
Related fixes / changes:
* Make sure that `prefix_same_as_start` and `auto_prefix_mode` are compatible with (or override) `total_order_seek` (depending on your interpretation).
* Fix a bug in which a new iterator after dynamically changing the prefix extractor might mix different prefix semantics between memtable and SSTs. Both should use the latest extractor semantics, which means iterators ignoring memtable prefix filters with an old extractor. And that means passing the latest prefix extractor to new memtable iterators that might use prefix seek. (Without the fix, the test added for this fails in many ways.)
Suggested follow-up:
* Investigate a FIXME where a MergeIteratorBuilder is created in db_impl.cc. No unit test detects a change in value that should impact correctness.
* Make memtable prefix bloom compatible with `auto_prefix_mode`, which might require involving the memtablereps because we don't know at iterator creation time (only seek time) whether an auto_prefix_mode seek will be a prefix seek.
* Add `prefix_same_as_start` testing to db_stress
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13026
Test Plan:
tests updated, added. Add combination of `total_order_seek=true` and `auto_prefix_mode=true` to stress test. Ran `make blackbox_crash_test` for a long while.
Manually ran tests with `prefix_seek_opt_in_only=true` as default, looking for unexpected issues. I inspected most of the results and migrated many tests to be ready for such a change (but not all).
Reviewed By: ltamasi
Differential Revision: D63147378
Pulled By: pdillinger
fbshipit-source-id: 1f4477b730683d43b4be7e933338583702d3c25e
Summary:
We've been serializing and deserializing DBOptions and CFOptions (and other CF into) as part of `CompactionServiceInput`. These are all readily available in the OPTIONS file and the remote worker can read the OPTIONS file to obtain the same information. This helps reducing the size of payload significantly.
In a very rare scenario if the OPTIONS file is purged due to options change by primary host at the same time while the remote host is loading the latest options, it may fail. In this case, we just retry once.
This also solves the problem where we had to open the default CF with the CFOption from another CF if the remote compaction is for a non-default column family. (TODO comment in /db_impl_secondary.cc)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13025
Test Plan:
Unit Tests
```
./compaction_service_test
```
```
./compaction_job_test
```
Also tested with Meta's internal Offload Infra
Reviewed By: anand1976, cbi42
Differential Revision: D63100109
Pulled By: jaykorean
fbshipit-source-id: b7162695e31e2c5a920daa7f432842163a5b156d
Summary:
This PR allows a Cache object to be created using the object registry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13024
Reviewed By: pdillinger
Differential Revision: D63043233
Pulled By: anand1976
fbshipit-source-id: 5bc3f7c29b35ad62638ff8205451303e2cecea9d
Summary:
Per customer request, we should not merge multiple SST files together during temperature change compaction, since this can cause FIFO TTL compactions to be delayed. This PR changes the compaction picking logic to pick one file at a time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13018
Test Plan: * updated some existing unit tests to test this new behavior.
Reviewed By: jowlyzhang
Differential Revision: D62883292
Pulled By: cbi42
fbshipit-source-id: 6a9fc8c296b5d9b17168ef6645f25153241c8b93
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13022
Currently, `blob_garbage_collection_force_threshold` applies to the oldest batch of blob files, which is typically only a small subset of the blob files currently eligible for garbage collection. This can result in a form of head-of-line blocking: no GC-triggered compactions will be scheduled if the oldest batch does not currently exceed the threshold, even if a lot of higher-numbered blob files do. This can in turn lead to high space amplification that exceeds the soft bound implicit in the force threshold (e.g. 50% would suggest a space amp of <2 and 75% would imply a space amp of <4). The patch changes the semantics of this configuration threshold to apply to the entire set of blob files that are eligible for garbage collection based on `blob_garbage_collection_age_cutoff`. This provides more intuitive semantics for the option and can provide a better write amp/space amp trade-off. (Note that GC-triggered compactions still pick the same SST files as before, so triggered GC still targets the oldest the blob files.)
Reviewed By: jowlyzhang
Differential Revision: D62977860
fbshipit-source-id: a999f31fe9cdda313de513f0e7a6fc707424d4a3
Summary:
* Set write_dbid_to_manifest=true by default
* Add new option write_identity_file (default true) that allows us to opt-in to future behavior without identity file
* Refactor related DB open code to minimize code duplication
_Recommend hiding whitespace changes for review_
Intended follow-up: add support to ldb for reading and even replacing the DB identity in the manifest. Could be a variant of `update_manifest` command or based on it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13019
Test Plan: unit tests and stress test updated for new functionality
Reviewed By: anand1976
Differential Revision: D62898229
Pulled By: pdillinger
fbshipit-source-id: c08b25cf790610b034e51a9de0dc78b921abbcf0
Summary:
Add an option `--only_print_seqno_gaps` for wal dump to help with debugging. This option will check the continuity of sequence numbers in WAL logs, assuming `seq_per_batch` is false. `--walfile` option now also takes a directory, and it will check all WAL logs in the directory in chronological order.
When a gap is found, we can further check if it's related to operations like external file ingestion.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13014
Test Plan: Manually tested
Reviewed By: ltamasi
Differential Revision: D62989115
Pulled By: jowlyzhang
fbshipit-source-id: 22e3326344e7969ff9d5091d21fec2935770fbc7
Summary:
There was a subtle design/contract bug in the previous version of range filtering in experimental.h If someone implemented a key segments extractor with "all or nothing" fixed size segments, that could result in unsafe range filtering. For example, with two segments of width 3:
```
x = 0x|12 34 56|78 9A 00|
y = 0x|12 34 56||78 9B
z = 0x|12 34 56|78 9C 00|
```
Segment 1 of y (empty) is out of order with segment 1 of x and z.
I have re-worked the contract to make it clear what does work, and implemented a standard extractor for fixed-size segments, CappedKeySegmentsExtractor. The safe approach for filtering is to consume as much as is available for a segment in the case of a short key.
I have also added support for min-max filtering with reverse byte-wise comparator, which is probably the 2nd most common comparator for RocksDB users (because of MySQL). It might seem that a min-max filter doesn't care about forward or reverse ordering, but it does when trying to determine whether in input range from segment values v1 to v2, where it so happens that v2 is byte-wise less than v1, is an empty forward interval or a non-empty reverse interval. At least in the current setup, we don't have that context.
A new unit test (with some refactoring) tests CappedKeySegmentsExtractor, reverse byte-wise comparator, and the corresponding min-max filter.
I have also (contractually / mathematically) generalized the framework to comparators other than the byte-wise comparator, and made other generalizations to make the extractor limitations more explicitly connected to the particular filters and filtering used--at least in description.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13005
Test Plan: added unit tests as described
Reviewed By: jowlyzhang
Differential Revision: D62769784
Pulled By: pdillinger
fbshipit-source-id: 0d41f0d0273586bdad55e4aa30381ebc861f7044
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13015
`Close()`ing a database now releases tracked files in `SstFileManager`. Previously this space would be leaked until the database was later reopened.
Reviewed By: jowlyzhang
Differential Revision: D62590773
fbshipit-source-id: 5461bd253d974ac4967ad52fee92e2650f8a9a28
Summary:
A recent crash test failure shows that auto recovery from WAL write failure can cause CFs to be inconsistent. A unit test repro in P1569398553. The following is an example sequence of events:
```
0. manual_wal_flush is true. There are multiple CFs in a DB.
1. Submit a write batch with updates to multiple CF
2. A FlushWAL or a memtable swtich that will try to write the buffered WAL data. Fail this write so that buffered WAL data is dropped: https://github.com/facebook/rocksdb/blob/4b1d595306fae602b56d2aa5128b11b1162bfa81/file/writable_file_writer.cc#L624
The error needs to be retryable to start background auto recovery.
3. One CF successfully flushes its memtable during auto recovery.
4. Crash the process.
5. Reopen the DB, one CF will have the update as a result of successful flush. Other CFs will miss all the updates in the write batch since WAL does not have them.
```
This can happen if a users configures manual_wal_flush, uses more than one CF, and can hit retryable error for WAL writes. This PR is a short-term fix that upgrades WAL related errors to fatal and not trigger auto recovery.
A long-term fix may be not drop buffered WAL data by checking how much data is actually written, or require atomically flushing all column families during error recovery from this kind of errors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12995
Test Plan:
added unit test to check error severity and if recovery is triggered. A crash test repro command that fails in a few runs before this PR:
```
python3 ./tools/db_crashtest.py blackbox --interval=60 --metadata_write_fault_one_in=1000 --column_families=10 --exclude_wal_from_write_fault_injection=0 --manual_wal_flush_one_in=1000 --WAL_size_limit_MB=10240 --WAL_ttl_seconds=0 --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --adm_policy=1 --advise_random_on_open=1 --allow_data_in_errors=True --allow_fallocate=1 --async_io=0 --auto_readahead_size=0 --avoid_flush_during_recovery=1 --avoid_flush_during_shutdown=1 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --bgerror_resume_retry_interval=100 --block_align=1 --block_protection_bytes_per_key=0 --block_size=16384 --bloom_before_level=2147483647 --bottommost_compression_type=none --bottommost_file_compaction_delay=0 --bytes_per_sync=0 --cache_index_and_filter_blocks=1 --cache_index_and_filter_blocks_with_high_priority=1 --cache_size=33554432 --cache_type=auto_hyper_clock_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=1 --charge_filter_construction=1 --charge_table_reader=0 --check_multiget_consistency=0 --check_multiget_entity_consistency=0 --checkpoint_one_in=0 --checksum_type=kxxHash64 --clear_column_family_one_in=0 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=1 --compaction_readahead_size=1048576 --compaction_ttl=0 --compress_format_version=1 --compressed_secondary_cache_size=8388608 --compression_checksum=0 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=4 --compression_type=none --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --daily_offpeak_time_utc= --data_block_index_type=0 --db_write_buffer_size=0 --decouple_partitioned_filters=1 --default_temperature=kCold --default_write_temperature=kWarm --delete_obsolete_files_period_micros=30000000 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_file_deletions_one_in=1000000 --disable_manual_compaction_one_in=1000000 --disable_wal=0 --dump_malloc_stats=1 --enable_checksum_handoff=1 --enable_compaction_filter=0 --enable_custom_split_merge=0 --enable_do_not_compress_roles=0 --enable_index_compression=0 --enable_memtable_insert_with_hint_prefix_extractor=0 --enable_pipelined_write=1 --enable_sst_partitioner_factory=0 --enable_thread_tracking=1 --enable_write_thread_adaptive_yield=1 --error_recovery_with_no_fault_injection=1 --fail_if_options_file_error=1 --fifo_allow_compaction=1 --file_checksum_impl=big --fill_cache=1 --flush_one_in=1000000 --format_version=6 --get_all_column_family_metadata_one_in=1000000 --get_current_wal_file_one_in=0 --get_live_files_apis_one_in=10000 --get_properties_of_all_tables_one_in=1000000 --get_property_one_in=100000 --get_sorted_wal_files_one_in=0 --hard_pending_compaction_bytes_limit=274877906944 --index_block_restart_interval=4 --index_shortening=1 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --inplace_update_support=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --key_may_exist_one_in=100000 --last_level_temperature=kWarm --level_compaction_dynamic_level_bytes=0 --lock_wal_one_in=10000 --log_file_time_to_roll=0 --log_readahead_size=0 --long_running_snapshots=0 --lowest_used_cache_tier=2 --manifest_preallocation_size=5120 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=100000 --max_key_len=3 --max_log_file_size=0 --max_manifest_file_size=1073741824 --max_sequential_skip_in_iterations=16 --max_total_wal_size=0 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=10 --max_write_buffer_size_to_maintain=2097152 --memtable_insert_hint_per_batch=1 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0.001 --memtable_protection_bytes_per_key=2 --memtable_whole_key_filtering=0 --memtablerep=skip_list --metadata_charge_policy=1 --metadata_read_fault_one_in=0 --min_write_buffer_number_to_merge=1 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=2 --open_files=100 --open_metadata_read_fault_one_in=0 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --optimize_filters_for_hits=0 --optimize_filters_for_memory=0 --optimize_multiget_for_io=0 --paranoid_file_checks=1 --paranoid_memory_checks=0 --partition_filters=0 --partition_pinning=2 --pause_background_one_in=10000 --periodic_compaction_seconds=0 --prefix_size=8 --prefixpercent=5 --prepopulate_block_cache=0 --preserve_internal_time_seconds=0 --progress_reports=0 --promote_l0_one_in=0 --read_amp_bytes_per_bit=0 --read_fault_one_in=0 --readahead_size=524288 --readpercent=45 --recycle_log_file_num=0 --reopen=0 --report_bg_io_stats=0 --reset_stats_one_in=10000 --sample_for_compression=5 --secondary_cache_fault_one_in=0 --secondary_cache_uri= --set_options_one_in=10000 --skip_stats_update_on_db_open=1 --snapshot_hold_ops=100000 --soft_pending_compaction_bytes_limit=1048576 --sqfc_name=bar --sqfc_version=1 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=600 --stats_history_buffer_size=1048576 --strict_bytes_per_sync=1 --subcompactions=2 --sync=0 --sync_fault_injection=1 --table_cache_numshardbits=6 --target_file_size_base=524288 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=3 --uncache_aggressiveness=8 --universal_max_read_amp=-1 --unpartitioned_pinning=2 --use_adaptive_mutex=1 --use_adaptive_mutex_lru=0 --use_attribute_group=1 --use_delta_encoding=0 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=1 --use_multi_cf_iterator=1 --use_multi_get_entity=0 --use_multiget=0 --use_put_entity_one_in=1 --use_sqfc_for_range_queries=0 --use_timed_put_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_compression=1 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=none --write_buffer_size=4194304 --write_dbid_to_manifest=0 --write_fault_one_in=50 --writepercent=35 --ops_per_thread=100000 --preserve_unverified_changes=1
```
Reviewed By: hx235
Differential Revision: D62888510
Pulled By: cbi42
fbshipit-source-id: 308bdbbb8d897cc8eba950155cd0e37cf7eb76fe
Summary: I came across this code while buckifying parts of folly and fizz in open source. This is pretty hacky code and cleaning it up doesn't seem that hard, so I did it.
Reviewed By: zertosh, pdillinger
Differential Revision: D62781766
fbshipit-source-id: 43714bce992c53149d1e619063d803297362fb5d
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13010
The OnAddFile cur_compactions_reserved_size_ accounting causes wraparound when re-opening a database with an unowned SstFileManager and during recovery. It was introduced in #4164 which addresses out of space recovery with an unclear purpose. Compaction jobs do this accounting via EnoughRoomForCompaction/OnCompactionCompletion and to my understanding would never reuse a sst file name.
Reviewed By: anand1976
Differential Revision: D62535775
fbshipit-source-id: a7c44d6e0a4b5ff74bc47abfe57c32ca6770243d
Summary:
For SST checksum mismatch corruptions in the read path, RocksDB retries the read if the underlying file system supports verification and reconstruction of data (`FSSupportedOps::kVerifyAndReconstructRead`). There were a couple of places where the retry was missing - reading the SST footer and the properties block. This PR fixes the retry in those cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13007
Test Plan: Add new unit tests
Reviewed By: jaykorean
Differential Revision: D62519186
Pulled By: anand1976
fbshipit-source-id: 50aa38f18f2a53531a9fc8d4ccdf34fbf034ed59
Summary:
in ReFitLevel(), we were not setting being_compacted to false after ReFitLevel() is done. This is not a issue if refit level is successful, since new FileMetaData is created for files at the target level. However, if there's an error during RefitLevel(), e.g., Manifest write failure, we should clear the being_compacted field for these files. Otherwise, these files will not be picked for compaction until db reopen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13009
Test Plan:
existing test.
- stress test failure in T200339331 should not happen anymore.
Reviewed By: hx235
Differential Revision: D62597169
Pulled By: cbi42
fbshipit-source-id: 0ba659806da6d6d4b42384fc95268b2d7bad720e
Summary:
Prepare this internal API to be used by atomic data replacement. The main purpose of this API is to get a `VersionEdit` to mark the entire current `MemTableListVersion` as dropped. Flush needs the similar functionality when installing results, so that logic is refactored into a util function `GetDBRecoveryEditForObsoletingMemTables` to be shared by flush and this internal API.
To test this internal API, flush's result installation is redirected to use this API when it is flushing all the immutable MemTables in debug mode. It should achieve the exact same results, just with a duplicated `VersionEdit::log_number` field that doesn't upsets the recovery logic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13001
Test Plan: Existing tests
Reviewed By: pdillinger
Differential Revision: D62309591
Pulled By: jowlyzhang
fbshipit-source-id: e25914d9a2e281c25ab7ee31a66eaf6adfae4b88
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13004
The patch extends the buckifier script so it generates a target for `db_bench` as well.
Reviewed By: cbi42
Differential Revision: D62407071
fbshipit-source-id: 0cb98a324ce0598ad84a8675aa77b7d0f91bf40c
Summary:
Add the `ApplyToHandle` method to the `Cache` interface to allow a caller to request the invocation of a callback on the given cache handle. The goal here is to allow a cache that manages multiple cache instances to use a callback on a handle to determine which instance it belongs to. For example, the callback can hash the key and use that to pick the correct target instance. This is useful to redirect methods like `Ref` and `Release`, which don't know the cache key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12987
Reviewed By: pdillinger
Differential Revision: D62151907
Pulled By: anand1976
fbshipit-source-id: e4ffbbb96eac9061d2ab0e7e1739eea5ebb1cd58
Summary:
`Compaction` is already creating its own ref for the input Version: https://github.com/facebook/rocksdb/blob/4b1d595306fae602b56d2aa5128b11b1162bfa81/db/compaction/compaction.cc#L73
And properly Unref it during destruction:
https://github.com/facebook/rocksdb/blob/4b1d595306fae602b56d2aa5128b11b1162bfa81/db/compaction/compaction.cc#L450
This PR redirects compaction's access of `cfd->current()` to this input `Version`, to prepare for when a column family's data can be replaced all together, and `cfd->current()` is not safe to access for a compaction job. Because a new `Version` with just some other external files could be installed as `cfd->current()`. The compaction job's expectation of the current `Version` and the corresponding storage info to always have its input files will no longer be guaranteed.
My next follow up is to do a similar thing for flush, also to prepare it for when a column family's data can be replaced. I will make it create its own reference of the current `MemTableListVersion` and use it as input, all flush job's access of memtables will be wired to that input `MemTableListVersion`. Similarly this reference will be unreffed during a flush job's destruction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12992
Test Plan: Existing tests
Reviewed By: pdillinger
Differential Revision: D62212625
Pulled By: jowlyzhang
fbshipit-source-id: 9a781213469cf366857a128d50a702af683a046a
Summary:
The `SchedulePending*` API is a bit confusing since it doesn't immediately schedule the work and can be confused with the actual scheduling. So I have changed these to be `EnqueuePending*` and added some documentation for the corresponding state transitions of these background work.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12994
Test Plan: existing tests
Reviewed By: cbi42
Differential Revision: D62252746
Pulled By: jowlyzhang
fbshipit-source-id: ee68be6ed33070cad9a5004b7b3e16f5bcb041bf
Summary:
* https://github.com/facebook/rocksdb/issues/12936 was insufficient to fix the std::optional false positives. Making a fix validated in CI this time (see https://github.com/facebook/rocksdb/issues/12991)
* valgrind grinds to a halt on startup on my dev machine apparently because it expects internet access. Disable its attempts to access the internet when git is using a proxy.
* Move PORTABLE=1 from CI job to the Makefile. Without it, valgrind complains about illegal instructions (too new)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12990
Test Plan: manual, watch nightly valgrind job
Reviewed By: ltamasi
Differential Revision: D62203242
Pulled By: pdillinger
fbshipit-source-id: a611b08da7dbd173b0709ed7feb0578729553a17
Summary:
It appears the arm testsuite is failing because it is building without snappy, which is causing the SST files not to be compressed, which somehow causes these tests to fail. Manually setting LZ4 which is already required.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12993
Test Plan: reproduced and verified fix on ARM laptop
Reviewed By: anand1976
Differential Revision: D62216451
Pulled By: pdillinger
fbshipit-source-id: 3f21fcd9be0edaa66c7eca0cb7d56b998171e263
Summary:
`ignore_unknown_options=true` had an undocumented behavior of having no effect (disallow unknown options) if reading from the same or older major.minor version. Presumably this was intended to catch unintentional addition of new options in a patch release, but there is no automated version compatibility testing between patch releases. So this was a bad choice without such testing support, because it just means users would hit the failure in case of adding features to a patch release.
In this diff we respect ignore_unknown_options when reading a file from any newer version, even patch versions, and document this behavior in the API.
I don't think it's practical or necessary to test among patch releases in check_format_compatible.sh. This seems like an exceptional case of applying a *different semantics* to patch version updates than to minor/major versions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12989
Test Plan: unit test updated (and refactored)
Reviewed By: jaykorean
Differential Revision: D62168738
Pulled By: pdillinger
fbshipit-source-id: fb3c3ef30f0bbad0d5ffcc4570fb9ef963e7daac
Summary:
`check_format_compatible` script was broken due to extra comma added in 5b8f5cbcf4
e.g. https://github.com/facebook/rocksdb/actions/runs/10505042711/job/29101787220
```
...
2024-08-23T11:44:15.0175202Z == Building 9.5.fb, debug
2024-08-23T11:44:15.0190592Z fatal: ambiguous argument '_tmp_origin/9.5.fb,': unknown revision or path not in the working tree.
...
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12988
Test Plan:
```
tools/check_format_compatible.sh
```
```
== Use HEAD (48339d2a65670211bc9c204364a2127ba9b2a460) to open DB generated using 8.6.fb...
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/8.6.fb to /tmp/rocksdb_format_compatible_jewoongh/db/8.6.fb/db_dump.txt
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/current to /tmp/rocksdb_format_compatible_jewoongh/db/current/db_dump.txt
== Use HEAD (48339d2a65670211bc9c204364a2127ba9b2a460) to open DB generated using 8.7.fb...
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/8.7.fb to /tmp/rocksdb_format_compatible_jewoongh/db/8.7.fb/db_dump.txt
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/current to /tmp/rocksdb_format_compatible_jewoongh/db/current/db_dump.txt
== Use HEAD (48339d2a65670211bc9c204364a2127ba9b2a460) to open DB generated using 8.8.fb...
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/8.8.fb to /tmp/rocksdb_format_compatible_jewoongh/db/8.8.fb/db_dump.txt
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/current to /tmp/rocksdb_format_compatible_jewoongh/db/current/db_dump.txt
== Use HEAD (48339d2a65670211bc9c204364a2127ba9b2a460) to open DB generated using 8.9.fb...
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/8.9.fb to /tmp/rocksdb_format_compatible_jewoongh/db/8.9.fb/db_dump.txt
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/current to /tmp/rocksdb_format_compatible_jewoongh/db/current/db_dump.txt
== Use HEAD (48339d2a65670211bc9c204364a2127ba9b2a460) to open DB generated using 8.10.fb...
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/8.10.fb to /tmp/rocksdb_format_compatible_jewoongh/db/8.10.fb/db_dump.txt
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/current to /tmp/rocksdb_format_compatible_jewoongh/db/current/db_dump.txt
== Use HEAD (48339d2a65670211bc9c204364a2127ba9b2a460) to open DB generated using 8.11.fb...
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/8.11.fb to /tmp/rocksdb_format_compatible_jewoongh/db/8.11.fb/db_dump.txt
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/current to /tmp/rocksdb_format_compatible_jewoongh/db/current/db_dump.txt
== Use HEAD (48339d2a65670211bc9c204364a2127ba9b2a460) to open DB generated using 9.0.fb...
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/9.0.fb to /tmp/rocksdb_format_compatible_jewoongh/db/9.0.fb/db_dump.txt
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/current to /tmp/rocksdb_format_compatible_jewoongh/db/current/db_dump.txt
== Use HEAD (48339d2a65670211bc9c204364a2127ba9b2a460) to open DB generated using 9.1.fb...
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/9.1.fb to /tmp/rocksdb_format_compatible_jewoongh/db/9.1.fb/db_dump.txt
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/current to /tmp/rocksdb_format_compatible_jewoongh/db/current/db_dump.txt
== Use HEAD (48339d2a65670211bc9c204364a2127ba9b2a460) to open DB generated using 9.2.fb...
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/9.2.fb to /tmp/rocksdb_format_compatible_jewoongh/db/9.2.fb/db_dump.txt
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/current to /tmp/rocksdb_format_compatible_jewoongh/db/current/db_dump.txt
== Use HEAD (48339d2a65670211bc9c204364a2127ba9b2a460) to open DB generated using 9.3.fb...
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/9.3.fb to /tmp/rocksdb_format_compatible_jewoongh/db/9.3.fb/db_dump.txt
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/current to /tmp/rocksdb_format_compatible_jewoongh/db/current/db_dump.txt
== Use HEAD (48339d2a65670211bc9c204364a2127ba9b2a460) to open DB generated using 9.4.fb...
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/9.4.fb to /tmp/rocksdb_format_compatible_jewoongh/db/9.4.fb/db_dump.txt
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/current to /tmp/rocksdb_format_compatible_jewoongh/db/current/db_dump.txt
== Use HEAD (48339d2a65670211bc9c204364a2127ba9b2a460) to open DB generated using 9.5.fb...
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/9.5.fb to /tmp/rocksdb_format_compatible_jewoongh/db/9.5.fb/db_dump.txt
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/current to /tmp/rocksdb_format_compatible_jewoongh/db/current/db_dump.txt
== Use HEAD (48339d2a65670211bc9c204364a2127ba9b2a460) to open DB generated using 9.6.fb...
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/9.6.fb to /tmp/rocksdb_format_compatible_jewoongh/db/9.6.fb/db_dump.txt
== Dumping data from /tmp/rocksdb_format_compatible_jewoongh/db/current to /tmp/rocksdb_format_compatible_jewoongh/db/current/db_dump.txt
==== Compatibility Test PASSED ====
```
Reviewed By: pdillinger
Differential Revision: D62162454
Pulled By: jaykorean
fbshipit-source-id: 562225c6cb27e0eb66f241a6f9424dc624d8c837
Summary:
Met the following error while compiling the project.
```
build_tools/check-sources.sh
utilities/fault_injection_fs.cc:509: // If there<E2><80><99>s no injected error, then cb will be called asynchronously when
utilities/fault_injection_fs.cc:510: // target_ actually finishes the read. But if there<E2><80><99>s an injected error, it
utilities/fault_injection_fs.cc:512: // isn<E2><80><99>t invoked at all.
^^^^ Use only ASCII characters in source files
make[1]: *** [Makefile:1291: check-sources] Error 1
make[1]: Leaving directory '/home/janus/Github/symious/rocksdb'
make: *** [Makefile:1084: check] Error 2
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12972
Reviewed By: hx235
Differential Revision: D61923865
Pulled By: cbi42
fbshipit-source-id: 63af0a38fea15e09a860895bdd5ed0a57700e447
Summary:
Add option `IngestExternalFileOptions::link_files` that hard links input files and preserves original file links after ingestion, unlike `move_files` which will unlink input files after ingestion. This can be useful when being used together with `allow_db_generated_files` to ingest files from another DB. Also reverted the change to `move_files` in https://github.com/facebook/rocksdb/issues/12959 to simplify the contract so that it will always unlink input files without exception.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12980
Test Plan: updated unit test `ExternSSTFileLinkFailFallbackTest.LinkFailFallBackExternalSst` to test that input files will not be unlinked.
Reviewed By: pdillinger
Differential Revision: D61925111
Pulled By: cbi42
fbshipit-source-id: eadaca72e1ae5288bdd195d57158466e5656fa62
Summary:
There are several crash test failures due to DB verification failure. Retain some trace history in the expected state directory to make debugging easier.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12978
Reviewed By: cbi42
Differential Revision: D61864921
Pulled By: anand1976
fbshipit-source-id: 9f3f37b7e1e958bc89a3cf0373182354c2c1aa3b
Summary:
Followed instruction per https://docs.github.com/en/actions/writing-workflows/workflow-syntax-for-github-actions#defining-access-for-the-github_token-scopes
It turns out that we did not need any of these except `Metadata: read`.
Before
```
GITHUB_TOKEN Permissions
Actions: write
Attestations: write
Checks: write
Contents: write
Deployments: write
Discussions: write
Issues: write
Metadata: read
Packages: write
Pages: write
PullRequests: write
RepositoryProjects: write
SecurityEvents: write
Statuses: write
```
After
```
GITHUB_TOKEN Permissions
Metadata: read
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12973
Test Plan: GitHub Actions triggered by this PR
Reviewed By: cbi42
Differential Revision: D61812651
Pulled By: jaykorean
fbshipit-source-id: 4413756c93f503e8b2fb77eb8b684ef9e6a6c13d
Summary:
so `IngestExternalFileOptions::move_files` and `IngestExternalFileOptions::allow_db_generated_files` are now compatible. The original file links won't be removed if `allow_db_generated_files` is true. This is to prevent deleting files from another DB.
There was a [comment](https://github.com/facebook/rocksdb/pull/12750#discussion_r1684509620) in https://github.com/facebook/rocksdb/issues/12750 about how exactly-once ingestion would work with `move_files`. I've discussed with customer and decided that it can be done by reading the target DB to see if it contains any ingested key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12959
Test Plan: updated unit tests `IngestDBGeneratedFileTest*` to enable `move_files`.
Reviewed By: jowlyzhang
Differential Revision: D61703480
Pulled By: cbi42
fbshipit-source-id: 6b4294369767f989a2f36bbace4ca3c0257aeaf7
Summary:
.. so that appropriate implementations can return temperature information from GetChildrenFileAttributes
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12965
Test Plan: just an API placeholder for now
Reviewed By: anand1976
Differential Revision: D61748199
Pulled By: pdillinger
fbshipit-source-id: b457e324cb451e836611a0bf630c3da0f30a8abf
Summary:
We have a request to use the cold tier as primary source of truth for the DB, and to best support such use cases and to complement the existing options controlling SST file temperatures, we add two new DB options:
* `metadata_write_temperature` for DB "small" files that don't contain much user data
* `wal_write_temperature` for WALs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12957
Test Plan: Unit test included, though it's hard to be sure we've covered all the places
Reviewed By: jowlyzhang
Differential Revision: D61664815
Pulled By: pdillinger
fbshipit-source-id: 8e19c9dd8fd2db059bb15f74938d6bc12002e82b
Summary:
Disabling the job temporarily. We will re-enable this when ready again
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12964
Reviewed By: ltamasi
Differential Revision: D61740941
Pulled By: jaykorean
fbshipit-source-id: 167e50c4f5e38d508a8e56633261611467f30690
Summary:
Issue: MultiGet(PinnableSlice) can't read out all timestamps.
Fixed the impl, and added an UT as well. In the original impl, if MultiGet reads multiple column families, a later column family would clean up timestamps of previous column family.
Fix: https://github.com/facebook/rocksdb/issues/12950#issue-2476996580
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12943
Reviewed By: anand1976
Differential Revision: D61729257
Pulled By: pdillinger
fbshipit-source-id: 55267c26076c8a59acedd27e14714711729a40df
Summary:
When merged into internal code base we see the following error. This should fix it.
```
Actions failed:
[2024-08-20T07:45:53.879-07:00] Action failed: fbcode//rocksdb/src:rocksdb_lib (cfg:macos-arm64-macosx-clang17-no-san#e5847010950663ca) (cxx_compile util/write_batch_util.cc)
[2024-08-20T07:45:53.879-07:00] Remote command returned non-zero exit code 1
[2024-08-20T07:45:53.879-07:00] Remote action, reproduce with: `frecli cas download-action 2fe3749f2d3ea6107cce103d4e2be1dcc76a9df797bae308cde5eaccc65201b7:145`
fbcode/rocksdb/src/include/rocksdb/write_batch.h:460:14: error: no template named 'unordered_map' in namespace 'std'; did you mean 'unordered_set'?
const std::unordered_map<uint32_t, size_t>& GetColumnFamilyToTimestampSize() {
~~~~~^~~~~~~~~~~~~
fbcode/rocksdb/src/include/rocksdb/write_batch.h:540:8: error: no template named 'unordered_map' in namespace 'std'; did you mean 'unordered_set'?
std::unordered_map<uint32_t, size_t> cf_id_to_ts_sz_;
~~~~~^~~~~~~~~~~~~
/paragon/pods/259551525/home/execution/3/202ac945754041b6bc424b0c35e42c9d/work/buck-out/v2/gen/fbsource/a90614bbe22ec1d7/xplat/toolchains/minimal_xcode/__clang_genrule__/out/Toolchains/XcodeDefault.xctoolchain/usr/bin/../include/c++/v1/__memory/compressed_pair.h:113:3: error: static_assert failed due to requirement '!is_same<unsigned long, unsigned long>::value' "__compressed_pair cannot be instantiated when T1 and T2 are the same type; The current implementation is NOT ABI-compatible with the previous implementation for this configuration"
static_assert((!is_same<_T1, _T2>::value),
^ ~~~~~~~~~~~~~~~~~~~~~~~~~
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12949
Test Plan: CI
Reviewed By: jowlyzhang, cbi42
Differential Revision: D61577604
Pulled By: jaykorean
fbshipit-source-id: 3584a2cd550a303346d80ccc5cc90f4a9b3e2da2
Summary:
This pull request transitions the benchmarking process from CircleCI to GitHub Actions. The benchmarking jobs will now be executed on a self-hosted runner. Unlike the previous CircleCI configuration, where jobs were queued due to the long execution time (nearly 60 minutes per job), the new setup schedules the benchmarking tasks to run every two hours.
Closes https://github.com/facebook/rocksdb/issues/12615
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12885
Reviewed By: pdillinger
Differential Revision: D61422468
Pulled By: jaykorean
fbshipit-source-id: 10535865c849797825f9652e4e9ef367b3d73599
Summary:
# Summary
Mistakenly double-updated the HISTORY.md file by running `unreleased_history/release.sh` after the first commit in https://github.com/facebook/rocksdb/issues/12945. Manually fixing the file to reflect the correct content
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12947
Test Plan: N/A. History file change.
Reviewed By: cbi42
Differential Revision: D61512756
Pulled By: jaykorean
fbshipit-source-id: 50dc7e92a945fa80c7dfd01cc89243fd5eaf0548
Summary:
Main branch cut at defd97bc9.
Updated HISTORY.md, version and format compatibility test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12945
Test Plan: CI
Reviewed By: jowlyzhang
Differential Revision: D61482149
Pulled By: jaykorean
fbshipit-source-id: 4edf7c0a8c6e4df8fcc938bc778dfd02981d0c55
Summary:
add a new CF option `paranoid_memory_checks` that allows additional data integrity validations during read/scan. Currently, skiplist-based memtable will validate the order of keys visited. Further data validation can be added in different layers. The option will be opt-in due to performance overhead.
The motivation for this feature is for services where data correctness is critical and want to detect in-memory corruption earlier. For a corrupted memtable key, this feature can help to detect it during during reads instead of during flush with existing protections (OutputValidator that verifies key order or per kv checksum). See internally linked task for more context.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12889
Test Plan:
* new unit test added for paranoid_memory_checks=true.
* existing unit test for paranoid_memory_checks=false.
* enable in stress test.
Performance Benchmark: we check for performance regression in read path where data is in memtable only. For each benchmark, the script was run at the same time for main and this PR:
* Memtable-only randomread ops/sec:
```
(for I in $(seq 1 50);do ./db_bench --benchmarks=fillseq,readrandom --write_buffer_size=268435456 --writes=250000 --num=250000 --reads=500000 --seed=1723056275 2>&1 | grep "readrandom"; done;) | awk '{ t += $5; c++; print } END { print 1.0 * t / c }';
Main: 608146
PR with paranoid_memory_checks=false: 607727 (- %0.07)
PR with paranoid_memory_checks=true: 521889 (-%14.2)
```
* Memtable-only sequential scan ops/sec:
```
(for I in $(seq 1 50); do ./db_bench--benchmarks=fillseq,readseq[-X10] --write_buffer_size=268435456 --num=1000000 --seed=1723056275 2>1 | grep "\[AVG 10 runs\]"; done;) | awk '{ t += $6; c++; print; } END { printf "%.0f\n", 1.0 * t / c }';
Main: 9180077
PR with paranoid_memory_checks=false: 9536241 (+%3.8)
PR with paranoid_memory_checks=true: 7653934 (-%16.6)
```
* Memtable-only reverse scan ops/sec:
```
(for I in $(seq 1 20); do ./db_bench --benchmarks=fillseq,readreverse[-X10] --write_buffer_size=268435456 --num=1000000 --seed=1723056275 2>1 | grep "\[AVG 10 runs\]"; done;) | awk '{ t += $6; c++; print; } END { printf "%.0f\n", 1.0 * t / c }';
Main: 1285719
PR with integrity_checks=false: 1431626 (+%11.3)
PR with integrity_checks=true: 811031 (-%36.9)
```
The `readrandom` benchmark shows no regression. The scanning benchmarks show improvement that I can't explain.
Reviewed By: pdillinger
Differential Revision: D60414267
Pulled By: cbi42
fbshipit-source-id: a70b0cbeea131f1a249a5f78f9dc3a62dacfaa91
Summary:
Add an optional callback function upon remote compaction temp output installation. This will be internally used for setting the final status in the Offload Infra.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12940
Test Plan:
Unit Test added
```
./compaction_service_test
```
_Also internally tested by manually merging into internal code base_
Reviewed By: anand1976
Differential Revision: D61419157
Pulled By: jaykorean
fbshipit-source-id: 66831685bc403949c26bfc65840dd1900d2a5a67
Summary:
This PR make best efforts recovery more permissive by allowing it to recover incomplete Version that presents a valid point in time view from the user's perspective. Currently, a Version is only valid and saved if all files consisting that Version can be found. With this change, if only a suffix of L0 files (and their associated blob files) are missing, a valid Version is also available to be saved and recover to. Note that we don't do this if the column family was atomically flushed. Because atomic flush also need a consistent view across the column families, we cannot guarantee that if we are recovering to incomplete version.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12938
Test Plan: Existing tests and added unit tests.
Reviewed By: anand1976
Differential Revision: D61414381
Pulled By: jowlyzhang
fbshipit-source-id: f9b73deb34d35ad696ab42315928b656d586262a
Summary:
Partitioned metadata blocks were introduced back in 2017 to deal more gracefully with large DBs where RAM is relatively scarce and some data might be much colder than other data. The feature allows metadata blocks to compete for memory in the block cache against data blocks while alleviating tail latencies and thrash conditions that can arise with large metadata blocks (sometimes megabytes each) that can arise with large SST files. In general, the cost to partitioned metadata is more CPU in accesses (especially for filters where more binary search is needed before hashing can be used) and a bit more memory fragmentation and related overheads.
However the feature has always had a subtle limitation with a subtle effect on performance: index partitions and filter partitions must be cut at the same time, regardless of which wins the space race (hahaha) to metadata_block_size. Commonly filters will be a few times larger than indexes, so index partitions will be under-sized compared to filter (and data) blocks. While this does affect fragmentation and related overheads a bit, I suspect the bigger impact on performance is in the block cache. The coupling of the partition cuts would be defensible if the binary search done to find the filter block was used (on filter hit) to short-circuit binary search to an index partition, but that optimization has not been developed.
Consider two metadata blocks, an under-sized one and a normal-sized one, covering proportional sections of the key space with the same density of read queries. The under-sized one will be more prone to eviction from block cache because it is used less often. This is unfair because of its despite its proportionally smaller cost of keeping in block cache, and most of the cost of a miss to re-load it (random IO) is not proportional to the size (similar latency etc. up to ~32KB).
## This change
Adds a new table option decouple_partitioned_filters allows filter blocks and index blocks to be cut independently. To make this work, the partitioned filter block builder needs to know about the previous key, to generate an appropriate separator for the partition index. In most cases, BlockBasedTableBuilder already has easy access to the previous key to provide to the filter block builder.
This change includes refactoring to pass that previous key to the filter builder when available, with the filter building caching the previous key itself when unavailable, such as during compression dictionary training and some unit tests. Access to the previous key eliminates the need to track the previous prefix, which results in a small SST construction CPU win in prefix filtering cases, regardless of coupling, and possibly a small regression for some non-prefix cases, regardless of coupling, but still overall improvement especially with https://github.com/facebook/rocksdb/issues/12931.
Suggested follow-up:
* Update confusing use of "last key" to refer to "previous key"
* Expand unit test coverage with parallel compression and dictionary training
* Consider an option or enhancement to alleviate under-sized metadata blocks "at the end" of an SST file due to no coordination or awareness of when files are cut.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12939
Test Plan:
unit tests updated. Also did some unit test runs with "hard wired" usage of parallel compression and dictionary training code paths to ensure they were working. Also ran blackbox_crash_test for a while with the new feature.
## SST write performance (CPU)
Using the same testing setup as in https://github.com/facebook/rocksdb/issues/12931 but with -decouple_partitioned_filters=1 in the "after" configuration, which benchmarking shows makes almost no difference in terms of SST write CPU. "After" vs. "before" this PR
```
-partition_index_and_filters=0 -prefix_size=0 -whole_key_filtering=1
923691 vs. 924851 (-0.13%)
-partition_index_and_filters=0 -prefix_size=8 -whole_key_filtering=0
921398 vs. 922973 (-0.17%)
-partition_index_and_filters=0 -prefix_size=8 -whole_key_filtering=1
902259 vs. 908756 (-0.71%)
-partition_index_and_filters=1 -prefix_size=8 -whole_key_filtering=0
917932 vs. 916901 (+0.60%)
-partition_index_and_filters=1 -prefix_size=8 -whole_key_filtering=0
912755 vs. 907298 (+0.60%)
-partition_index_and_filters=1 -prefix_size=8 -whole_key_filtering=1
899754 vs. 892433 (+0.82%)
```
I think this is a pretty good trade, especially in attracting more movement toward partitioned configurations.
## Read performance
Let's see how decoupling affects read performance across various degrees of memory constraint. To simplify LSM structure, we're using FIFO compaction. Since decoupling will overall increase metadata block size, we control for this somewhat with an extra "before" configuration with larger metadata block size setting (8k instead of 4k). Basic setup:
```
(for CS in 0300 1200; do TEST_TMPDIR=/dev/shm/rocksdb1 ./db_bench -benchmarks=fillrandom,flush,readrandom,block_cache_entry_stats -num=5000000 -duration=30 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=10 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters=1 -statistics=1 -cache_size=${CS}000000 -metadata_block_size=4096 -decouple_partitioned_filters=1 2>&1 | tee results-$CS; done)
```
And read ops/s results:
```CSV
Cache size MB,After/decoupled/4k,Before/4k,Before/8k
3,15593,15158,12826
6,16295,16693,14134
10,20427,20813,18459
20,27035,26836,27384
30,33250,31810,33846
60,35518,32585,35329
100,36612,31805,35292
300,35780,31492,35481
1000,34145,31551,35411
1100,35219,31380,34302
1200,35060,31037,34322
```
If you graph this with log scale on the X axis (internal link: https://pxl.cl/5qKRc), you see that the decoupled/4k configuration is essentially the best of both the before/4k and before/8k configurations: handles really tight memory closer to the old 4k configuration and handles generous memory closer to the old 8k configuration.
Reviewed By: jowlyzhang
Differential Revision: D61376772
Pulled By: pdillinger
fbshipit-source-id: fc2af2aee44290e2d9620f79651a30640799e01f
Summary:
This is in part a refactoring / simplification to set up for "decoupled" partitioned filters and in part to fix an intentional regression for a correctness fix in https://github.com/facebook/rocksdb/issues/12872. Basically, we are taking out some complexity of the filter block builders, and pushing part of it (simultaneous de-duplication of prefixes and whole keys) into the filter bits builders, where it is more efficient by operating on hashes (rather than copied keys).
Previously, the FullFilterBlockBuilder had a somewhat fragile and confusing set of conditions under which it would keep a copy of the most recent prefix and most recent whole key, along with some other state that is essentially redundant. Now we just track (always) the previous prefix in the PartitionedFilterBlockBuilder, to deal with the boundary prefix Seek filtering problem. (Btw, the next PR will optimize this away since BlockBasedTableReader already tracks the previous key.) And to deal with the problem of de-duplicating both whole keys and prefixes going into a single filter, we add a new function to FilterBitsBuilder that has that extra de-duplication capabilty, which is relatively efficient because we only have to cache an extra 64-bit hash, not a copied key or prefix. (The API of this new function is somewhat awkward to avoid a small CPU regression in some cases.)
Also previously, there was awkward logic split between FullFilterBlockBuilder and PartitionedFilterBlockBuilder to deal with some things specific to partitioning. And confusing names like Add vs. AddKey. FullFilterBlockBuilder is much cleaner and simplified now.
The splitting of PartitionedFilterBlockBuilder::MaybeCutAFilterBlock into DecideCutAFilterBlock and CutAFilterBlock is to address what would have been a slight performance regression in some cases. The split allows for more intruction-level parallelism by reducing unnecessary control dependencies.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12931
Test Plan:
existing tests (with some minor updates)
Also manually ported over the pre-broken regression test described in
https://github.com/facebook/rocksdb/issues/12870 and ran it (passed).
Performance:
Here we validate that an entire series of recent related PRs are a net improvement in aggregate. "Before" is with these PRs reverted: https://github.com/facebook/rocksdb/issues/12872#12911https://github.com/facebook/rocksdb/issues/12874#12867https://github.com/facebook/rocksdb/issues/12903#12904. "After" includes this PR (and all
of those, with base revision 16c21af). Simultaneous test script designed to maximally depend on SST construction efficiency:
```
for PF in 0 1; do for PS in 0 8; do for WK in 0 1; do [ "$PS" == "$WK" ] || (for I in `seq 1 20`; do TEST_TMPDIR=/dev/shm/rocksdb2 ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -memtablerep=vector -allow_concurrent_memtable_write=0 -bloom_bits=10 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters=$PF -prefix_size=$PS -whole_key_filtering=$WK 2>&1 | grep micros/op; done) | awk '{ t += $5; c++; print } END { print 1.0 * t / c }'; echo "Was -partition_index_and_filters=$PF -prefix_size=$PS -whole_key_filtering=$WK"; done; done; done) | tee results
```
Showing average ops/sec of "after" vs. "before"
```
-partition_index_and_filters=0 -prefix_size=0 -whole_key_filtering=1
935586 vs. 928176 (+0.79%)
-partition_index_and_filters=0 -prefix_size=8 -whole_key_filtering=0
930171 vs. 926801 (+0.36%)
-partition_index_and_filters=0 -prefix_size=8 -whole_key_filtering=1
910727 vs. 894397 (+1.8%)
-partition_index_and_filters=1 -prefix_size=0 -whole_key_filtering=1
929795 vs. 922007 (+0.84%)
-partition_index_and_filters=1 -prefix_size=8 -whole_key_filtering=0
921924 vs. 917285 (+0.51%)
-partition_index_and_filters=1 -prefix_size=8 -whole_key_filtering=1
903393 vs. 887340 (+1.8%)
```
As one would predict, the most improvement is seen in cases where we have optimized away copying the whole key.
Reviewed By: jowlyzhang
Differential Revision: D61138271
Pulled By: pdillinger
fbshipit-source-id: 427cef0b1465017b45d0a507bfa7720fa20af043
Summary:
`VersionEditHandlerPointInTime` is tracking found files, missing files, intermediate files in order to decide to build a `Version` on negative edge trigger (transition from valid to invalid) without applying the current `VersionEdit`. However, applying `VersionEdit` and check completeness of a `Version` are specialization of `VersionBuilder`. More importantly, when we augment best efforts recovery to recover not just complete point in time Version but also a prefix of seqno for a point in time Version, such checks need to be duplicated in `VersionEditHandlerPointInTime` and `VersionBuilder`.
To avoid this, this refactor move all the file tracking functionality in `VersionEditHandlerPointInTime` into `VersionBuilder`. To continue to let `VersionEditHandlerPIT` do the edge trigger check and build a `Version` before applying the current `VersionEdit`, a suite of APIs to supporting creating a save point and its associated functions are added in `VersionBuilder` to achieve this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12928
Test Plan: Existing tests
Reviewed By: anand1976
Differential Revision: D61171320
Pulled By: jowlyzhang
fbshipit-source-id: 604f66f8b1e3a3e13da59d8ba357c74e8a366dbc
Summary:
Add a couple of ticker stats for corruption retry count and successful retries. This PR also eliminates an extra read attempt when there's a checksum mismatch in a block read from the prefetch buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12923
Test Plan: Update existing tests
Reviewed By: jowlyzhang
Differential Revision: D61024687
Pulled By: anand1976
fbshipit-source-id: 3a08403580ab244000e0d480b7ee0f5a03d76b06
Summary:
**Context/Summary:** .... since it won't work in the PrepareDelete() path
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12932
Test Plan: CI
Reviewed By: cbi42
Differential Revision: D61155155
Pulled By: hx235
fbshipit-source-id: 99b0784f6c903d70c7b3b88b53ae8e2c885de96f
Summary:
this testcase set syncpoint function which reference this test case heap variable "enable_per_key_placement_" and this sync point function will be triggered by another testcase, so asan will report asan heap use after free error
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12908
Reviewed By: hx235
Differential Revision: D60973363
Pulled By: cbi42
fbshipit-source-id: df4f488f51e7741784d5a92fc0a5fc538c5d5b1a
Summary:
**Context:**
https://github.com/facebook/rocksdb/pull/12838 allows a write thread encountered certain injected error to release the lock and sleep before retrying write in order to reduce performance cost. This requires adding checks like [this](https://github.com/facebook/rocksdb/blob/b26b395e0a15255d322be08110db551976188745/db_stress_tool/expected_value.cc#L29-L31) to prevent writing to the same key from another thread.
The added check causes a false-positive failure when delete range + file ingestion + backup is used. Consider the following scenario:
(1) Issue a delete range covering some key that do not exist and a key does exist (named as k1). k1 will have "pending delete" state while the keys that does not exit will have whatever state they already have since we don't delete a key that does not exist already.
(2) After https://github.com/facebook/rocksdb/pull/12838, `PrepareDeleteRange(... &prepared)` will return `prepared = false`. So below logic will be executed and k1's "pending delete" won't get roll-backed nor committed.
```
std::vector<PendingExpectedValue> pending_expected_values =
shared->PrepareDeleteRange(rand_column_family, rand_key,
rand_key + FLAGS_range_deletion_width,
&prepared);
if (!prepared) {
for (PendingExpectedValue& pending_expected_value :
pending_expected_values) {
pending_expected_value.PermitUnclosedPendingState();
}
return s;
}
```
(3) Issue an file ingestion covering k1 and another key k2. Similar to (2), we will have `shared->PreparePut(column_family, key, &prepared)` return `prepared = false` for k1 while k2 will have a "pending put" state. So below logic will be executed and k2's "pending put" state won't get roll-backed nor committed.
```
for (int64_t key = key_base;
s.ok() && key < shared->GetMaxKey() &&
static_cast<int32_t>(keys.size()) < FLAGS_ingest_external_file_width;
++key)
PendingExpectedValue pending_expected_value =
shared->PreparePut(column_family, key, &prepared);
if (!prepared) {
pending_expected_value.PermitUnclosedPendingState();
for (PendingExpectedValue& pev : pending_expected_values) {
pev.PermitUnclosedPendingState();
}
return;
}
}
```
(4) Issue a backup and verify on k2. Below logic decides that k2 should exist in restored DB since it has a pending write state while k2 is never ingested into the original DB as (3) returns early.
```
bool Exists() const { return PendingPut() || !IsDeleted(); }
TestBackupRestore() {
...
Status get_status = restored_db->Get(
read_opts, restored_cf_handles[rand_column_families[i]], key,
&restored_value);
bool exists = thread->shared->Exists(rand_column_families[i], rand_keys[0]);
if (get_status.ok()) {
if (!exists && from_latest && ShouldAcquireMutexOnKey()) {
std::ostringstream oss;
oss << "0x" << key.ToString(true)
<< " exists in restore but not in original db";
s = Status::Corruption(oss.str());
}
} else if (get_status.IsNotFound()) {
if (exists && from_latest && ShouldAcquireMutexOnKey()) {
std::ostringstream oss;
oss << "0x" << key.ToString(true)
<< " exists in original db but not in restore";
s = Status::Corruption(oss.str());
}
}
...
}
```
So we see false-positive corruption like `Failure in a backup/restore operation with: Corruption: 0x000000000000017B0000000000000073787878 exists in original db but not in restore`
A simple fix is to remove `PendingPut()` from `bool Exists() ` since it's called under a lock and should never see a pending write. However, in order for "under a lock and should never see a pending write" to be true, we need to remove the logic of releasing the lock during sleep in the write thread, which expose pending write to other thread that can call Exists() like back up thread.
The downside of holding lock during sleep is blocking other write thread of the same key to proceed cuz they need to wait for the lock. This should happen rarely as the key of a thread is selected randomly in crash test like below.
```
void StressTest::OperateDb(ThreadState* thread) {
for (uint64_t i = 0; i < ops_per_open; i++) {
...
int64_t rand_key = GenerateOneKey(thread, i);
...
}
}
```
**Summary:**
- Removed the "lock release" part and related checks
- Printed recovery time if the write thread waited more than 10 seconds
- Reverted regression in testing coverage when deleting a non-existent key
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12917
Test Plan:
Below command repro-ed frequently before the fix and not after.
```
./db_stress --WAL_size_limit_MB=1 --WAL_ttl_seconds=60 --acquire_snapshot_one_in=0 --adaptive_readahead=0 --adm_policy=1 --advise_random_on_open=1 --allow_concurrent_memtable_write=0 --allow_data_in_errors=True --allow_fallocate=0 --allow_setting_blob_options_dynamically=1 --async_io=0 --auto_readahead_size=1 --avoid_flush_during_recovery=0 --avoid_flush_during_shutdown=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=0 --bgerror_resume_retry_interval=100 --blob_cache_size=8388608 --blob_compaction_readahead_size=1048576 --blob_compression_type=none --blob_file_size=1073741824 --blob_file_starting_level=1 --blob_garbage_collection_age_cutoff=0.0 --blob_garbage_collection_force_threshold=0.75 --block_align=0 --block_protection_bytes_per_key=8 --block_size=16384 --bloom_before_level=2147483647 --bloom_bits=16.216959977115277 --bottommost_compression_type=xpress --bottommost_file_compaction_delay=600 --bytes_per_sync=262144 --cache_index_and_filter_blocks=1 --cache_index_and_filter_blocks_with_high_priority=1 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=0 --charge_filter_construction=0 --charge_table_reader=1 --check_multiget_consistency=0 --check_multiget_entity_consistency=0 --checkpoint_one_in=1000000 --checksum_type=kXXH3 --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=1000 --compact_range_one_in=0 --compaction_pri=3 --compaction_readahead_size=0 --compaction_ttl=10 --compress_format_version=2 --compressed_secondary_cache_size=8388608 --compression_checksum=0 --compression_max_dict_buffer_bytes=2097151 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=zlib --compression_use_zstd_dict_trainer=0 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --daily_offpeak_time_utc=04:00-08:00 --data_block_index_type=0 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --db_write_buffer_size=0 --default_temperature=kUnknown --default_write_temperature=kWarm --delete_obsolete_files_period_micros=21600000000 --delpercent=0 --delrangepercent=5 --destroy_db_initially=0 --detect_filter_construct_corruption=1 --disable_file_deletions_one_in=10000 --disable_manual_compaction_one_in=1000000 --disable_wal=0 --dump_malloc_stats=0 --enable_blob_files=0 --enable_blob_garbage_collection=1 --enable_checksum_handoff=1 --enable_compaction_filter=1 --enable_custom_split_merge=1 --enable_do_not_compress_roles=0 --enable_index_compression=1 --enable_memtable_insert_with_hint_prefix_extractor=0 --enable_pipelined_write=1 --enable_sst_partitioner_factory=1 --enable_thread_tracking=0 --enable_write_thread_adaptive_yield=0 --error_recovery_with_no_fault_injection=1 --exclude_wal_from_write_fault_injection=1 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=0 --fifo_allow_compaction=1 --file_checksum_impl=big --fill_cache=1 --flush_one_in=1000000 --format_version=2 --get_all_column_family_metadata_one_in=10000 --get_current_wal_file_one_in=0 --get_live_files_apis_one_in=1000000 --get_properties_of_all_tables_one_in=100000 --get_property_one_in=100000 --get_sorted_wal_files_one_in=0 --hard_pending_compaction_bytes_limit=2097152 --high_pri_pool_ratio=0.5 --index_block_restart_interval=1 --index_shortening=2 --index_type=0 --ingest_external_file_one_in=1000 --initial_auto_readahead_size=0 --inplace_update_support=0 --iterpercent=0 --key_len_percent_dist=1,30,69 --key_may_exist_one_in=100 --last_level_temperature=kUnknown --level_compaction_dynamic_level_bytes=0 --lock_wal_one_in=10000 --log2_keys_per_lock=10 --log_file_time_to_roll=0 --log_readahead_size=0 --long_running_snapshots=1 --low_pri_pool_ratio=0.5 --lowest_used_cache_tier=1 --manifest_preallocation_size=0 --manual_wal_flush_one_in=0 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=16384 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=100000 --max_key_len=3 --max_log_file_size=1048576 --max_manifest_file_size=1073741824 --max_sequential_skip_in_iterations=16 --max_total_wal_size=0 --max_write_batch_group_size_bytes=16 --max_write_buffer_number=10 --max_write_buffer_size_to_maintain=8388608 --memtable_insert_hint_per_batch=1 --memtable_max_range_deletions=1000 --memtable_prefix_bloom_size_ratio=0.001 --memtable_protection_bytes_per_key=4 --memtable_whole_key_filtering=1 --memtablerep=skip_list --metadata_charge_policy=1 --metadata_read_fault_one_in=0 --metadata_write_fault_one_in=0 --min_blob_size=16 --min_write_buffer_number_to_merge=2 --mmap_read=0 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_read_fault_one_in=0 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=20000000 --optimize_filters_for_hits=1 --optimize_filters_for_memory=0 --optimize_multiget_for_io=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=1 --pause_background_one_in=10000 --periodic_compaction_seconds=10 --prefix_size=8 --prefixpercent=0 --prepopulate_blob_cache=1 --prepopulate_block_cache=1 --preserve_internal_time_seconds=0 --progress_reports=0 --promote_l0_one_in=0 --read_amp_bytes_per_bit=0 --read_fault_one_in=0 --readahead_size=524288 --readpercent=60 --recycle_log_file_num=1 --reopen=20 --report_bg_io_stats=0 --reset_stats_one_in=1000000 --sample_for_compression=5 --secondary_cache_fault_one_in=0 --secondary_cache_uri= --skip_stats_update_on_db_open=1 --snapshot_hold_ops=100000 --soft_pending_compaction_bytes_limit=68719476736 --sqfc_name=foo --sqfc_version=1 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=10 --stats_history_buffer_size=1048576 --strict_bytes_per_sync=1 --subcompactions=2 --sync=0 --sync_fault_injection=0 --table_cache_numshardbits=0 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=3 --uncache_aggressiveness=118 --universal_max_read_amp=-1 --unpartitioned_pinning=0 --use_adaptive_mutex=0 --use_adaptive_mutex_lru=1 --use_attribute_group=0 --use_blob_cache=0 --use_delta_encoding=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=0 --use_multi_cf_iterator=0 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=0 --use_shared_block_and_blob_cache=1 --use_sqfc_for_range_queries=1 --use_timed_put_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_compression=0 --verify_db_one_in=10000 --verify_file_checksums_one_in=1000000 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=none --write_buffer_size=33554432 --write_dbid_to_manifest=0 --write_fault_one_in=0 --writepercent=35
```
Reviewed By: cbi42
Differential Revision: D60890580
Pulled By: hx235
fbshipit-source-id: 401f90d6d351c7ee11088cad06fb00e54062d416
Summary:
I was investigating a crash test failure with "Corruption: SST file is ahead of WALs" which I haven't reproduced, but I did reproduce a data loss issue on recovery which I suspect could be the same root problem. The problem is already somewhat known (see https://github.com/facebook/rocksdb/issues/12403 and https://github.com/facebook/rocksdb/issues/12639) where it's only safe to recovery multiple recycled WAL files with trailing old data if the sequence numbers between them are adjacent (to ensure we didn't lose anything in the corrupt/obsolete WAL tail).
However, aside from disableWAL=true, there are features like external file ingestion that can increment the sequence numbers without writing to the WAL. It is simply unsustainable to worry about this kind of feature interaction limiting where we can consume sequence numbers. It is very hard to test and audit as well. For reliable crash recovery of recycled WALs, we need a better way of detecting that we didn't drop data from one WAL to the next.
Until then, let's disable WAL recycling in the crash test, to help stabilize it.
Ideas for follow-up to fix the underlying problem:
(a) With recycling, we could always sync the WAL before opening the next one. HOWEVER, this potentially very large sync could cause a big hiccup in writes (vs. O(1) sized manifest sync).
(a1) The WAL sync could ensure it is truncated to size, or
(a2) By requiring track_and_verify_wals_in_manifest, we could assume that the last synced size in the manifest is the final usable size of the WAL. (It might also be worth avoiding truncating recycled WALs.)
(b) Add a new mechanism to record and verify the final size of a WAL without requiring a sync.
(b1) By requiring track_and_verify_wals_in_manifest, this could be new WAL metadata recorded in the manifest (at the time of switching WALs). Note that new fields of WalMetadata are not forward-compatible, but a new kind of manifest record (next to WalAddition, WalDeletion; e.g. WalCompletion) is IIRC forward-compatible.
(b2) A new kind of WAL header entry (not forward compatible, unfortunately) could record the final size of the previous WAL.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12918
Test Plan: Added disabled reproducer for non-linear data loss on recovery
Reviewed By: hx235
Differential Revision: D60917527
Pulled By: pdillinger
fbshipit-source-id: 3663d79aec81851f5cf41669f84a712bb4563fd7
Summary:
Ahead of a "decoupled" variant of partitioned filters, refactoring this unit test file to make it easier to incorporate that new variant.
* bool test param to new enum class FilterPartitioning
* Some cases of iterating over that bool to new parameterized test
* Combine some common functionality for configuring parameterized options
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12911
Test Plan: no production changes, and no intentional changes to scope or conditions of tests
Differential Revision: D60701287
fbshipit-source-id: 3497e3230e29a4f62c934bcb75693965a2df41d8
Summary:
**Context/Summary:**
`CleanStagingDirectory()` is called when the temporary .tmp folder we use to create checkpoint is not empty to begin with.
Expanded fault injection can make this call fail e.g, `Delete file /dev/shm/rocksdb_test/rocksdb_crashtest_blackbox/.checkpoint17.tmp/012393.sst -- IO error: injected metadata write error`.
But The result of `CleanStagingDirectory()` is ignored in `CreateCheckpoint()`. So the injected IO error can't be propagated to db stress test and handled correctly. Hence we see `While mkdir: /dev/shm/rocksdb_test/rocksdb_crashtest_blackbox/.checkpoint17.tmp: File exists` when we try to re-use a non-empty .tmp folder for new snapshots.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12894
Test Plan: Monitor CI
Reviewed By: ltamasi
Differential Revision: D60422849
Pulled By: hx235
fbshipit-source-id: 6f735c98eaa05d2b97ba4f781e0928357a50377a
Summary:
In normal use cases, meta info like column family's timestamp size is tracked at the transaction layer, so it's not necessary and even detrimental to track such info inside the internal WriteBatch because it may let anti-patterns like bypassing Transaction write APIs and directly write to its internal WriteBatch like this:
https://github.com/facebook/mysql-5.6/blob/9d0a754dc9973af0508b3ba260fc337190a3218f/storage/rocksdb/ha_rocksdb.cc#L4949-L4950
Setting this option to true will keep aforementioned use case continue to work before it's refactored out. This option is only for this purpose and it will be gradually deprecated after aforementioned MyRocks use case are refactored.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12864
Test Plan: Added unit tests
Reviewed By: cbi42
Differential Revision: D60194094
Pulled By: jowlyzhang
fbshipit-source-id: 64a98822167e99aa7e4fa2a60085d44a5deaa45c
Summary:
https://github.com/facebook/rocksdb/issues/12891 updated this deletion rate in the test to be much higher, which makes the test flaky. The rate is being intentionally set to very low to maximize the retention of a ".log.trash" file after DB closes. This PR just change it back.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12915
Reviewed By: ltamasi
Differential Revision: D60776312
Pulled By: jowlyzhang
fbshipit-source-id: d193557a042c65816fcc337cceb09905e042e9f6
Summary:
Make `DestroyDB` slowly delete files if it's configured and enabled via `SstFileManager`.
It's currently not available mainly because of DeleteScheduler's logic related to tracked total_size_ and total_trash_size_. These accounting and logic should not be applied to `DestroyDB`. This PR adds a `DeleteUnaccountedDBFile` util for this purpose which deletes files without accounting it. This util also supports assigning a file to a specified trash bucket so that user can later wait for a specific trash bucket to be empty. For `DestroyDB`, files with more than 1 hard links will be deleted immediately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12891
Test Plan: Added unit tests, existing tests.
Reviewed By: anand1976
Differential Revision: D60300220
Pulled By: jowlyzhang
fbshipit-source-id: 8b18109a177a3a9532f6dc2e40e08310c08ca3c7
Summary:
Was checking == a desired number of entries added to a filter, when the combination of whole key and prefix filtering could add more than one entry per table internal key. This could lead to unnecessarily large filter partitions, which could affect performance and block cache fairness.
Also (only somewhat related because of other work in progress):
* Some variable renaming and a new assertion in BlockBasedTableBuilder, to add some clarity.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12904
Test Plan:
If you add assertion logic to the base revision checking that the partition cut is requested whenever `keys_added_to_partition_ >= keys_per_partition_`, it fails on a number of db_bloom_filter_test tests. However, such an assertion in the revised code would be essentially redundant with the new logic.
If I added a regression test for this, it would be tricky and fragile, so I don't think it's important enough to chase and maintain. (Open to suggestions / input.)
Reviewed By: jowlyzhang
Differential Revision: D60557827
Pulled By: pdillinger
fbshipit-source-id: 77a56097d540da6e7851941a26d26ced2d944373
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12910
There is currently a call to `GetBGError()` in `DBImpl::WriteImplWALOnly()` where the DB mutex is (incorrectly) not held, leading to a data race. Technically, we could acquire the mutex here but instead, the patch removes the affected check altogether, since the same check is already performed (in a thread-safe manner) in the subsequent call to `PreprocessWrite()`.
Reviewed By: cbi42
Differential Revision: D60682008
fbshipit-source-id: 54b67975dcf57d67c068cac71e8ada09a1793ec5
Summary:
This is ahead of some related changes/enhancements. Refactorings here:
* Restructure some state of PartitionedFilterBlockBuilder to reduce redundancy in state tracking, improve clarity.
* Changed some function signatures to better match standard practice (return Status)
* Improve comments, arrange related fields
* Discourage/prevent production use of Finish without status (now TEST_Finish)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12903
Test Plan: existing tests
Reviewed By: jowlyzhang
Differential Revision: D60548613
Pulled By: pdillinger
fbshipit-source-id: d7dbc79951fcc3b837877227d58f713698ad2596
Summary:
In leveled compaction, we pick intra-L0 compaction instead of L0->Lbase whenever L0 size is small. When L0 files contain many deletions, it makes more sense to compact then down instead of accumulating tombstones in L0. This PR uses compensated_file_size when computing L0 size for determining intra-L0 compaction. Also scale down the limit on total L0 size further to be more cautious about accumulating data in L0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12878
Test Plan: updated unit test.
Reviewed By: hx235
Differential Revision: D59932421
Pulled By: cbi42
fbshipit-source-id: 9de973ac51eb7df81b38b8c68110072b1aa06321
Summary:
As titled. The `emplace_back` below will add the same collector factory again during Reopen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12907
Reviewed By: pdillinger
Differential Revision: D60614170
Pulled By: jowlyzhang
fbshipit-source-id: a79498d209e4910a5e94a5cb742935015277918c
Summary: https://github.com/facebook/rocksdb/pull/12801 updated the version of `folly` used in RocksDB builds to a revision that requires `g++` version 10 when built with a GNU toolchain. This shouldn't really matter for this nightly GitHub Actions job, since we're supposed to be building with `clang++-13`; however, due to the way the compilers had been set, seems like we were historically only building RocksDB with `clang` (and `folly` with `gcc-9`, which led to a broken build after the update). Attempt to fix this by setting `CC` / `CXX` to `clang` / `clang++` in the job's environment.
Reviewed By: pdillinger
Differential Revision: D60534452
fbshipit-source-id: c7b5a02409fb1ea50e4524731237f7bc8d3f7ca6
Summary:
Crash test encountered this failure:
```file ingestion error: Corruption: properties unsorted under specified IngestExternalFileOptions: move_files: 0, verify_checksums_before_ingest: 1, verify_checksums_readahead_size: 1048576 (Empty string or missing field indicates default option or value is used```
Further inspection showed out of order table properties in an external file created by `SstFileWriter` for ingestion, and the file is likely created like this because it passed the initial checksum check. This change added some assertions to check invariant at the properties creation and collecting side.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12898
Test Plan: Existing tests
Reviewed By: hx235
Differential Revision: D60459817
Pulled By: jowlyzhang
fbshipit-source-id: 91474943d2f9d7795f00b6031c08a13ab91e2470
Summary:
A crash test failure in log sync in DBImpl::WriteToWAL is due to a missed case in https://github.com/facebook/rocksdb/issues/12734. Just need to apply similar logic from DBImpl::SyncWalImpl to check for an already closed WAL (nullptr writer). This is extremely rare because it only comes from failed Sync on a closed WAL.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12899
Test Plan: watch crash test
Reviewed By: cbi42
Differential Revision: D60481652
Pulled By: pdillinger
fbshipit-source-id: 4a176bb6a53dcf077f88344710a110c2f946c386
Summary:
The `PessimisticTransaction::SetName()` code checks for an existing txn of the given name before registering the new txn. However, this is not atomic, which could result in a race condition if two txns try to register with the same name. Both might succeed and lead to unpredictable behavior. This PR makes the test and set atomic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12895
Reviewed By: pdillinger
Differential Revision: D60460482
Pulled By: anand1976
fbshipit-source-id: e8afeb2356e1b8f4e8df785cb73532739f82579d
Summary:
By reusing an object that owns a vector. The vector allocation/sizing was substantial in a CPU profile.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12893
Test Plan: existing tests
Reviewed By: jowlyzhang
Differential Revision: D60405139
Pulled By: pdillinger
fbshipit-source-id: 8bfbc07cd9b4829f2ac9015e90f2b4eba61fd984
Summary:
As titled. This PR adds a `TransactionDBOptions` field `enable_udt_validation` to allow user to toggle the timestamp based validation behavior across the whole DB. When it is true, which is the default value and the existing behavior. A recap of what this behavior is: `GetForUpdate` does timestamp based conflict checking to make sure no other transaction has committed a version of the key tagged with a timestamp equal to or newer than the calling transaction's `read_timestamp_` the user set via `SetReadTimestampForValidation`. When this field is set to false, we disable timestamp based validation for the whole DB. MyRocks find it hard to find a read timestamp for this validation API, so we added this flexibility.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12857
Test Plan: Added unit test
Reviewed By: ltamasi
Differential Revision: D60194134
Pulled By: jowlyzhang
fbshipit-source-id: b8507f8ddc37fc7a2948cf492ce5c599ae646fef
Summary:
**Context/Summary:**
We discovered the following false positive in our crash test lately:
(1) PUT() writes k/v to WAL but fails in `ApplyWALToManifest()`. The k/v is in the WAL
(2) Current stress test logic will rollback the expected state of such k/v since PUT() fails
(3) If the DB crashes before recovery finishes and reopens, the WAL will be replayed and the k/v is in the DB while the expected state have been roll-backed.
We decided to leave those expected state to be pending until the loop-write of the same key succeeds.
Bonus: Now that I realized write to manifest can also fail the write which faces the similar problem as https://github.com/facebook/rocksdb/pull/12797, I decided to disable fault injection on user write per thread (instead of globally) when tracing is needed for prefix recovery; some refactory
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12838
Test Plan:
Rehearsal CI
Run below command (varies on sync_fault_injection=1,0 to verify ExpectedState behavior) for a while to ensure crash recovery validation works fine
```
python3 tools/db_crashtest.py --simple blackbox --interval=30 --WAL_size_limit_MB=0 --WAL_ttl_seconds=0 --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --adm_policy=1 --advise_random_on_open=0 --allow_concurrent_memtable_write=0 --allow_data_in_errors=True --allow_fallocate=0 --async_io=0 --auto_readahead_size=0 --avoid_flush_during_recovery=0 --avoid_flush_during_shutdown=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --bgerror_resume_retry_interval=1000000 --block_align=1 --block_protection_bytes_per_key=4 --block_size=16384 --bloom_before_level=4 --bloom_bits=56.810257702625165 --bottommost_compression_type=none --bottommost_file_compaction_delay=0 --bytes_per_sync=262144 --cache_index_and_filter_blocks=1 --cache_index_and_filter_blocks_with_high_priority=1 --cache_size=8388608 --cache_type=auto_hyper_clock_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=1 --charge_filter_construction=1 --charge_table_reader=0 --check_multiget_consistency=0 --check_multiget_entity_consistency=1 --checkpoint_one_in=10000 --checksum_type=kxxHash --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=1000 --compact_range_one_in=1000 --compaction_pri=4 --compaction_readahead_size=1048576 --compaction_ttl=10 --compress_format_version=1 --compressed_secondary_cache_ratio=0.0 --compressed_secondary_cache_size=0 --compression_checksum=0 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 --compression_type=none --compression_use_zstd_dict_trainer=0 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --daily_offpeak_time_utc=04:00-08:00 --data_block_index_type=1 --db_write_buffer_size=0 --default_temperature=kWarm --default_write_temperature=kCold --delete_obsolete_files_period_micros=30000000 --delpercent=20 --delrangepercent=20 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_file_deletions_one_in=10000 --disable_manual_compaction_one_in=1000000 --disable_wal=0 --dump_malloc_stats=0 --enable_checksum_handoff=1 --enable_compaction_filter=0 --enable_custom_split_merge=0 --enable_do_not_compress_roles=0 --enable_index_compression=1 --enable_memtable_insert_with_hint_prefix_extractor=0 --enable_pipelined_write=0 --enable_sst_partitioner_factory=0 --enable_thread_tracking=0 --enable_write_thread_adaptive_yield=0 --error_recovery_with_no_fault_injection=1 --exclude_wal_from_write_fault_injection=0 --fail_if_options_file_error=1 --fifo_allow_compaction=0 --file_checksum_impl=crc32c --fill_cache=1 --flush_one_in=1000000 --format_version=3 --get_all_column_family_metadata_one_in=1000000 --get_current_wal_file_one_in=0 --get_live_files_apis_one_in=1000000 --get_properties_of_all_tables_one_in=1000000 --get_property_one_in=100000 --get_sorted_wal_files_one_in=0 --hard_pending_compaction_bytes_limit=274877906944 --high_pri_pool_ratio=0.5 --index_block_restart_interval=4 --index_shortening=2 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --inplace_update_support=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --key_may_exist_one_in=100 --last_level_temperature=kWarm --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=10000 --log_file_time_to_roll=60 --log_readahead_size=16777216 --long_running_snapshots=1 --low_pri_pool_ratio=0 --lowest_used_cache_tier=0 --manifest_preallocation_size=0 --manual_wal_flush_one_in=0 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=16384 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=100000 --max_key_len=3 --max_log_file_size=1048576 --max_manifest_file_size=32768 --max_sequential_skip_in_iterations=1 --max_total_wal_size=0 --max_write_batch_group_size_bytes=16 --max_write_buffer_number=10 --max_write_buffer_size_to_maintain=8388608 --memtable_insert_hint_per_batch=1 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0.01 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --memtablerep=skip_list --metadata_charge_policy=1 --metadata_read_fault_one_in=0 --metadata_write_fault_one_in=8 --min_write_buffer_number_to_merge=1 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=1 --open_files=-1 --open_metadata_read_fault_one_in=0 --open_metadata_write_fault_one_in=8 --open_read_fault_one_in=0 --open_write_fault_one_in=8 --ops_per_thread=100000000 --optimize_filters_for_hits=1 --optimize_filters_for_memory=1 --optimize_multiget_for_io=1 --paranoid_file_checks=0 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=1000000 --periodic_compaction_seconds=2 --prefix_size=7 --prefixpercent=0 --prepopulate_block_cache=0 --preserve_internal_time_seconds=0 --progress_reports=0 --promote_l0_one_in=0 --read_amp_bytes_per_bit=0 --read_fault_one_in=1000 --readahead_size=524288 --readpercent=10 --recycle_log_file_num=1 --reopen=0 --report_bg_io_stats=0 --reset_stats_one_in=1000000 --sample_for_compression=0 --secondary_cache_fault_one_in=0 --set_options_one_in=0 --skip_stats_update_on_db_open=1 --snapshot_hold_ops=100000 --soft_pending_compaction_bytes_limit=68719476736 --sqfc_name=foo --sqfc_version=0 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=10 --stats_history_buffer_size=0 --strict_bytes_per_sync=1 --subcompactions=4 --sync=1 --sync_fault_injection=0 --table_cache_numshardbits=6 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=2 --uncache_aggressiveness=239 --universal_max_read_amp=-1 --unpartitioned_pinning=1 --use_adaptive_mutex=1 --use_adaptive_mutex_lru=1 --use_attribute_group=0 --use_delta_encoding=0 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=0 --use_multi_cf_iterator=0 --use_multi_get_entity=0 --use_multiget=0 --use_put_entity_one_in=0 --use_sqfc_for_range_queries=1 --use_timed_put_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_compression=0 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=none --write_buffer_size=33554432 --write_dbid_to_manifest=0 --write_fault_one_in=8 --writepercent=40
```
Reviewed By: cbi42
Differential Revision: D59377075
Pulled By: hx235
fbshipit-source-id: 91f602fd67e2d339d378cd28b982095fd073dcb6
Summary:
This PR fix `VersionSet`'s `manifest_number_` could be pointing to an invalid number intermediately. This happens when a new manifest roll is attempted but fast failed after loading table handlers and before the new manifest file creation/writing is actually attempted.
In theory, a later manifest roll effort will overthrow this intermediate invalid in memory state. There is on harm when the DB crashes in this invalid state either. But efforts that takes a file snapshot of the DB like backup will incorrectly try to copy a non existing manifest file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12882
Reviewed By: cbi42
Differential Revision: D60204956
Pulled By: jowlyzhang
fbshipit-source-id: effbdb124b582f879d114988af06ac63867fc549
Summary:
MultiCfIterators (`CoalescingIterator` and `AttributeGroupIterator`) are not yet compatible with write-prepared/write-unprepared transactions, yet (write-committed is fine). This fix includes the following.
- Properly return `ErrorIterator` if the user attempts to use the `CoalescingIterator` or `AttributeGroupIterator` in WritePreparedTxnDB (and WriteUnpreparedTxnDB)
- Set `use_multi_cf_iterator = 0` if `use_txn=1` and `txn_write_policy != 0 (WRITE_COMMITTED)` in stress test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12883
Test Plan:
Works
```
./db_stress ... --use_txn=1 --txn_write_policy=0 --use_multi_cf_iterator=1
```
Fails
```
./db_stress ... --use_txn=1 --txn_write_policy=1 --use_multi_cf_iterator=1
```
Reviewed By: cbi42
Differential Revision: D60190784
Pulled By: jaykorean
fbshipit-source-id: 3bc1093e81a4ef5753ba9b32c5aea997c21bfd33
Summary:
Something I am working on is going to expand usage of `BlockBasedTableBuilder::Rep::last_key`, but the existing code contract for `IndexBuilder::AddIndexEntry` makes that difficult because it modifies its `last_key` parameter to be the separator value recorded in the index, often something between the two boundary keys.
This change primarily changes the contract of that function and related functions to separate function inputs and outputs, without sacrificing efficiency. For efficiency, a reusable scratch string buffer is provided by the caller, which the callee can use (or not) in returning a result Slice. That should yield a performance improvement as we are reusing a buffer for keys rather than copying into a new one each time in the FindShort* functions, without any additional string copies or conditional branches.
Additional improvements in PartitionedIndexBuilder specifically:
* Reduce string copies by eliminating `sub_index_last_key_` and instead tracking the key for the next partition in a placeholder Entry.
* Simplify code and improve code quality by changing `sub_index_builder_` to unique_ptr.
* Eliminate unnecessary NewFlushBlockPolicy call/object.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12867
Test Plan: existing tests, crash test. Will validate performance along with the change this is setting up.
Reviewed By: anand1976
Differential Revision: D59793119
Pulled By: pdillinger
fbshipit-source-id: 556da75cf13b967511f84702b2713d152f536a07
Summary:
**Context/Summary:**
We recently discovered a case where write of the same key right after error recovery of a previous failed write of the same key finishes causes two same WAL entries, violating our assertion. This is because we don't advance seqno on failed write and reuse the same WAL containing the failed write for the new write if the memtable at the time is empty.
This PR reuses the flush path for an empty memtable to switch WAL and update min WAL to keep in error recovery flush
as well as updates the INFO log message for clarity.
```
2024/07/17-15:01:32.271789 327757 (Original Log Time 2024/07/17-15:01:25.942234) [/flush_job.cc:1017] [default] [JOB 2] Level-0 flush table https://github.com/facebook/rocksdb/issues/9: 0 bytes OK It's an empty SST file from a successful flush so won't be kept in the DB
2024/07/17-15:01:32.271798 327757 (Original Log Time 2024/07/17-15:01:32.269954) [/memtable_list.cc:560] [default] Level-0 commit flush result of table https://github.com/facebook/rocksdb/issues/9 started
2024/07/17-15:01:32.271802 327757 (Original Log Time 2024/07/17-15:01:32.271217) [/memtable_list.cc:760] [default] Level-0 commit flush result of table https://github.com/facebook/rocksdb/issues/9: memtable https://github.com/facebook/rocksdb/issues/1 done
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12873
Test Plan:
New UT that failed before this PR with following assertion failure (i.e, duplicate WAL entries) and passes after
```
db_wal_test: db/write_batch.cc:2254: rocksdb::Status rocksdb::{anonymous}::MemTableInserter::PutCFImpl(uint32_t, const rocksdb::Slice&, const rocksdb::Slice&, rocksdb::ValueType, RebuildTxnOp, const ProtectionInfoKVOS64*) [with RebuildTxnOp = rocksdb::{anonymous}::MemTableInserter::PutCF(uint32_t, const rocksdb::Slice&, const rocksdb::Slice&)::<lambda(rocksdb::WriteBatch*, uint32_t, const rocksdb::Slice&, const rocksdb::Slice&)>; uint32_t = unsigned int; rocksdb::ProtectionInfoKVOS64 = rocksdb::ProtectionInfoKVOS<long unsigned int>]: Assertion `seq_per_batch_' failed.
```
Reviewed By: anand1976
Differential Revision: D59884468
Pulled By: hx235
fbshipit-source-id: 5d854b719092552c69727a979f269fb7f6c39756
Summary:
InitInputTableProperties() can open and do IOs and is called under mutex_. This PR removes it from FinalizeInputInfo(). It is now called in CompactionJob::Run() and BuildCompactionJobInfo() (called in NotifyOnCompactionBegin()) without holding mutex_.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12879
Test Plan: existing unit tests. Added assert in GetInputTableProperties() to ensure that input_table_properties_ is initialized whenever it's called.
Reviewed By: hx235
Differential Revision: D59933195
Pulled By: cbi42
fbshipit-source-id: c8089e13af8567fa3ab4b94d9ec384ae98ab2ec8
Summary:
... to enable use cases like using RocksDB to merge sort data for ingestion. A new file ingestion option `IngestExternalFileOptions::allow_db_generated_files` is introduced to allows users to ingest SST files generated by live DBs instead of SstFileWriter. For now this only works if the SST files being ingested have zero as their largest sequence number AND do not overlap with any data in the DB (so we can assign seqno 0 which matches the seqno of all ingested keys).
The feature is marked the option as experimental for now.
Main changes needed to enable this:
- ignore CF id mismatch during ingestion
- ignore the missing external file version table property
Rest of the change is mostly in new unit tests.
A previous attempt is in https://github.com/facebook/rocksdb/issues/5602.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12750
Test Plan: - new unit tests
Reviewed By: ajkr, jowlyzhang
Differential Revision: D58396673
Pulled By: cbi42
fbshipit-source-id: aae513afad7b1ff5d4faa48104df5f384926bf03
Summary:
This PR fixes an assertion failure in `DBImpl::ResumeImpl` - `assert(!versions_->descriptor_log_)`. In `VersionSet`, `descriptor_log_` has a pointer to the current MANIFEST writer. When there's an error updating the manifest, `descriptor_log_` is reset, and the error recovery thread checks `io_status()` in `VersionSet` and attempts to write a new MANIFEST. If another DB manipulation happens at the same time (like external file ingestion, column family manipulation etc), it calls `LogAndApply`, which also attempts to write a new MANIFEST. The assertion in `ResumeImpl` might fail in this case since the other MANIFEST writer may have updated `descriptor_log_`. To prevent the assertion, this fix updates both `io_status_` and `descriptor_log_` while holding the DB mutex.
The other option would have been to simply remove the assert. But I think its important to have it to ensure the invariant that `io_status_` is cleared if the MANIFEST is written successfully, and this fix makes things easier to reason about.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12871
Test Plan: Existing tests and crash test
Reviewed By: hx235
Differential Revision: D59926947
Pulled By: anand1976
fbshipit-source-id: af9ad18da3e29fc62c7ec2e30e0738aa33d4e5f1
Summary:
https://github.com/facebook/rocksdb/issues/12872 was a bit too gross of a fix, because we still don't need to track previous prefix in FullFilterBlockBuilder for many non-partitioned use cases. This basically narrows the fix (and potentail CPU regression) to partitioned+prefix filter cases, which are the cases that needed to be fixed.
A better efficiency fix would still be nice but not as high of a priority.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12874
Test Plan: existing tests (just added in https://github.com/facebook/rocksdb/issues/12872)
Reviewed By: jowlyzhang
Differential Revision: D59885591
Pulled By: pdillinger
fbshipit-source-id: 8f273fc3e14c4b60c8a55501dc4bbcc325cd17a1
Summary:
Basically, the fix in https://github.com/facebook/rocksdb/issues/8137 was incomplete (and I missed it in the review), because if `whole_key_filtering` is false, then `last_prefix_str_` will never be set to non-empty and the fix doesn't work. Also related to https://github.com/facebook/rocksdb/issues/5835.
This is intended as a safe, simple fix that will regress CPU efficiency slightly (for `whole_key_filtering=false` cases, because of extra prefix string copies during flush & compaction). An efficient fix is not possible without some substantial refactoring.
Also in this PR: new test DBBloomFilterTest.FilterNumEntriesCoalesce tests an adjacent code path that was previously untested for its effect of ensuring the number of unique prefixes and keys is tracked properly when both prefixes and whole keys are going into a filter. (Test fails when either of the two code segments checking for duplicates is disabled.) In addition, the same test would fail before the main bug fix here because the code would inappropriately add the empty string to the filter (because of unmodified `last_prefix_str_`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12872
Test Plan: In addition to DBBloomFilterTest.FilterNumEntriesCoalesce, extended DBBloomFilterTest.SeekForPrevWithPartitionedFilters to cover the broken case. (Mostly whitespace change.)
Reviewed By: jowlyzhang
Differential Revision: D59873793
Pulled By: pdillinger
fbshipit-source-id: 2a7b7f09ca73dc188fb4dab833826ad6da7ebb11
Summary:
**Context/Summary:**
We recently discovered a case where `GetLiveFilesStorageInfo()` failed when `Options::recycle_log_file_num` > 0. Before fixing the incompatibility, we disable these combination in stress test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12868
Test Plan: monitor CI
Reviewed By: jowlyzhang
Differential Revision: D59820802
Pulled By: hx235
fbshipit-source-id: 7b09063af6d72ae0ba187b4cf8887abd8a78e5e8
Summary:
Context/Summary: see above, though the impact is small.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12866
Test Plan: exiting UT
Reviewed By: anand1976
Differential Revision: D59782913
Pulled By: hx235
fbshipit-source-id: ec02843645cce49466bde602035d2e61c31965b8
Summary:
The failure of `WriteCurrentStateToManifest()` in `VersionSet::ProcessManifestWrites()` was not handled properly. If it failed, `manifest_io_status` was not updated, leading to `manifest_file_number_` being updated to the newly created manifest even though its bad. This would lead to the bad manifest immediately getting deleted, and also the good manifest (referenced by `CURRENT`) getting deleted by obsolete file deletion because of `manifest_file_number_` not referencing its number.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12865
Reviewed By: hx235
Differential Revision: D59782940
Pulled By: anand1976
fbshipit-source-id: f752fb9a1c23fd3d734616e273613cbac204301b
Summary:
In follow-up to https://github.com/facebook/rocksdb/issues/12852:
* Use std::copy in place of copy_n for potentially overlapping buffer
* Get rid of troublesome -1 idiom from `pos_at_last_append_` and `pos_at_last_sync_`
* Small improvements to test FaultInjectionFSTest.ReadUnsyncedData
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12861
Test Plan: CI, crash test, etc.
Reviewed By: cbi42
Differential Revision: D59757484
Pulled By: pdillinger
fbshipit-source-id: c6fbdc2e97c959983184925a855cc8b0285fa23f
Summary:
Unit tests `DBTest.ThreadStatusFlush` and `DBTestWithParam.ThreadStatusSingleCompaction` have been flaky and fail with error message
```
[ RUN ] DBTest.ThreadStatusFlush
op_count: 0, expected_count 1
thread id: 718113, thread status: , cf_name
thread id: 718114, thread status: , cf_name pikachu
/__w/rocksdb/rocksdb/db/db_test.cc:4817: Failure
Value of: VerifyOperationCount(env_, ThreadStatus::OP_FLUSH, 1)
Actual: false
Expected: true
[ FAILED ] DBTest.ThreadStatusFlush (106 ms)
[ RUN ] DBTestWithParam/DBTestWithParam.ThreadStatusSingleCompaction/0
db/db_test.cc:4673: Failure
Expected equality of these values:
op_count
Which is: 0
expected_count
Which is: 1
[ FAILED ] DBTestWithParam/DBTestWithParam.ThreadStatusSingleCompaction/0, where GetParam() = (1, false)
```
One cause for this is that before flush/compaction finishes, we will go through `~WritableFileWriter()`, either for WAL or SST file, and temporarily set thread_operation to UNKNOWN. This UNKNOWN thread operation seem to be there for some stress test verification. This PR fixes these tests by setting the IOActivity in ~WritableFileWriter() for debug build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12858
Test Plan: monitor future test failure.
Reviewed By: hx235
Differential Revision: D59691564
Pulled By: cbi42
fbshipit-source-id: 3f96998bba9d42aba50d1830c2b51bef2dd6705f
Summary:
Follow-up to https://github.com/facebook/rocksdb/issues/12729 and others to fix FaultInjectionTestFS handling the case where a live WAL is being appended to and synced while also being copied for checkpoint or backup, up to a known flushed (but not necessarily synced) prefix of the file. It was tricky to structure the code in a way that could handle a tricky race with Sync in another thread (see code comments, thanks Changyu) while maintaining good performance and test-ability.
For more context, see the call to FlushWAL() in DBImpl::GetLiveFilesStorageInfo().
Also, the unit test for https://github.com/facebook/rocksdb/issues/12729 was neutered by https://github.com/facebook/rocksdb/issues/12797, and this re-enables the functionality it is testing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12852
Test Plan:
unit test expanded/updated. Local runs of blackbox_crash_test.
The implementation is structured so that a multi-threaded unit test is not needed to cover at least the code lines, as the race handling is folded into "catch up after returning unsynced and then a sync."
Reviewed By: cbi42
Differential Revision: D59594045
Pulled By: pdillinger
fbshipit-source-id: 94667bb72255e2952586c53bae2c2dd384e85a50
Summary:
This PR fix a bug for recovering a prepared Transaction that can contain user-defined timestamps.
The `Transaction::Put` type of APIs expect the key provided to be user key without timestamps. When the original transaction added a key for a column family that enables user-defined timestamps, say of size 8. Internally `WriteBatch::Put` will leave a placeholder 8 bytes for the final commit timestamp. For example:
https://github.com/facebook/rocksdb/blob/cec28aa90f0e38666c0b3485d197ecbe0c2a025f/db/write_batch.cc#L937
When rebuilding this transaction from a `WriteBatch` from WAL log, we should consider this and remove the tailing 8 bytes of a key before adding it via the public Transaction write APIs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12856
Test Plan: Added unit test that would fail without this fix
Reviewed By: cbi42
Differential Revision: D59656399
Pulled By: jowlyzhang
fbshipit-source-id: c716aefa4d548770b691efe96ac8e6d7dab458b9
Summary:
fix SetOptions() so that max_read_amp is at least level0_file_num_compaction_trigger.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12854
Test Plan: monitor stress test new failure
Reviewed By: hx235
Differential Revision: D59618547
Pulled By: cbi42
fbshipit-source-id: b83371f293b87097ee9cdd32d662e9965cde57e6
Summary:
https://github.com/facebook/rocksdb/issues/12746 added calls to FlushWAL/SyncWAL in db_stress during reopen, in order to ensure persistence of unpersisted data and avoid false alarms due to lack of prefix recovery support in db_stress reopen. However, there's no need to flush/sync the WAL if avoid_flush_during_shutdown is false, as the WAL will not be needed during recovery. This allows file systems that don't support SyncWAL (not thread safe) to avoid the need by requesting flush during shutdown.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12853
Reviewed By: hx235
Differential Revision: D59604138
Pulled By: anand1976
fbshipit-source-id: 4c4470b3c956d6bf64f5b8a1a5727a8b888f1a5f
Summary:
`MultiOpsTxnsStressListener::OnCompactionCompleted()` access `db_` and can be called while db_ is being destroyed in ~StressTest(). This causes TSAN to complain about data race. This PR fixes this issue by calling db_->Close() first to stop all background work. Also moved the cleanup out of StressTest destructor to avoid race between the listener and ~StressTest().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12847
Test Plan: monitor crash test failure.
Reviewed By: hx235
Differential Revision: D59492691
Pulled By: cbi42
fbshipit-source-id: afcbab084cc9ac0904d6b04809b0888498ca8e66
Summary:
**Context/Summary:**
The assertion `tlist.find(tdn.second) == tlist.end()` https://github.com/facebook/rocksdb/blame/9eebaf11cbd875435b572f05f0378ecdb761cc74/utilities/fault_injection_fs.cc#L1003 can catch us false positive.
Some context
(1) When fault injection is enabled and db open fails because of that, crash test will retry open without injected error in order to proceed with a clean open:
https://github.com/facebook/rocksdb/blob/9eebaf11cbd875435b572f05f0378ecdb761cc74/db_stress_tool/db_stress_test_base.cc#L3559https://github.com/facebook/rocksdb/blob/9eebaf11cbd875435b572f05f0378ecdb761cc74/db_stress_tool/db_stress_test_base.cc#L3586-L3639
(2)
a. `FaultInjectionTestFS::dir_to_new_files_since_last_sync` records files that are created but not yet synced.
b. When we create CURRENT, we will first create a temp file and rename it as "CURRENT". As part of the renaming, we will [assert](https://github.com/facebook/rocksdb/blame/9eebaf11cbd875435b572f05f0378ecdb761cc74/utilities/fault_injection_fs.cc#L1003) `FaultInjectionTestFS::dir_to_new_files_since_last_sync ` doesn't already have a file named `CURRENT`.
Suppose the following sequence of events happened:
(1) 1st open, with metadata write error
1. As part of creating CURRENT file, added "CURRENT" to `FaultInjectionTestFS::dir_to_new_files_since_last_sync_`
https://github.com/facebook/rocksdb/blob/9eebaf11cbd875435b572f05f0378ecdb761cc74/utilities/fault_injection_fs.cc#L735
2. `SyncDir()` here https://github.com/facebook/rocksdb/blob/9eebaf11cbd875435b572f05f0378ecdb761cc74/file/filename.cc#L412 failed with injected metadata write error. Therefore, "CURRENT" file didn't get removed from `FaultInjectionTestFS::dir_to_new_files_since_last_sync_` as it would if `SyncDir()` succeeded https://github.com/facebook/rocksdb/blob/9eebaf11cbd875435b572f05f0378ecdb761cc74/utilities/fault_injection_fs.h#L344
(2) 2st open
1. Attempted to create a CURRENT file and failed during renaming since `FaultInjectionTestFS::dir_to_new_files_since_last_sync_` already had a file called CURRENT. So will fail
```
assertion failed - tlist.find(tdn.second) == tlist.end()
```
This PR fixed this by removing the assertion. It used to catch us some missing sync of some directory (e.,g https://github.com/facebook/rocksdb/pull/10573) so we will keep thinking about a better way to catch that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12828
Test Plan:
Command constantly failed before the fix but passed after the PR running for 10 minutes
```
python3 tools/db_crashtest.py --simple blackbox --interval=10 --WAL_size_limit_MB=1 --WAL_ttl_seconds=60 --acquire_snapshot_one_in=100 --adaptive_readahead=1 --adm_policy=2 --advise_random_on_open=1 --allow_concurrent_memtable_write=1 --allow_data_in_errors=True --allow_fallocate=1 --async_io=0 --auto_readahead_size=1 --avoid_flush_during_recovery=0 --avoid_flush_during_shutdown=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=0 --bgerror_resume_retry_interval=100 --block_align=0 --block_protection_bytes_per_key=8 --block_size=16384 --bloom_before_level=1 --bloom_bits=10 --bottommost_compression_type=lz4hc --bottommost_file_compaction_delay=86400 --bytes_per_sync=0 --cache_index_and_filter_blocks=1 --cache_index_and_filter_blocks_with_high_priority=0 --cache_size=8388608 --cache_type=tiered_auto_hyper_clock_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=0 --charge_filter_construction=0 --charge_table_reader=0 --check_multiget_consistency=0 --check_multiget_entity_consistency=0 --checkpoint_one_in=10000 --checksum_type=kCRC32c --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=1000 --compact_range_one_in=1000000 --compaction_pri=3 --compaction_readahead_size=0 --compaction_ttl=1 --compress_format_version=1 --compressed_secondary_cache_ratio=0.5 --compressed_secondary_cache_size=0 --compression_checksum=0 --compression_max_dict_buffer_bytes=15 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=65536 --continuous_verification_interval=0 --daily_offpeak_time_utc= --data_block_index_type=1 --db_write_buffer_size=0 --default_temperature=kHot --default_write_temperature=kUnknown --delete_obsolete_files_period_micros=30000000 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=1 --disable_file_deletions_one_in=10000 --disable_manual_compaction_one_in=10000 --disable_wal=0 --dump_malloc_stats=0 --enable_checksum_handoff=1 --enable_compaction_filter=0 --enable_custom_split_merge=0 --enable_do_not_compress_roles=0 --enable_index_compression=1 --enable_memtable_insert_with_hint_prefix_extractor=0 --enable_pipelined_write=0 --enable_sst_partitioner_factory=1 --enable_thread_tracking=1 --enable_write_thread_adaptive_yield=0 --error_recovery_with_no_fault_injection=1 --exclude_wal_from_write_fault_injection=1 --fail_if_options_file_error=1 --fifo_allow_compaction=0 --file_checksum_impl=crc32c --fill_cache=1 --flush_one_in=1000000 --format_version=3 --get_all_column_family_metadata_one_in=1000000 --get_current_wal_file_one_in=0 --get_live_files_apis_one_in=1000000 --get_properties_of_all_tables_one_in=100000 --get_property_one_in=100000 --get_sorted_wal_files_one_in=0 --hard_pending_compaction_bytes_limit=2097152 --high_pri_pool_ratio=0 --index_block_restart_interval=2 --index_shortening=0 --index_type=2 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --inplace_update_support=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --key_may_exist_one_in=100000 --last_level_temperature=kWarm --level_compaction_dynamic_level_bytes=0 --lock_wal_one_in=10000 --log_file_time_to_roll=60 --log_readahead_size=16777216 --long_running_snapshots=1 --low_pri_pool_ratio=0.5 --lowest_used_cache_tier=1 --manifest_preallocation_size=0 --manual_wal_flush_one_in=0 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=16384 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=1000000 --max_key_len=3 --max_log_file_size=0 --max_manifest_file_size=1073741824 --max_sequential_skip_in_iterations=1 --max_total_wal_size=0 --max_write_batch_group_size_bytes=16 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=2097152 --memtable_insert_hint_per_batch=0 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0.1 --memtable_protection_bytes_per_key=8 --memtable_whole_key_filtering=0 --memtablerep=skip_list --metadata_charge_policy=1 --metadata_read_fault_one_in=32 --metadata_write_fault_one_in=0 --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=1 --open_files=-1 --open_metadata_read_fault_one_in=0 --open_metadata_write_fault_one_in=8 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_hits=0 --optimize_filters_for_memory=0 --optimize_multiget_for_io=1 --paranoid_file_checks=1 --partition_filters=1 --partition_pinning=3 --pause_background_one_in=1000000 --periodic_compaction_seconds=1000 --prefix_size=5 --prefixpercent=5 --prepopulate_block_cache=1 --preserve_internal_time_seconds=0 --progress_reports=0 --promote_l0_one_in=0 --read_amp_bytes_per_bit=32 --read_fault_one_in=0 --readahead_size=524288 --readpercent=45 --recycle_log_file_num=0 --reopen=0 --report_bg_io_stats=0 --reset_stats_one_in=1000000 --sample_for_compression=0 --secondary_cache_fault_one_in=32 --secondary_cache_uri= --set_options_one_in=0 --skip_stats_update_on_db_open=0 --snapshot_hold_ops=100000 --soft_pending_compaction_bytes_limit=68719476736 --sqfc_name=foo --sqfc_version=1 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=10 --stats_history_buffer_size=1048576 --strict_bytes_per_sync=1 --subcompactions=2 --sync=0 --sync_fault_injection=1 --table_cache_numshardbits=6 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=2 --uncache_aggressiveness=1582 --universal_max_read_amp=4 --unpartitioned_pinning=0 --use_adaptive_mutex=0 --use_adaptive_mutex_lru=1 --use_attribute_group=1 --use_delta_encoding=0 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=0 --use_multi_cf_iterator=1 --use_multi_get_entity=1 --use_multiget=0 --use_put_entity_one_in=1 --use_sqfc_for_range_queries=1 --use_timed_put_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000 --verify_compression=1 --verify_db_one_in=10000 --verify_file_checksums_one_in=1000 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=none --write_buffer_size=33554432 --write_dbid_to_manifest=1 --write_fault_one_in=8 --writepercent=35
```
Reviewed By: cbi42
Differential Revision: D59241548
Pulled By: hx235
fbshipit-source-id: 5bb49e6a94943273f47578a2caf3d08ca5b67e5f
Summary:
Create C API function for iterating over WriteBatch for custom Column Families
Adding function to C API that exposes column family specific methods to iterate over WriteBatch: put_cf, delete_cf and merge_cf. This is required when the one needs to read changes for any non-default column family. Without that functionality it is impossible to iterate over changes in WAL that are relevant to custom column families.
Fixes https://github.com/facebook/rocksdb/issues/12790
Testing:
Added WriteBatch iteration test to "columnfamilies" section of C API unit tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12718
Reviewed By: cbi42
Differential Revision: D59483601
Pulled By: ajkr
fbshipit-source-id: b68b900636304528a38620a8c3ad82fdce4b60cb
Summary:
Based on https://github.com/microsoft/STL/issues/369
They fixed the issue in `std::condition_variable_any` but not in `std::condition_variable`, which is currently used in rocksdb repo. So we need to implement the work around regardless of `_MSVC_STL_UPDATE`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12815
Reviewed By: cbi42
Differential Revision: D59493690
Pulled By: ajkr
fbshipit-source-id: ad0fc9ef9f2357347d21e271c2f1d0a3a97d89be
Summary:
The default value for `refillPeriodMicros` is `100 * 1000`, which means 100ms (or 100,000us).
The document comments say 100,000ms (equivalent to 100 seconds), which is incorrect and misleading. This PR fixes this typo.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12832
Reviewed By: cbi42
Differential Revision: D59492336
Pulled By: ajkr
fbshipit-source-id: c2f55a8b996fe078a1510fcbebaea92ec0075929
Summary:
### Summary: Round-Robin pri under leveled compaction allows subcompactions by default is not compatible with PlainTable
```c++
bool Compaction::ShouldFormSubcompactions() const {
if (cfd_ == nullptr) {
return false;
}
// Round-Robin pri under leveled compaction allows subcompactions by default
// and the number of subcompactions can be larger than max_subcompactions_
if (cfd_->ioptions()->compaction_pri == kRoundRobin &&
cfd_->ioptions()->compaction_style == kCompactionStyleLevel) {
return output_level_ > 0;
}
if (max_subcompactions_ <= 1) {
return false;
}
```
PlainTable does not support Subcompaction, including when AdaptiveTable is applied to PlainTable. subcompaction by default will result in the following error in some scenarios.
```c++
void PlainTableIterator::Seek(const Slice& target) {
if (use_prefix_seek_ != !table_->IsTotalOrderMode()) {
// This check is done here instead of NewIterator() to permit creating an
// iterator with total_order_seek = true even if we won't be able to Seek()
// it. This is needed for compaction: it creates iterator with
// total_order_seek = true but usually never does Seek() on it,
// only SeekToFirst().
status_ = Status::InvalidArgument(
"total_order_seek not implemented for PlainTable.");
offset_ = next_offset_ = table_->file_info_.data_end_offset;
return;
}
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12843
Reviewed By: ajkr
Differential Revision: D59433477
Pulled By: cbi42
fbshipit-source-id: fb780ba7f7e8efdfedb7480abf14dd38e0b63677
Summary:
We are seeing a number of crash test failures coming from checkpoint and backup code, likely from WalManager::GetSortedWalFiles -> ... -> WalManager::ReadFirstLine and this code path is not needed, because we don't need to know the sequence numbers of WAL files going into a checkpoint or backup. We can minimize the impact of whatever inconsistency is causing that problem by not relying on it where it's not needed.
Similarly, when we only need a roughly accurate set of current WAL files, we don't need to query all the archived WAL files (and redundantly the live ones again).
So this reduces filesystem queries and DB mutex acquires in creating backups and checkpoints.
Needed follow-up:
Figure out what is causing various failures with an apparent inconsistency where GetSortedWalFiles fails on reading a WAL file. If it's an injected failure, perhaps it's not propagating that injected failure appropriately. It might also be an inconsistency between what the DB knows is flushed and what WalManager reads from the filesystem (which we know is dubious and should be phased out, which this is arguably another step toward). Or completing that phase-out might solve the problem without a full diagnosis.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12831
Test Plan:
existing tests (easily caught when I went too far in initally developing this change)
Update to BackupUsingDirectIO test so that there's a WAL file in what is backed up. (Was relying on some oddity.)
Reviewed By: cbi42
Differential Revision: D59252649
Pulled By: pdillinger
fbshipit-source-id: 7ad4187a1c70caa59a6d6c1c643ef95232b929f5
Summary:
**Context/Summary** : as titled as seen_injected_error_ is a subcategory of seen_error_
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12830
Test Plan: existing CI as it only affects crash test code
Reviewed By: jaykorean
Differential Revision: D59249018
Pulled By: hx235
fbshipit-source-id: 20e4c22cade57e12a104a03999e4c841a3648b11
Summary:
We didn't implement file system prefetch for OS Win. During table open, it uses `FilePrefetchBuffer` instead and only do 1 read instead of 4 in BufferedIO.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12816
Reviewed By: jaykorean
Differential Revision: D59181835
Pulled By: ajkr
fbshipit-source-id: 18b8f0247408cd1a80f289357ede5232ae5a3c66
Summary:
To fix errors like "Verification failed: SetOptions failed: Invalid argument: max_successive_merges > 0 is incompatible with unordered_write".
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12827
Test Plan: no new crash test failure due to this option combination.
Reviewed By: hx235
Differential Revision: D59233002
Pulled By: cbi42
fbshipit-source-id: 2a3e4d57a56f07bdda49ea36f0f9f6a30f17bbc3
Summary:
**Context/Summary:**
See titled; along with one more minor fix to other disabling
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12825
Test Plan: CI won't show `Failed to get DB property: rocksdb.aggregated-table-properties`
Reviewed By: jaykorean
Differential Revision: D59231819
Pulled By: hx235
fbshipit-source-id: a8e73c9e06eeceb4c6025a4885823a3eba25c359
Summary:
As titled. Added some documentations for some `Env` interfaces and removed some obsolete doc for `Options.env`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12813
Reviewed By: ajkr
Differential Revision: D59119632
Pulled By: jowlyzhang
fbshipit-source-id: 114b13f0f843cde6ebc0746156b80c94ea2ce143
Summary:
**Context/Summary:**
It seems unreasonable to take the archived log size into account when calculating log size **for flush** in method CreateCheckpoint. If the user sets WAL_ttl_seconds or WAL_size_limit_MB, the argument _log_size_for_flush_ can easily be reached due to the size of the archived dir. As a result, the flush may always be triggered.
**Test**
corverd by ./checkpoint_test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12680
Reviewed By: jaykorean
Differential Revision: D59097904
Pulled By: ajkr
fbshipit-source-id: 0ed29c1b078d8f40b85288541b008e00dbc517d3
Summary:
the return value for `ErrorHandler::SetBGError(error)` seems to be not well-defined, it can be `bg_error_` (no matter if the `bg_error_` is set to the input error), ok status or [`recovery_error_`](https://github.com/facebook/rocksdb/blob/3ee4d5a11a882056b341a9a1694a71371a39f664/db/error_handler.cc#L669) from `StartRecoverFromRetryableBGIOError()`. The `recovery_error_` returned may be an OK status.
We have only a few places that use the return value of `SetBGError()` and they don't need to do so. Using the return value may even be wrong for example in https://github.com/facebook/rocksdb/blob/3ee4d5a11a882056b341a9a1694a71371a39f664/db/db_impl/db_impl_write.cc#L2365 where a non-ok `s` could be overwritten to OK. This PR changes SetBGError() to return void and clean up relevant code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12792
Test Plan: existing unit tests and go over all places where return value of `SetBGError()` is used.
Reviewed By: hx235
Differential Revision: D58904898
Pulled By: cbi42
fbshipit-source-id: d58a20ba5a40e3f35367c6034a32c755088c3653
Summary:
**Context/Summary:**
After injecting write error to WAL, we started to see crash recovery verification failure in prefix recovery. That's because the current tracing implementation traces every write before it writes to WAL even when the WAL write can fail with write error injection. One consequence of that is the traced writes in trace files does not corresponding to write sequence sequence anymore e.g, it has more traced writes that the actual assigned sequence number to successful writes. Therefore https://github.com/facebook/rocksdb/blob/b4a84efb4e842b782e976de5b22a4554c2f76edd/db_stress_tool/expected_state.cc#L674 won't restore the ExpectedState to the correct sequence number we want.
Ideally, we should have a prepare-commit mechanism for tracing just like our ExpectedState so we can ignore the traced write if the write fails later. But for now, to simplify, we simply don't inject WAL error (and metadata write error cuz it could fail write when sync WAL dir fails)
To do so, we need to be able to exclude WAL from write injection but still allow sync fault injection in it to maintain its original sync fault testing coverage. This prompts us to decouple sync fault and write injection in FaultInjectionTestFS. And this is what this PR mainly about.
So now `FaultInjectionTestFS` works as the following:
- If direct_writable is true, then `FaultInjectionTestFS` is bypassed for writable file
- Otherwise, FaultInjectionTestFS` can buffer data for sync fault injection (if inject_unsynced_data_loss_ == true, global settings) and/or inject write error (if MaybeInjectThreadLocalError(), thread-local settings). WAL file can be optionally excluded from write injection
Bonus: better naming of relevant variables
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12797
Test Plan:
- The follow commands failed before this fix but passes after
```
python3 tools/db_crashtest.py --simple blackbox \
--interval=5 \
--preserve_unverified_changes=1 \
--threads=32 \
--disable_auto_compactions=1 \
--WAL_size_limit_MB=0 --WAL_ttl_seconds=0 --acquire_snapshot_one_in=0 --adaptive_readahead=0 --adm_policy=0 --advise_random_on_open=1 --allow_concurrent_memtable_write=0 --allow_data_in_errors=True --allow_fallocate=1 --async_io=0 --auto_readahead_size=0 --avoid_flush_during_recovery=1 --avoid_flush_during_shutdown=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --bgerror_resume_retry_interval=1000000 --block_align=0 --block_protection_bytes_per_key=4 --block_size=16384 --bloom_before_level=2147483646 --bloom_bits=3.2003682301518492 --bottommost_compression_type=zlib --bottommost_file_compaction_delay=600 --bytes_per_sync=0 --cache_index_and_filter_blocks=1 --cache_index_and_filter_blocks_with_high_priority=1 --cache_size=33554432 --cache_type=fixed_hyper_clock_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=0 --charge_filter_construction=0 --charge_table_reader=1 --check_multiget_consistency=0 --check_multiget_entity_consistency=0 --checkpoint_one_in=0 --checksum_type=kxxHash64 --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=2 --compaction_readahead_size=0 --compaction_ttl=0 --compress_format_version=1 --compressed_secondary_cache_size=16777216 --compression_checksum=1 --compression_max_dict_buffer_bytes=549755813887 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=none --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --daily_offpeak_time_utc=00:00-23:59 --data_block_index_type=0 \
--db_write_buffer_size=0 --delete_obsolete_files_period_micros=0 --delpercent=0 --delrangepercent=0 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_file_deletions_one_in=0 --disable_manual_compaction_one_in=0 --disable_wal=0 --dump_malloc_stats=0 --enable_checksum_handoff=0 --enable_compaction_filter=0 --enable_custom_split_merge=0 --enable_do_not_compress_roles=1 --enable_index_compression=0 --enable_memtable_insert_with_hint_prefix_extractor=0 --enable_pipelined_write=0 --enable_sst_partitioner_factory=0 --enable_thread_tracking=0 --enable_write_thread_adaptive_yield=0 --error_recovery_with_no_fault_injection=0 --fail_if_options_file_error=0 --fifo_allow_compaction=1 --file_checksum_impl=xxh64 --fill_cache=0 --flush_one_in=100 --format_version=4 --get_all_column_family_metadata_one_in=0 --get_current_wal_file_one_in=0 --get_live_files_apis_one_in=0 --get_properties_of_all_tables_one_in=0 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --hard_pending_compaction_bytes_limit=274877906944 --high_pri_pool_ratio=0.5 --index_block_restart_interval=9 --index_shortening=1 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=0 --inplace_update_support=0 --iterpercent=0 --key_len_percent_dist=1,30,69 --key_may_exist_one_in=0 --last_level_temperature=kUnknown --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=0 --log2_keys_per_lock=10 --log_file_time_to_roll=0 --log_readahead_size=16777216 --long_running_snapshots=0 --low_pri_pool_ratio=0 --lowest_used_cache_tier=2 --manifest_preallocation_size=0 --manual_wal_flush_one_in=0 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=524288 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=1000 --max_key_len=3 --memtable_insert_hint_per_batch=0 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0.5 --memtable_protection_bytes_per_key=8 --memtable_whole_key_filtering=0 --memtablerep=skip_list --metadata_charge_policy=0 --metadata_read_fault_one_in=0 --metadata_write_fault_one_in=0 --min_write_buffer_number_to_merge=1 --mmap_read=0 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_read_fault_one_in=0 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=20000000 \
--optimize_filters_for_hits=1 --optimize_filters_for_memory=1 --optimize_multiget_for_io=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=0 --periodic_compaction_seconds=0 --prefix_size=1 --prefixpercent=0 --prepopulate_block_cache=0 --preserve_internal_time_seconds=0 --progress_reports=0 --promote_l0_one_in=0 --read_amp_bytes_per_bit=0 --read_fault_one_in=0 --readahead_size=0 --readpercent=0 --recycle_log_file_num=0 --reopen=0 --report_bg_io_stats=0 --reset_stats_one_in=1000000 --sample_for_compression=5 --secondary_cache_fault_one_in=0 --secondary_cache_uri= --skip_stats_update_on_db_open=0 --snapshot_hold_ops=100000 --soft_pending_compaction_bytes_limit=68719476736 --sqfc_name=bar --sqfc_version=1 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=10 --stats_history_buffer_size=0 --strict_bytes_per_sync=0 --subcompactions=1 --sync=0 --sync_fault_injection=1 --table_cache_numshardbits=0 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=3 --uncache_aggressiveness=9890 --universal_max_read_amp=-1 --unpartitioned_pinning=3 --use_adaptive_mutex=0 --use_adaptive_mutex_lru=1 --use_attribute_group=0 --use_delta_encoding=0 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=0 --use_multi_cf_iterator=0 --use_multi_get_entity=0 --use_multiget=0 --use_put_entity_one_in=0 --use_sqfc_for_range_queries=0 --use_timed_put_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=0 --verify_checksum_one_in=0 --verify_compression=1 --verify_db_one_in=0 --verify_file_checksums_one_in=0 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=zstd --write_buffer_size=335544320 --write_dbid_to_manifest=1 --write_fault_one_in=100 --writepercent=100
```
- CI
Reviewed By: cbi42
Differential Revision: D58917145
Pulled By: hx235
fbshipit-source-id: b6397036bea035a92341c2b05fb01872db2153d7
Summary:
**Context/Summary:**
https://github.com/facebook/rocksdb/pull/12713 adjusted the error injection in ReadAsync. See original behavior here https://github.com/facebook/rocksdb/blob/71f9e6b5b36e3223e8dba29df75e4e5008818d16/utilities/fault_injection_fs.cc#L456-L484
The PR returns the injected error instead of the ReadAsync() status. It also allows cb to be call in `TestFSRandomAccessFile` layer when ReadAsync() and the cb can called within `FSRandomAccessFile` layer so cb can be double called. It appears to be the root-cause of the following frequent error`AddressSanitizer: heap-use-after-free on rocksdb::RandomAccessFileReader::ReadAsync` though I don't have a confirmed repro yet. Considering this change to mostly revert to previous behavior, it should be safe to proceed anyway.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12811
Test Plan: Monitor CI
Reviewed By: jaykorean
Differential Revision: D59067927
Pulled By: hx235
fbshipit-source-id: 8645e5a52d44b7ed2186438f885b4ea13f10b59d
Summary:
**Context/Summary:**
Print more info for debugging a TestCheckpoint error; further disable backup/restore error injection as it has not been stabilized with our new thread-local error injection. Will need to enable it separately later.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12812
Test Plan: CI
Reviewed By: jaykorean
Differential Revision: D59072678
Pulled By: hx235
fbshipit-source-id: 9481ccf62db952288e7f47ee4b68a34ad0651d5c
Summary:
I'd like to get this in so the Rust folks can integrate with their splendid logging/tracing frameworks; will be hugely appreciated. 🙏🏻
The infolog capabilities for C embeddings are quite spartan. LOG files were generated involuntarily until redirection to stderr was added by https://github.com/facebook/rocksdb/issues/12262; still insufficient for apps which cannot tolerate pollution of their stdio and tend to have existing logging frameworks to tie into for that.
Adds a very minimal derive of Logger around a C callback, written in the spirit, useful for FFI interfaces from other languages to integrate infolog.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12537
Reviewed By: ajkr
Differential Revision: D57597766
Pulled By: cbi42
fbshipit-source-id: ec684ce4ddf77a0a6ebbf013a1bacb4ff2e49eb0
Summary:
`-Wextra-semi` or `-Wextra-semi-stmt`
If the code compiles, this is safe to land.
Reviewed By: dmm-fb
Differential Revision: D59007259
fbshipit-source-id: ee0e01e1cc14ebe183d3b74153ef77f11625d983
Summary:
**Context/Summary:** It makes more sense to mark error injection during creation as read file as "kread" so we don't get confusing msg like below
```
stderr:
error : Get() returns IO error: injected metadata write error for key: 000000000000004F000000000000012B00000000000000EF.
Verification failed :(
```
Also an early return here https://github.com/facebook/rocksdb/blob/e0ddbee76fdc55b1e9f449b6e430b76291268786/db_stress_tool/db_stress_test_base.cc#L2871 can lead to unreleased snapshot upon DB restart `Non-ok close status: Operation aborted: Cannot close DB with unreleased snapshot`. This PR fixed it too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12810
Test Plan: CI
Reviewed By: jowlyzhang
Differential Revision: D59022154
Pulled By: hx235
fbshipit-source-id: 18c489d4692e2eb4fb32937967f57c8a81010cc3
Summary:
Context/Summary: as titled, since injected error log isn't that useful for debugging and takes up a lot of console printing space
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12807
Test Plan: CI
Reviewed By: pdillinger, jowlyzhang
Differential Revision: D58969796
Pulled By: hx235
fbshipit-source-id: 1663fb0779d7a049fc3b101ddefd263be7bdd4b5
Summary:
**Context/Summary:**
There are a couple places where we forgot to check fault_fs_guard before accessing it. So we can see something like this occasionally
```
=138831==Hint: address points to the zero page.
SCARINESS: 10 (null-deref)
AddressSanitizer:DEADLYSIGNAL
#0 0x18b9e0b in rocksdb::ThreadLocalPtr::Get() const fbcode/internal_repo_rocksdb/repo/util/thread_local.cc:503
https://github.com/facebook/rocksdb/issues/1 0x83d8b7 in rocksdb::StressTest::TestCompactRange(rocksdb::ThreadState*, long, rocksdb::Slice const&, rocksdb::ColumnFamilyHandle*) fbcode/internal_repo_rocksdb/repo/utilities/fault_injection_fs.h
```
Also accessing of `io_activties_exempted_from_fault_injection.find` not fully synced so we see the following
```
WARNING: ThreadSanitizer: data race (pid=90939)
Write of size 8 at 0x7b4c000004d0 by thread T762 (mutexes: write M0):
#0 std::_Rb_tree<rocksdb::Env::IOActivity, rocksdb::Env::IOActivity, std::_Identity<rocksdb::Env::IOActivity>, std::less<rocksdb::Env::IOActivity>, std::allocator<rocksdb::Env::IOActivity>>::operator=(std::_Rb_tree<rocksdb::Env::IOActivity, rocksdb::Env::IOActivity, std::_Identity<rocksdb::Env::IOActivity>, std::less<rocksdb::Env::IOActivity>, std::allocator<rocksdb::Env::IOActivity>> const&) fbcode/third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/stl_tree.h:208 (db_stress+0x411c32) (BuildId: b803e5aca22c6b080defed8e85b7bfec)
https://github.com/facebook/rocksdb/issues/1 rocksdb::DbStressListener::OnErrorRecoveryCompleted(rocksdb::Status) fbcode/third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/stl_set.h:298 (db_stress+0x4112e5) (BuildId: b803e5aca22c6b080defed8e85b7bfec)
https://github.com/facebook/rocksdb/issues/2 rocksdb::EventHelpers::NotifyOnErrorRecoveryEnd(std::vector<std::shared_ptr<rocksdb::EventListener>, std::allocator<std::shared_ptr<rocksdb::EventListener>>> const&, rocksdb::Status const&, rocksdb::Status const&, rocksdb::InstrumentedMutex*) fbcode/internal_repo_rocksdb/repo/db/event_helpers.cc:239 (db_stress+0xa09d60) (BuildId: b803e5aca22c6b080defed8e85b7bfec)
Previous read of size 8 at 0x7b4c000004d0 by thread T131 (mutexes: write M1):
#0 rocksdb::FaultInjectionTestFS::MaybeInjectThreadLocalError(rocksdb::FaultInjectionIOType, rocksdb::IOOptions const&, rocksdb::FaultInjectionTestFS::ErrorOperation, rocksdb::Slice*, bool, char*, bool, bool*) fbcode/third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/stl_tree.h:798 (db_stress+0xf7d0f3) (BuildId: b803e5aca22c6b080defed8e85b7bfec)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12799
Test Plan: CI
Reviewed By: jowlyzhang
Differential Revision: D58917449
Pulled By: hx235
fbshipit-source-id: f24fc1acc2a7d91f9f285447a97ba41397f48dbd
Summary:
Fix a race for accessing `bg_error_` after mutex is released. We make some copies before releasing to avoid this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12803
Reviewed By: cbi42
Differential Revision: D58957557
Pulled By: jowlyzhang
fbshipit-source-id: 3c7369a3b8c8707aebc0044ff98288c898c05cb8
Summary:
LLVM has detected a violation of `-Wdeprecated-dynamic-exception-spec`. Dynamic exceptions were removed in C++17. This diff fixes the deprecated instance(s).
See [Dynamic exception specification](https://en.cppreference.com/w/cpp/language/except_spec) and [noexcept specifier](https://en.cppreference.com/w/cpp/language/noexcept_spec).
Reviewed By: dmm-fb
Differential Revision: D58953050
fbshipit-source-id: 8559dc925ea5ed0a6dbf938aa02ee810f01047ae
Summary:
**Context/Summary:**
`injected_error_count` is needed to verify read error injection. For example, when injected_error_count == 0, the read call should not return error. https://github.com/facebook/rocksdb/commit/981fd432fa2441fc10a59a462bd14906ccb1c0e0 only calculated `injected_error_count` under `SharedState::ignore_read_error=false` so `injected_error_count==0` when `SharedState::ignore_read_error=true`. However we can still inject read error in critical read path under `SharedState::ignore_read_error=true` so the read call is expected to return injected error. This contradicts to the `injected_error_count == 0` as we skipped its calculation. As a consequence, we see
```
TestPrefixScan error: IO error: injected read error;
Verification failed
```
in code paths
```
if (s.ok()) {
thread->stats.AddPrefixes(1, count);
} else if (injected_error_count > 0 && IsRetryableInjectedError(s)) {
fprintf(stdout, "TestPrefixScan error: %s\n", s.ToString().c_str());
} else {
fprintf(stderr, "TestPrefixScan error: %s\n", s.ToString().c_str());
thread->shared->SetVerificationFailure();
}
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12800
Test Plan: CI
Reviewed By: cbi42
Differential Revision: D58918014
Pulled By: hx235
fbshipit-source-id: d73139c114fb3f61003dedca116f7ec36309eca4
Summary:
**Context/Summary:**
The relevant code logs info of newly created WAL and proceeds to "ConstructFragmentedRangeTombstones()" even when the previous step fails. This PR fixes it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12798
Test Plan: Existing tests
Reviewed By: cbi42
Differential Revision: D58917246
Pulled By: hx235
fbshipit-source-id: f395210d91e50617195cb9a8047cf5d82db0c40e
Summary:
- Updated pinned folly version to the latest
- gcc/g++ 10 is required since https://github.com/facebook/folly/commit/2c1c617e9e so we had to modify the tests using gcc/g++ 7
- libsodium 1.0.17 is no longer downloadable from GitHub so I found it elsewhere. I will submit a PR for that upstream to folly
- USE_FOLLY_LITE changes
- added boost header dependency instead of commenting out the `#include`s since that approach stopped working
- added "folly/lang/Exception.cpp" to the compilation
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12795
Reviewed By: hx235
Differential Revision: D58916693
Pulled By: ajkr
fbshipit-source-id: b5f9bca2d929825846ac898b785972b071db62b1
Summary:
the assertion `assert(!IsFragmentedRangeTombstonesConstructed(false));` assumes ConstructFragmentedRangeTombstones() is called only once for a memtable. This is not true since SwitchMemtable() can be called multiple times on the same live memtable, if a previous attempt fails. So remove the assertion in this PR and simplify relevant code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12796
Test Plan: the exact condition to trigger manifest write in SwitchMemtable() is complicated. Will monitor crash test to see if there's no more failure.
Reviewed By: hx235
Differential Revision: D58913310
Pulled By: cbi42
fbshipit-source-id: 458bb9eebcf6743e9001186fcb757e4b50e8a5d2
Summary:
**Context/Summary:**
https://github.com/facebook/rocksdb/pull/12713 accidentally removed the mechanism of ignoring injected read error on non-critical read path such as read from filter. IO failure in read from filter should not fail the read as we can always read from the actual file. Therefore error injection in filter read path does not need to lead to failure in Get() and crash test should allow that. Otherwise, we will get crash test error "Didn't get expected error from..."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12793
Test Plan: CI
Reviewed By: cbi42
Differential Revision: D58895393
Pulled By: hx235
fbshipit-source-id: 5b605d8446e0b8d4149cdbe6f4be3c7534d4acfa
Summary:
**Context/Summary:**
https://github.com/facebook/rocksdb/pull/12713 accidentally turned on fault injection in BatchedOpsStressTest and MultiOpsTxnsStressTest. Though this was meant to be an increased testing coverage, it also made our CI noisy. For now we decided to disable it before we manage to stabilize the CI and fix bugs surfaced in NonBatchedOpsStressTest which impacts more users.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12794
Test Plan: CI
Reviewed By: cbi42
Differential Revision: D58897598
Pulled By: hx235
fbshipit-source-id: 8094072ef1bff27d7825efed0876f365a31fef9c
Summary:
I believe this was possible with recyclable logs before recent work like https://github.com/facebook/rocksdb/issues/12734, but this cleans up a couple of possible crashes revealed by the crash test. A WAL with a nullptr file writer (already closed) can persist in `logs_` if a later WAL fails to sync. In case of any WAL sync failures, we don't record WAL syncs to the manifest. Thus, even if a WAL is fully synced and closed, we might need to keep it on the `logs_` list so that we know to record its sync to the manifest if there should be a successful sync next time. (However, I believe that's future-looking because currently any failure in WAL sync is considered non-recoverable.)
I don't believe this was likely enough before recent changes to warrant a release note (if it was possible).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12789
Test Plan: A unit test that would reveal the crashes, now fixed
Reviewed By: cbi42
Differential Revision: D58874154
Pulled By: pdillinger
fbshipit-source-id: bc69407cd9cbcd080af9585d502d4e33dafc3d29
Summary:
a pre-existing flaw revealed by crash test with uncache behavior. Easy fix.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12782
Test Plan: Modified unit test PrefetchTest.Basic (fails without fix)
Reviewed By: hx235
Differential Revision: D58757916
Pulled By: pdillinger
fbshipit-source-id: 23c0240c7cf0cb0b69a372f9531c07af920e09da
Summary:
**Context:**
We currently have partial error injection:
- DB operation: all read, SST write
- DB open: all read, SST write, all metadata write.
This PR completes the error injection (with some limitations below):
- DB operation & open: all read, all write, all metadata write, all metadata read
**Summary:**
- Inject retryable metadata read, metadata write error concerning directory (e.g, dir sync, ) or file metadata (e.g, name, size, file creation/deletion...)
- Inject retryable errors to all major file types: random access file, sequential file, writable file
- Allow db stress test operations to handle above injected errors gracefully without crashing
- Change all error injection to thread-local implementation for easier disabling and enabling in the same thread. For example, we can control error handling thread to have no error injection. It's also cleaner in code.
- Limitation: compared to before, we now don't have write fault injection for backup/restore CopyOrCreateFiles work threads since they use anonymous background threads as well as read injection for db open bg thread
- Add a new flag to test error recovery without error injection so we can test the path where error recovery actually succeeds
- Some Refactory & fix to db stress test framework (see PR review comments)
- Fix some minor bugs surfaced (see PR review comments)
- Limitation: had to disable backup restore with metadata read/write injection since it surfaces too many testing issues. Will add it back later to focus on surfacing actual code/internal bugs first.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12713
Test Plan:
- Existing UT
- CI with no trivial error failure
Reviewed By: pdillinger
Differential Revision: D58326608
Pulled By: hx235
fbshipit-source-id: 011b5195aaeb6011641ae0a9194f7f2a0e325ad7
Summary:
Implemented two key segment extractors that satisfy the "segment prefix property," one with variable segment widths and one with fixed. Used these to create a couple of named configs and versions that are randomly selected by the crash test. On the read side, the required table_filter is set up everywhere I found the stress test uses iterator_upper_bound.
Writing filters on new SST files and applying filters on SST files to range queries are configured independently, to potentially help with isolating different sides of the functionality.
Not yet implemented / possible follow-up:
* Consider manipulating/skewing the query bounds to better exercise filters
* Not yet using categories in the extractors
* Not yet dynamically changing the filtering version
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12769
Test Plan: Some stress test trial runs, including with ASAN. Inserted some temporary probes to ensure code was being exercised (more or less) as intended.
Reviewed By: hx235
Differential Revision: D58547462
Pulled By: pdillinger
fbshipit-source-id: f7b1596dd668426268c5293ac17615f749703f52
Summary:
AttributeGroup is not yet supported in MultiOpsTxn Test. Disabling it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12781
Test Plan: Disabling in the test
Reviewed By: hx235
Differential Revision: D58757042
Pulled By: jaykorean
fbshipit-source-id: 8c3c85376e6ec0d1c7027b83abeb91eddc64236f
Summary:
This PR adds user property collector factory `CompactForTieringCollectorFactory` to support observe SST file and mark it as need compaction for fast tracking data to the proper tier.
A triggering ratio `compaction_trigger_ratio_` can be configured to achieve the following:
1) Setting the ratio to be equal to or smaller than 0 disables this collector
2) Setting the ratio to be within (0, 1] will write the number of observed eligible entries into a user property and marks a file as need-compaction when aforementioned condition is met.
3) Setting the ratio to be higher than 1 can be used to just writes the user table property, and not mark any file as need compaction.
For a column family that does not enable tiering feature, even if an effective configuration is provided, this collector is still disabled. For a file that is already on the last level, this collector is also disabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12760
Test Plan: Added unit tests
Reviewed By: pdillinger
Differential Revision: D58734976
Pulled By: jowlyzhang
fbshipit-source-id: 6daab2c4f62b5c6689c3c03e3b3907bbbe6b7a81
Summary:
Fix issue https://github.com/facebook/rocksdb/issues/12687.
A block cache may be shared by multiple column families. Therefore, when getting the aggregated property of the block cache, we need to deduplicate by instances of the block cache, meaning the same instance should only be counted once.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12755
Reviewed By: jowlyzhang
Differential Revision: D58508819
Pulled By: ajkr
fbshipit-source-id: 3b746841d7eac59f900387ec3b8c19dbcd20aae4
Summary:
As title. Changes include the following
- `Refresh()` moved from `Iterator` interface to `IteratorBase` so that `AttributeGroupIterator` can also have Refresh() API (implemention will be added in the future PR)
- `TestIterate()`'s main logic refactored into `TestIterateImpl()` so that it can be shared with `TestIterateAttributeGroups()`
- `VerifyIterator()` also changed so that verification code can be shared between `Iterator` and `AttributeGroupIterator`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12776
Test Plan:
Single CF Iterator
```
python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --use_attribute_group=0 --use_put_entity_one_in=1 --use_multi_get=1 --use_multi_cf_iterator=0 --verify_iterator_with_expected_state_one_in=2
```
CoalescingIterator
```
python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --use_attribute_group=0 --use_put_entity_one_in=1 --use_multi_get=1 --use_multi_cf_iterator=1 --verify_iterator_with_expected_state_one_in=2
```
AttributeGroupIterator
```
python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --use_attribute_group=1 --use_put_entity_one_in=1 --use_multi_get=1 --use_multi_cf_iterator=1 --verify_iterator_with_expected_state_one_in=2
```
Reviewed By: cbi42
Differential Revision: D58626165
Pulled By: jaykorean
fbshipit-source-id: 3e0a6ff72e51ecef9e06b65acfa53605a24d742e
Summary:
This is not currently caught by our public CI so adding a form of this check to `make check-headers`, which is part of the build-linux-unity-and-headers GHA job.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12774
Test Plan: manually added a violation, which was caught. Also caught an existing trivial violation (fixed). CI will verify it plays nice with GHA.
Reviewed By: jowlyzhang
Differential Revision: D58616601
Pulled By: pdillinger
fbshipit-source-id: e656ce82709660c088a3d3a5e41dd07655cb40e0
Summary:
Instead of completely disallowing `MultiCfIterator` when one or more child iterators will do manual prefix iteration (as suggested in https://github.com/facebook/rocksdb/issues/12770 ), just let `MultiCfIterator` operate as is even when there's a possibility of undefined result from child iterators. If one or more child iterators cause the heap to be empty, just return early and `Valid()` will return false.
It is still possible that heap is not empty when one or more child iterators are returning wrong keys. Basically, MultiCfIterator behaves the same as what we described in https://github.com/facebook/rocksdb/wiki/Prefix-Seek#manual-prefix-iterating - "RocksDB will not return error when it is misused and the iterating result will be undefined."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12773
Test Plan:
MultiCfIterator added back to the stress test
```
python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --use_attribute_group=0 --use_put_entity_one_in=1 --use_multi_get=1 --use_multi_cf_iterator=1 --verify_iterator_with_expected_state_one_in=2
```
Reviewed By: cbi42
Differential Revision: D58612055
Pulled By: jaykorean
fbshipit-source-id: e0dd942bed98382c59d463412dd8f163e6790b93
Summary:
This PR fix a possible manual flush hanging scenario because of its expectation that others will clear out excessive memtables was not met. The root cause is the FlushRequest rescheduling logic is using a stricter criteria for what a write stall is about to happen means than `WaitUntilFlushWouldNotStallWrites` does. Currently, the former thinks a write stall is about to happen when the last memtable is half full, and it will instead reschedule queued FlushRequest and not actually proceed with the flush. While the latter thinks if we already start to use the last memtable, we should wait until some other background flush jobs clear out some memtables before proceed this manual flush.
If we make them use the same criteria, we can guarantee that at any time when`WaitUntilFlushWouldNotStallWrites` is waiting, it's not because the rescheduling logic is holding it back.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12771
Test Plan: Added unit test
Reviewed By: ajkr
Differential Revision: D58603746
Pulled By: jowlyzhang
fbshipit-source-id: 9fa1c87c0175d47a40f584dfb1b497baa576755b
Summary:
When user-defined timestamps in Memtable only feature is enabled, all scheduled flushes go through a check to see if it's eligible to be rescheduled to retain user-defined timestamps. However when the user makes a manual flush request, their intention is for all the in memory data to be persisted into SST files as soon as possible. These two sides have some conflict of interest, the user can implement some workaround like https://github.com/facebook/rocksdb/issues/12631 to explicitly mark which one takes precedence. The implementation for this can be nuanced since the user needs to be aware of all the scenarios that can trigger a manual flush and handle the concurrency well etc.
In this PR, we updated the default behavior to give manual flush precedence when it's requested. The user-defined timestamps rescheduling mechanism is turned off when a manual flush is requested. Likewise, all error recovery triggered flushes skips the rescheduling mechanism too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12737
Test Plan: Add unit tests
Reviewed By: ajkr
Differential Revision: D58538246
Pulled By: jowlyzhang
fbshipit-source-id: 0b9b3d1af3e8d882f2d6a2406adda19324ba0694
Summary:
LLVM has detected a violation of `-Wdeprecated-dynamic-exception-spec`. Dynamic exceptions were removed in C++17. This diff fixes the deprecated instance(s).
See [Dynamic exception specification](https://en.cppreference.com/w/cpp/language/except_spec) and [noexcept specifier](https://en.cppreference.com/w/cpp/language/noexcept_spec).
Reviewed By: palmje
Differential Revision: D58528375
fbshipit-source-id: 130fecd3aa556e4cdb955feea53c442bd9fbc864
Summary:
Unknown why these would ignore options like deadline and read_tier. Setting total_order_seek=true is unnecessary because of the disable_prefix_seek (= true) parameter to NewIndexIterator. This is only used by the hash index, which uses total order seek if either the ReadOption or the parameter is true. The parameter is arguably redundant with the total_order_seek option, meaning it could be eliminated, but I think this case is exceptional (compared to e.g. no_io):
* Prefix seek is particular to user iterators, though might be usable, carefully, for other read operations.
* The historical default of total_order_seek=false in a sense is "wrong result by default" so cannot be interpreted as an intent to force prefix seek in an operation for which it might be usual or give bad results.
Also added a generic release note to cover this and related PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12764
Test Plan: existing tests
Reviewed By: hx235
Differential Revision: D58474240
Pulled By: pdillinger
fbshipit-source-id: 79014d9822ba8f09d57ce4524363aa0973017b68
Summary:
... in Index and CompressionDict readers (Filters in another PR). no_io and verify_checksums should be inferred from ReadOptions rather than specified redundantly.
Fixes incomplete propagation of ReadOptions in
UncompressionDictReader::GetOrReadUncompressionDictionar so is technically a functional change. (Related to https://github.com/facebook/rocksdb/issues/12757)
Also there was hardcoded no verify_checksums in DumpTable, but only for UncompressionDict, which doesn't make sense. Now using consistent ReadOptions and verify_checksum can be controlled for more reads together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12761
Test Plan: existing tests
Reviewed By: hx235
Differential Revision: D58450392
Pulled By: pdillinger
fbshipit-source-id: 0faed22832d664cb3b04a4c03ee77119977c200b
Summary:
POSIX semantics for LinkFile (hard links) allow linking a file
that is still being written two, with both the source and destination
showing any subsequent writes to the source. This may not be practical
semantics for some FileSystem implementations such as remote storage.
They might only link the flushed or sync-ed file contents at time of
LinkFile, or might even have undefined behavior if LinkFile is called on
a file still open for write (not yet "sealed"). This change builds on https://github.com/facebook/rocksdb/issues/12731
to bring more hygiene to our handling of WAL files in Checkpoint.
Specifically, we now Close WAL files as soon as they are either
(a) inactive and fully synced, or (b) inactive and obsolete (so maybe
never fully synced), rather than letting Close() happen in handling
obsolete files (maybe a background thread). This should not be a
performance issue as Close() should be trivial cost relative to other
IO ops, but just in case:
* We don't Close() while holding a mutex, to avoid blocking, and
* The old behavior is available with a new kill switch option
`background_close_inactive_wals`.
Stacked on https://github.com/facebook/rocksdb/issues/12731
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12734
Test Plan:
Extended existing unit test, especially adding a hygiene
check to FaultInjectionTestFS to detect LinkFile() on a file still open
for writes. FaultInjectionTestFS already has relevant tracking data, and
tests can opt out of the new check, as in a smoke test I have left for
the old, deprecated functionality `background_close_inactive_wals=true`.
Also ran lengthy blackbox_crash_test to ensure the hygiene check is OK
with the crash test. (The only place I can find we use LinkFile in
production is Checkpoint.)
Reviewed By: cbi42
Differential Revision: D58295284
Pulled By: pdillinger
fbshipit-source-id: 64d90ed8477e2366c19eaf9c4c5ad60b82cac5c6
Summary:
The crash test revealed a case in which the uncache functionality in ~BlockBasedTableReader could initiate an block read (IO), despite setting ReadOptions::read_tier = kBlockCacheTier.
The root cause is a place in the code where many people have over time decided to opt-in propagating ReadOptions and no one took the initiative to propagate ReadOptions by default (opt out / override only as needed). The fix is in partitioned_index_reader.cc. Here,
ReadOptions::readahead_size is opted-out to avoid churn in prefetch_test that is not clearly an improvement or regression. It's hard to tell given the poor state of relevant documentation https://github.com/facebook/rocksdb/issues/12756. The affected unit test was added in https://github.com/facebook/rocksdb/issues/10602.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12757
Test Plan: (Now postponed to a follow-up diff) I have added some new infrastructure to DEBUG builds to catch this specific kind of violation in unit tests and in the stress/crash test. `EnforceReadOpts` establishes a thread-local context under which we assert no IOs are performed if ReadOptions said it should be forbidden. With this new checking, the Uncache unit test would catch the critical step toward a violation (inner ReadOptions allowing IO, even if no IO is actually performed), which is fixed with the production code change.
Reviewed By: hx235
Differential Revision: D58421526
Pulled By: pdillinger
fbshipit-source-id: 9e9917a0e320c78967e751bd887926a2ed231d37
Summary:
Data race reported on
BlockBasedTableReader::Rep::uncache_aggressiveness because apparently a file can be marked obsolete through multiple table cache references in parallel. Using a relaxed atomic should resolve the race quite reasonably, especially considering this is a rare case and the racing writes should be storing the same value anyway.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12753
Test Plan: watch for TSAN crash test results
Reviewed By: ltamasi
Differential Revision: D58397473
Pulled By: pdillinger
fbshipit-source-id: 3e78b6adac4f7a7056790754bee42b3cb244f037
Summary:
Crash test showed a potential use-after-free where a file marked as obsolete and eligible for uncache on destruction is destroyed in the VersionSet destructor, which only happens as part of DB shutdown. At that point, the in-memory column families have already been destroyed, so attempting to uncache could use-after-free on stuff like getting the `user_comparator()` from the `internal_comparator()`.
I attempted to make it smarter, but wasn't able to untangle the destruction dependencies in a way that was safe, understandable, and maintainable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12751
Test Plan:
Reproduced by adding uncache_aggressiveness to an existing (but otherwise unrelated) test. This makes it a fair regression test.
Also added testing to ensure that trivial moves and DB close & reopen are well behaved with uncache_aggressiveness. Specifically, this issue doesn't seem to be because things are uncached inappropriately in those cases.
Reviewed By: ltamasi
Differential Revision: D58390058
Pulled By: pdillinger
fbshipit-source-id: 66ac9cb13bf02638fa80ee5b7218153d8bc7cfd3
Summary:
This option is recommended to be set for production use:
We recommend to set track_and_verify_wals_in_manifest to true
for production
https://github.com/facebook/rocksdb/wiki/Track-WAL-in-MANIFEST
This adds this setting to the C API, so it can be used by other languages.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12749
Reviewed By: ltamasi
Differential Revision: D58382892
Pulled By: ajkr
fbshipit-source-id: 885de4539745a3119b6b2a162ab4fca9fa975283
Summary:
I haven't been able to reproduce the failure, seen in https://github.com/facebook/rocksdb/actions/runs/9420830905/job/25953696902?pr=12734
```
[ RUN ] DBBlockCacheTypeTestInstance/DBBlockCacheTypeTest.Uncache/2
db/db_block_cache_test.cc:1415: Failure
Expected equality of these values:
cache->GetOccupancyCount()
Which is: 37
kBaselineCount + kNumDataBlocks + meta_blocks_per_file
Which is: 15
Google Test trace:
db/db_block_cache_test.cc:1346: ua=10000
db/db_block_cache_test.cc:1344: partitioned=1
db/db_block_cache_test.cc:1418: Failure
...
```
But it's consistent with a SuperVersion reference sticking around beyond the CompactRange, as I can reproduce the result with a dangling Iterator. Like some other tests have had trouble with periodic stats popping up randomly, I suspect that could be the explanation in this case.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12748
Test Plan: Watch for similar future failures
Reviewed By: ltamasi
Differential Revision: D58366031
Pulled By: pdillinger
fbshipit-source-id: b812ca8837b8c8b9cbda1b201d76316d145fa3ec
Summary:
**Context/Summary:**
https://github.com/facebook/rocksdb/pull/12567 disabled reopen with un-synced data loss in crash test since we discovered un-synced WAL loss and we currently don't support prefix recovery in reopen. This PR explicitly sync WAL data before close to avoid such data loss case from happening and add back the testing coverage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12746
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D58326890
Pulled By: hx235
fbshipit-source-id: 0865f715e97c5948d7cb3aea62fe2a626cb6522a
Summary:
The write_dbid_to_manifest option is documented as "We recommend setting this flag to true". However, there is no way to set this flag from the C API.
Add the following functions to the C API:
* rocksdb_get_db_identity
* rocksdb_options_get_write_dbid_to_manifest
* rocksdb_options_set_write_dbid_to_manifest
Add a test that this option preserves the ID across checkpoints.
c.cc:
* Remove outdated comments about missing C API functions that exist.
* Document that CopyString is intended for binary data and is not NUL terminated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12736
Reviewed By: ltamasi
Differential Revision: D58202117
Pulled By: ajkr
fbshipit-source-id: 707b110df5c4bd118d65548327428a53a9dc3019
Summary:
Currently, when files become obsolete, the block cache entries associated with them just age out naturally. With pure LRU, this is not too bad, as once you "use" enough cache entries to (re-)fill the cache, you are guranteed to have purged the obsolete entries. However, HyperClockCache is a counting clock cache with a somewhat longer memory, so could be more negatively impacted by previously-hot cache entries becoming obsolete, and taking longer to age out than newer single-hit entries.
Part of the reason we still have this natural aging-out is that there's almost no connection between block cache entries and the file they are associated with. Everything is hashed into the same pool(s) of entries with nothing like a secondary index based on file. Keeping track of such an index could be expensive.
This change adds a new, mutable CF option `uncache_aggressiveness` for erasing obsolete block cache entries. The process can be speculative, lossy, or unproductive because not all potential block cache entries associated with files will be resident in memory, and attempting to remove them all could be wasted CPU time. Rather than a simple on/off switch, `uncache_aggressiveness` basically tells RocksDB how much CPU you're willing to burn trying to purge obsolete block cache entries. When such efforts are not sufficiently productive for a file, we stop and move on.
The option is in ColumnFamilyOptions so that it is dynamically changeable for already-open files, and customizeable by CF.
Note that this block cache removal happens as part of the process of purging obsolete files, which is often in a background thread (depending on `background_purge_on_iterator_cleanup` and `avoid_unnecessary_blocking_io` options) rather than along CPU critical paths.
Notable auxiliary code details:
* Possibly fixing some issues with trivial moves with `only_delete_metadata`: unnecessary TableCache::Evict in that case and missing from the ObsoleteFileInfo move operator. (Not able to reproduce an current failure.)
* Remove suspicious TableCache::Erase() from VersionSet::AddObsoleteBlobFile() (TODO follow-up item)
Marked EXPERIMENTAL until more thorough validation is complete.
Direct stats of this functionality are omitted because they could be misleading. Block cache hit rate is a better indicator of benefit, and CPU profiling a better indicator of cost.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12694
Test Plan:
* Unit tests added, including refactoring an existing test to make better use of parameterized tests.
* Added to crash test.
* Performance, sample command:
```
for I in `seq 1 10`; do for UA in 300; do for CT in lru_cache fixed_hyper_clock_cache auto_hyper_clock_cache; do rm -rf /dev/shm/test3; TEST_TMPDIR=/dev/shm/test3 /usr/bin/time ./db_bench -benchmarks=readwhilewriting -num=13000000 -read_random_exp_range=6 -write_buffer_size=10000000 -bloom_bits=10 -cache_type=$CT -cache_size=390000000 -cache_index_and_filter_blocks=1 -disable_wal=1 -duration=60 -statistics -uncache_aggressiveness=$UA 2>&1 | grep -E 'micros/op|rocksdb.block.cache.data.(hit|miss)|rocksdb.number.keys.(read|written)|maxresident' | awk '/rocksdb.block.cache.data.miss/ { miss = $4 } /rocksdb.block.cache.data.hit/ { hit = $4 } { print } END { print "hit rate = " ((hit * 1.0) / (miss + hit)) }' | tee -a results-$CT-$UA; done; done; done
```
Averaging 10 runs each case, block cache data block hit rates
```
lru_cache
UA=0 -> hit rate = 0.327, ops/s = 87668, user CPU sec = 139.0
UA=300 -> hit rate = 0.336, ops/s = 87960, user CPU sec = 139.0
fixed_hyper_clock_cache
UA=0 -> hit rate = 0.336, ops/s = 100069, user CPU sec = 139.9
UA=300 -> hit rate = 0.343, ops/s = 100104, user CPU sec = 140.2
auto_hyper_clock_cache
UA=0 -> hit rate = 0.336, ops/s = 97580, user CPU sec = 140.5
UA=300 -> hit rate = 0.345, ops/s = 97972, user CPU sec = 139.8
```
Conclusion: up to roughly 1 percentage point of improved block cache hit rate, likely leading to overall improved efficiency (because the foreground CPU cost of cache misses likely outweighs the background CPU cost of erasure, let alone I/O savings).
Reviewed By: ajkr
Differential Revision: D57932442
Pulled By: pdillinger
fbshipit-source-id: 84a243ca5f965f731f346a4853009780a904af6c
Summary:
As titled. Also added the newest user-defined timestamp into the `MemTableInfo`. This can be a useful info in the callback.
Added some unit tests as examples for how users can use two separate approaches to allow manual flush / manual compactions to go through when the user-defined timestamps in memtable only feature is enabled. One approach relies on selectively increase cutoff timestamp in `OnMemtableSeal` callback when it's initiated by a manual flush. Another approach is to increase cutoff timestamp in `OnManualFlushScheduled` callback. The caveats of the approaches are also documented in the unit test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12631
Reviewed By: ajkr
Differential Revision: D58260528
Pulled By: jowlyzhang
fbshipit-source-id: bf446d7140affdf124744095e0a179fa6e427532
Summary:
**Context/Summary:** a better API design is decided lately so we decided to revert these two changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12738
Test Plan: - CI
Reviewed By: ajkr
Differential Revision: D58162165
Pulled By: hx235
fbshipit-source-id: 9bbe4d2fe9fbe39213f4cf137a2d419e6ffb8e16
Summary:
Background: there is one active WAL file but there can be
several more WAL files in various states. Those other WALs are always
in a "flushed" state but could be on the `logs_` list not yet fully
synced. We currently allow any WAL that is not the active WAL to be
hard-linked when creating a Checkpoint, as although it might still be
open for write, we are not appending any more data to it.
The problem is that a created Checkpoint is supposed to be fully synced
on return of that function, and a hard-linked WAL in the state described
above might not be fully synced. (Through some prudence in https://github.com/facebook/rocksdb/issues/10083,
it would synced if using track_and_verify_wals_in_manifest=true.)
The fix is a step toward a long term goal of removing the need to query
the filesystem to determine WAL files and their state. (I consider it
dubious any time we independently read from or query metadata from a
file we have open for writing, as this makes us more susceptible to
FileSystem deficiencies or races.) More specifically:
* Detect which WALs might not be fully synced, according to our DBImpl
metadata, and prevent hard linking those (with `trim_to_size=true`
from `GetLiveFilesStorageInfo()`. And while we're at it, use our known
flushed sizes for those WALs.
* To avoid a race between that and GetSortedWalFiles(), track a maximum
needed WAL number for the Checkpoint/GetLiveFilesStorageInfo.
* Because of the level of consistency provided by those two, we no
longer need to consider syncing as part of the FlushWAL in
GetLiveFilesStorageInfo. (We determine the max WAL number consistent
with the manifest file size, while holding DB mutex. Should make
track_and_verify_wals_in_manifest happy.) This makes the premise of
test PutRaceWithCheckpointTrackedWalSync obsolete (sync point callback
no longer hit) so the test is removed, with crash test as backstop for
related issues. See https://github.com/facebook/rocksdb/issues/10185
Stacked on https://github.com/facebook/rocksdb/issues/12729
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12731
Test Plan:
Expanded an existing test, which now fails before fix.
Also long runs of blackbox_crash_test with amplified checkpoint frequency.
Reviewed By: cbi42
Differential Revision: D58199629
Pulled By: pdillinger
fbshipit-source-id: 376e55f4a2b082cd2adb6408a41209de14422382
Summary:
In places (e.g. GetSortedWals()) RocksDB relies on querying the file size or even reading the contents of files currently open for writing, and as in POSIX semantics, expects to see the flushed size and contents regardless of what has been synced. FaultInjectionTestFS historically did not emulate this behavior, only showing synced data from such read operations. (Different from FaultInjectionTestEnv--sigh.)
This change makes the "proper" behavior the default behavior, at least for GetFileSize and FSSequentialFile. However, this new functionality is disabled in db_stress because of undiagnosed, unresolved issues.
Also removes unused and confusing field `pos_at_last_flush_`
This change is needed to support testing a relevant bug fix (in a follow-up diff). Other suggested follow-up:
* Fix db_stress not to rely on the old behavior, and fix a related FIXME in db_stress_test_base.cc in LockWAL testing.
* Fill in some corner cases in the FileSystem API for reading unsynced data (see new TODO items).
* Consider deprecating and removing Flush() API functions from FileSystem APIs. It is not clear to me that there is a supported scenario in which they do anything but confuse API users and developers. If there is a use for them, it doesn't appear to be tested.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12729
Test Plan: applies to all unit tests successfully, just updating the unit test from https://github.com/facebook/rocksdb/issues/12556 due to relying on the errant behavior. Also added a specific unit test
Reviewed By: hx235
Differential Revision: D58091835
Pulled By: pdillinger
fbshipit-source-id: f47a63b2b000f5875b6293a98577bff663d7fd33
Summary:
When https://github.com/facebook/rocksdb/issues/12343 added support to bulk load external files while column family enables user-defined timestamps, it's a requirement that the external file doesn't overlap with the DB in key ranges. More specifically, the external file should not contain a user key (without timestamp) that already have some entries in the DB.
All the `*Overlap*` functions like `RangeOverlapWithMemtable`, `RangeOverlapWithCompaction` are using `CompareWithoutTimestamp` to check for overlap already. One thing that is missing here is we need to extend the external file's user key boundary for this check to avoid missing the checks for the boundary user keys. For example, with the current way of checking things where `external_file_info.smallest.user_key()` is used as the left boundary, and `external_file_info.largest.user_key()` is used as the right boundary, a file with this entry: (b, 40) can fit into a DB with these two entries: (b, 30), (c, 20).
To avoid this, we extend the user key boundaries used for overlap check, by updating the left boundary with the maximum timestamp and the right boundary with the minimum timestamp.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12735
Test Plan: Added unit test
Reviewed By: ltamasi
Differential Revision: D58152117
Pulled By: jowlyzhang
fbshipit-source-id: 9cba61e7357f6d76ad44c258381c35073ebbf347
Summary:
```
ERROR: AddressSanitizer: container-overflow on address 0x506000682221 at pc 0x5583da569f76 bp 0x7f0ec8a9ffb0 sp 0x7f0ec8a9f780
WRITE of size 53 at 0x506000682221 thread T29
#0 0x5583da569f75 in pread
https://github.com/facebook/rocksdb/issues/1 0x5583e334fde4 in rocksdb::PosixRandomAccessFile::Read(unsigned long, unsigned long, rocksdb::IOOptions const&, rocksdb::Slice*, char*, rocksdb::IODebugContext*) const /rocksdb/env/io_posix.cc:580:9
https://github.com/facebook/rocksdb/issues/2 0x5583e2cac42b in rocksdb::(anonymous namespace)::CompositeRandomAccessFileWrapper::Read(unsigned long, unsigned long, rocksdb::Slice*, char*) const /rocksdb/env/composite_env.cc:61:21
https://github.com/facebook/rocksdb/issues/3 0x5583e2c8a8e4 in rocksdb::(anonymous namespace)::LegacyRandomAccessFileWrapper::Read(unsigned long, unsigned long, rocksdb::IOOptions const&, rocksdb::Slice*, char*, rocksdb::IODebugContext*) const /rocksdb/env/env.cc:152:41
https://github.com/facebook/rocksdb/issues/4 0x5583e2d6cbfb in rocksdb::RandomAccessFileReader::Read(rocksdb::IOOptions const&, unsigned long, unsigned long, rocksdb::Slice*, char*, std::__2::unique_ptr<char [], std::__2::default_delete<char []>>*, rocksdb::Env::IOPriority) const /rocksdb/file/random_access_file_reader.cc:204:25
https://github.com/facebook/rocksdb/issues/5 0x5583e307c614 in rocksdb::ReadFooterFromFile(rocksdb::IOOptions const&, rocksdb::RandomAccessFileReader*, rocksdb::FilePrefetchBuffer*, unsigned long, rocksdb::Footer*, unsigned long) /rocksdb/table/format.cc:383:17
https://github.com/facebook/rocksdb/issues/6 0x5583e2f88456 in rocksdb::BlockBasedTable::Open(rocksdb::ReadOptions const&, rocksdb::ImmutableOptions const&, rocksdb::EnvOptions const&, rocksdb::BlockBasedTableOptions const&, rocksdb::InternalKeyComparator const&, std::__2::unique_ptr<rocksdb::RandomAccessFileReader, std::__2::default_delete<rocksdb::RandomAccessFileReader>>&&, unsigned long, std::__2::unique_ptr<rocksdb::TableReader, std::__2::default_delete<rocksdb::TableReader>>*, std::__2::shared_ptr<rocksdb::CacheReservationManager>, std::__2::shared_ptr<rocksdb::SliceTransform const> const&, bool, bool, int, bool, unsigned long, bool, rocksdb::TailPrefetchStats*, rocksdb::BlockCacheTracer*, unsigned long, std::__2::basic_string<char, std::__2::char_traits<char>, std::__2::allocator<char>> const&, unsigned long) /rocksdb/table/block_based/block_based_table_reader.cc:610:9
https://github.com/facebook/rocksdb/issues/7 0x5583e2ef7837 in rocksdb::BlockBasedTableFactory::NewTableReader(rocksdb::ReadOptions const&, rocksdb::TableReaderOptions const&, std::__2::unique_ptr<rocksdb::RandomAccessFileReader, std::__2::default_delete<rocksdb::RandomAccessFileReader>>&&, unsigned long, std::__2::unique_ptr<rocksdb::TableReader, std::__2::default_delete<rocksdb::TableReader>>*, bool) const /rocksdb/table/block_based/block_based_table_factory.cc:599:10
https://github.com/facebook/rocksdb/issues/8 0x5583e2ab873c in rocksdb::TableCache::GetTableReader(rocksdb::ReadOptions const&, rocksdb::FileOptions const&, rocksdb::InternalKeyComparator const&, rocksdb::FileDescriptor const&, bool, bool, rocksdb::HistogramImpl*, std::__2::unique_ptr<rocksdb::TableReader, std::__2::default_delete<rocksdb::TableReader>>*, std::__2::shared_ptr<rocksdb::SliceTransform const> const&, bool, int, bool, unsigned long, rocksdb::Temperature) /rocksdb/db/table_cache.cc:142:34
https://github.com/facebook/rocksdb/issues/9 0x5583e2aba5f6 in rocksdb::TableCache::FindTable(rocksdb::ReadOptions const&, rocksdb::FileOptions const&, rocksdb::InternalKeyComparator const&, rocksdb::FileDescriptor const&, rocksdb::Cache::Handle**, std::__2::shared_ptr<rocksdb::SliceTransform const> const&, bool, bool, rocksdb::HistogramImpl*, bool, int, bool, unsigned long, rocksdb::Temperature) /rocksdb/db/table_cache.cc:190:16
https://github.com/facebook/rocksdb/issues/10 0x5583e2abb7e1 in rocksdb::TableCache::NewIterator(rocksdb::ReadOptions const&, rocksdb::FileOptions const&, rocksdb::InternalKeyComparator const&, rocksdb::FileMetaData const&, rocksdb::RangeDelAggregator*, std::__2::shared_ptr<rocksdb::SliceTransform const> const&, rocksdb::TableReader**, rocksdb::HistogramImpl*, rocksdb::TableReaderCaller, rocksdb::Arena*, bool, int, unsigned long, rocksdb::InternalKey const*, rocksdb::InternalKey const*, bool) /rocksdb/db/table_cache.cc:235:9
https://github.com/facebook/rocksdb/issues/11 0x5583e28d14cf in rocksdb::BuildTable(std::__2::basic_string<char, std::__2::char_traits<char>, std::__2::allocator<char>> const&, rocksdb::VersionSet*, rocksdb::ImmutableDBOptions const&, rocksdb::TableBuilderOptions const&, rocksdb::FileOptions const&, rocksdb::TableCache*, rocksdb::InternalIteratorBase<rocksdb::Slice>*, std::__2::vector<std::__2::unique_ptr<rocksdb::FragmentedRangeTombstoneIterator, std::__2::default_delete<rocksdb::FragmentedRangeTombstoneIterator>>, std::__2::allocator<std::__2::unique_ptr<rocksdb::FragmentedRangeTombstoneIterator, std::__2::default_delete<rocksdb::FragmentedRangeTombstoneIterator>>>>, rocksdb::FileMetaData*, std::__2::vector<rocksdb::BlobFileAddition, std::__2::allocator<rocksdb::BlobFileAddition>>*, std::__2::vector<unsigned long, std::__2::allocator<unsigned long>>, unsigned long, unsigned long, rocksdb::SnapshotChecker*, bool, rocksdb::InternalStats*, rocksdb::IOStatus*, std::__2::shared_ptr<rocksdb::IOTracer> const&, rocksdb::BlobFileCreationReason, rocksdb::EventLogger*, int, rocksdb::Env::IOPriority, rocksdb::TableProperties*, rocksdb::Env::WriteLifeTimeHint, std::__2::basic_string<char, std::__2::char_traits<char>, std::__2::allocator<char>> const*, rocksdb::BlobFileCompletionCallback*, unsigned long*, unsigned long*, unsigned long*) /rocksdb/db/builder.cc:335:57
https://github.com/facebook/rocksdb/issues/12 0x5583e29bf29d in rocksdb::FlushJob::WriteLevel0Table() /rocksdb/db/flush_job.cc:919:11
https://github.com/facebook/rocksdb/issues/13 0x5583e29b33ac in rocksdb::FlushJob::Run(rocksdb::LogsWithPrepTracker*, rocksdb::FileMetaData*, bool*) /rocksdb/db/flush_job.cc:276:9
https://github.com/facebook/rocksdb/issues/14 0x5583e27a4781 in rocksdb::DBImpl::FlushMemTableToOutputFile(rocksdb::ColumnFamilyData*, rocksdb::MutableCFOptions const&, bool*, rocksdb::JobContext*, rocksdb::SuperVersionContext*, std::__2::vector<unsigned long, std::__2::allocator<unsigned long>>&, unsigned long, rocksdb::SnapshotChecker*, rocksdb::LogBuffer*, rocksdb::Env::Priority) /rocksdb/db/db_impl/db_impl_compaction_flush.cc:258:19
https://github.com/facebook/rocksdb/issues/15 0x5583e27a7a96 in rocksdb::DBImpl::FlushMemTablesToOutputFiles(rocksdb::autovector<rocksdb::DBImpl::BGFlushArg, 8ul> const&, bool*, rocksdb::JobContext*, rocksdb::LogBuffer*, rocksdb::Env::Priority) /rocksdb/db/db_impl/db_impl_compaction_flush.cc:377:14
https://github.com/facebook/rocksdb/issues/16 0x5583e27d6777 in rocksdb::DBImpl::BackgroundFlush(bool*, rocksdb::JobContext*, rocksdb::LogBuffer*, rocksdb::FlushReason*, rocksdb::Env::Priority) /rocksdb/db/db_impl/db_impl_compaction_flush.cc:2778:14
https://github.com/facebook/rocksdb/issues/17 0x5583e27d14e2 in rocksdb::DBImpl::BackgroundCallFlush(rocksdb::Env::Priority) /rocksdb/db/db_impl/db_impl_compaction_flush.cc:2817:16
https://github.com/facebook/rocksdb/issues/18 0x5583e323d353 in std::__2::__function::__policy_func<void ()>::operator()[abi:ne180100]() const /root/build/3rdParty/llvm/runtimes/include/c++/v1/__functional/function.h:714:12
https://github.com/facebook/rocksdb/issues/19 0x5583e323d353 in std::__2::function<void ()>::operator()() const /root/build/3rdParty/llvm/runtimes/include/c++/v1/__functional/function.h:981:10
https://github.com/facebook/rocksdb/issues/20 0x5583e323d353 in rocksdb::ThreadPoolImpl::Impl::BGThread(unsigned long) /rocksdb/util/threadpool_imp.cc:266:5
https://github.com/facebook/rocksdb/issues/21 0x5583e3243d18 in decltype(std::declval<void (*)(void*)>()(std::declval<rocksdb::BGThreadMetadata*>())) std::__2::__invoke[abi:ne180100]<void (*)(void*), rocksdb::BGThreadMetadata*>(void (*&&)(void*), rocksdb::BGThreadMetadata*&&) /root/build/3rdParty/llvm/runtimes/include/c++/v1/__type_traits/invoke.h:344:25
https://github.com/facebook/rocksdb/issues/22 0x5583e3243d18 in void std::__2::__thread_execute[abi:ne180100]<std::__2::unique_ptr<std::__2::__thread_struct, std::__2::default_delete<std::__2::__thread_struct>>, void (*)(void*), rocksdb::BGThreadMetadata*, 2ul>(std::__2::tuple<std::__2::unique_ptr<std::__2::__thread_struct, std::__2::default_delete<std::__2::__thread_struct>>, void (*)(void*), rocksdb::BGThreadMetadata*>&, std::__2::__tuple_indices<2ul>) /root/build/3rdParty/llvm/runtimes/include/c++/v1/__thread/thread.h:193:3
https://github.com/facebook/rocksdb/issues/23 0x5583e3243d18 in void* std::__2::__thread_proxy[abi:ne180100]<std::__2::tuple<std::__2::unique_ptr<std::__2::__thread_struct, std::__2::default_delete<std::__2::__thread_struct>>, void (*)(void*), rocksdb::BGThreadMetadata*>>(void*) /root/build/3rdParty/llvm/runtimes/include/c++/v1/__thread/thread.h:202:3
https://github.com/facebook/rocksdb/issues/24 0x5583da5e819e in asan_thread_start(void*) crtstuff.c
https://github.com/facebook/rocksdb/issues/25 0x7f0eda362a93 in start_thread nptl/pthread_create.c:447:8
https://github.com/facebook/rocksdb/issues/26 0x7f0eda3efc3b in clone3 misc/../sysdeps/unix/sysv/linux/x86_64/clone3.S:78
0x506000682221 is located 1 bytes inside of 56-byte region [0x506000682220,0x506000682258)
allocated by thread T29 here:
#0 0x5583da6281d1 in operator new(unsigned long)
https://github.com/facebook/rocksdb/issues/1 0x5583da6c987d in __libcpp_operator_new<unsigned long> /root/build/3rdParty/llvm/runtimes/include/c++/v1/new:271:10
https://github.com/facebook/rocksdb/issues/2 0x5583da6c987d in __libcpp_allocate /root/build/3rdParty/llvm/runtimes/include/c++/v1/new:295:10
https://github.com/facebook/rocksdb/issues/3 0x5583da6c987d in allocate /root/build/3rdParty/llvm/runtimes/include/c++/v1/__memory/allocator.h:125:32
https://github.com/facebook/rocksdb/issues/4 0x5583da6c987d in allocate_at_least /root/build/3rdParty/llvm/runtimes/include/c++/v1/__memory/allocator.h:131:13
https://github.com/facebook/rocksdb/issues/5 0x5583da6c987d in allocate_at_least<std::__2::allocator<char> > /root/build/3rdParty/llvm/runtimes/include/c++/v1/__memory/allocate_at_least.h:34:20
https://github.com/facebook/rocksdb/issues/6 0x5583da6c987d in __allocate_at_least<std::__2::allocator<char> > /root/build/3rdParty/llvm/runtimes/include/c++/v1/__memory/allocate_at_least.h:42:10
https://github.com/facebook/rocksdb/issues/7 0x5583da6c987d in std::__2::basic_string<char, std::__2::char_traits<char>, std::__2::allocator<char>>::__shrink_or_extend[abi:ne180100](unsigned long) /root/build/3rdParty/llvm/runtimes/include/c++/v1/string:3236:27
https://github.com/facebook/rocksdb/issues/8 0x5583e307c5aa in std::__2::basic_string<char, std::__2::char_traits<char>, std::__2::allocator<char>>::reserve(unsigned long) /root/build/3rdParty/llvm/runtimes/include/c++/v1/string:3207:3
https://github.com/facebook/rocksdb/issues/9 0x5583e307c5aa in rocksdb::ReadFooterFromFile(rocksdb::IOOptions const&, rocksdb::RandomAccessFileReader*, rocksdb::FilePrefetchBuffer*, unsigned long, rocksdb::Footer*, unsigned long) /rocksdb/table/format.cc:382:18
https://github.com/facebook/rocksdb/issues/10 0x5583e2f88456 in rocksdb::BlockBasedTable::Open(rocksdb::ReadOptions const&, rocksdb::ImmutableOptions const&, rocksdb::EnvOptions const&, rocksdb::BlockBasedTableOptions const&, rocksdb::InternalKeyComparator const&, std::__2::unique_ptr<rocksdb::RandomAccessFileReader, std::__2::default_delete<rocksdb::RandomAccessFileReader>>&&, unsigned long, std::__2::unique_ptr<rocksdb::TableReader, std::__2::default_delete<rocksdb::TableReader>>*, std::__2::shared_ptr<rocksdb::CacheReservationManager>, std::__2::shared_ptr<rocksdb::SliceTransform const> const&, bool, bool, int, bool, unsigned long, bool, rocksdb::TailPrefetchStats*, rocksdb::BlockCacheTracer*, unsigned long, std::__2::basic_string<char, std::__2::char_traits<char>, std::__2::allocator<char>> const&, unsigned long) /rocksdb/table/block_based/block_based_table_reader.cc:610:9
https://github.com/facebook/rocksdb/issues/11 0x5583e2ef7837 in rocksdb::BlockBasedTableFactory::NewTableReader(rocksdb::ReadOptions const&, rocksdb::TableReaderOptions const&, std::__2::unique_ptr<rocksdb::RandomAccessFileReader, std::__2::default_delete<rocksdb::RandomAccessFileReader>>&&, unsigned long, std::__2::unique_ptr<rocksdb::TableReader, std::__2::default_delete<rocksdb::TableReader>>*, bool) const /rocksdb/table/block_based/block_based_table_factory.cc:599:10
https://github.com/facebook/rocksdb/issues/12 0x5583e2ab873c in rocksdb::TableCache::GetTableReader(rocksdb::ReadOptions const&, rocksdb::FileOptions const&, rocksdb::InternalKeyComparator const&, rocksdb::FileDescriptor const&, bool, bool, rocksdb::HistogramImpl*, std::__2::unique_ptr<rocksdb::TableReader, std::__2::default_delete<rocksdb::TableReader>>*, std::__2::shared_ptr<rocksdb::SliceTransform const> const&, bool, int, bool, unsigned long, rocksdb::Temperature) /rocksdb/db/table_cache.cc:142:34
https://github.com/facebook/rocksdb/issues/13 0x5583e2aba5f6 in rocksdb::TableCache::FindTable(rocksdb::ReadOptions const&, rocksdb::FileOptions const&, rocksdb::InternalKeyComparator const&, rocksdb::FileDescriptor const&, rocksdb::Cache::Handle**, std::__2::shared_ptr<rocksdb::SliceTransform const> const&, bool, bool, rocksdb::HistogramImpl*, bool, int, bool, unsigned long, rocksdb::Temperature) /rocksdb/db/table_cache.cc:190:16
https://github.com/facebook/rocksdb/issues/14 0x5583e2abb7e1 in rocksdb::TableCache::NewIterator(rocksdb::ReadOptions const&, rocksdb::FileOptions const&, rocksdb::InternalKeyComparator const&, rocksdb::FileMetaData const&, rocksdb::RangeDelAggregator*, std::__2::shared_ptr<rocksdb::SliceTransform const> const&, rocksdb::TableReader**, rocksdb::HistogramImpl*, rocksdb::TableReaderCaller, rocksdb::Arena*, bool, int, unsigned long, rocksdb::InternalKey const*, rocksdb::InternalKey const*, bool) /rocksdb/db/table_cache.cc:235:9
https://github.com/facebook/rocksdb/issues/15 0x5583e28d14cf in rocksdb::BuildTable(std::__2::basic_string<char, std::__2::char_traits<char>, std::__2::allocator<char>> const&, rocksdb::VersionSet*, rocksdb::ImmutableDBOptions const&, rocksdb::TableBuilderOptions const&, rocksdb::FileOptions const&, rocksdb::TableCache*, rocksdb::InternalIteratorBase<rocksdb::Slice>*, std::__2::vector<std::__2::unique_ptr<rocksdb::FragmentedRangeTombstoneIterator, std::__2::default_delete<rocksdb::FragmentedRangeTombstoneIterator>>, std::__2::allocator<std::__2::unique_ptr<rocksdb::FragmentedRangeTombstoneIterator, std::__2::default_delete<rocksdb::FragmentedRangeTombstoneIterator>>>>, rocksdb::FileMetaData*, std::__2::vector<rocksdb::BlobFileAddition, std::__2::allocator<rocksdb::BlobFileAddition>>*, std::__2::vector<unsigned long, std::__2::allocator<unsigned long>>, unsigned long, unsigned long, rocksdb::SnapshotChecker*, bool, rocksdb::InternalStats*, rocksdb::IOStatus*, std::__2::shared_ptr<rocksdb::IOTracer> const&, rocksdb::BlobFileCreationReason, rocksdb::EventLogger*, int, rocksdb::Env::IOPriority, rocksdb::TableProperties*, rocksdb::Env::WriteLifeTimeHint, std::__2::basic_string<char, std::__2::char_traits<char>, std::__2::allocator<char>> const*, rocksdb::BlobFileCompletionCallback*, unsigned long*, unsigned long*, unsigned long*) /rocksdb/db/builder.cc:335:57
https://github.com/facebook/rocksdb/issues/16 0x5583e29bf29d in rocksdb::FlushJob::WriteLevel0Table() /rocksdb/db/flush_job.cc:919:11
https://github.com/facebook/rocksdb/issues/17 0x5583e29b33ac in rocksdb::FlushJob::Run(rocksdb::LogsWithPrepTracker*, rocksdb::FileMetaData*, bool*) /rocksdb/db/flush_job.cc:276:9
https://github.com/facebook/rocksdb/issues/18 0x5583e27a4781 in rocksdb::DBImpl::FlushMemTableToOutputFile(rocksdb::ColumnFamilyData*, rocksdb::MutableCFOptions const&, bool*, rocksdb::JobContext*, rocksdb::SuperVersionContext*, std::__2::vector<unsigned long, std::__2::allocator<unsigned long>>&, unsigned long, rocksdb::SnapshotChecker*, rocksdb::LogBuffer*, rocksdb::Env::Priority) /rocksdb/db/db_impl/db_impl_compaction_flush.cc:258:19
https://github.com/facebook/rocksdb/issues/19 0x5583e27a7a96 in rocksdb::DBImpl::FlushMemTablesToOutputFiles(rocksdb::autovector<rocksdb::DBImpl::BGFlushArg, 8ul> const&, bool*, rocksdb::JobContext*, rocksdb::LogBuffer*, rocksdb::Env::Priority) /rocksdb/db/db_impl/db_impl_compaction_flush.cc:377:14
https://github.com/facebook/rocksdb/issues/20 0x5583e27d6777 in rocksdb::DBImpl::BackgroundFlush(bool*, rocksdb::JobContext*, rocksdb::LogBuffer*, rocksdb::FlushReason*, rocksdb::Env::Priority) /rocksdb/db/db_impl/db_impl_compaction_flush.cc:2778:14
https://github.com/facebook/rocksdb/issues/21 0x5583e27d14e2 in rocksdb::DBImpl::BackgroundCallFlush(rocksdb::Env::Priority) /rocksdb/db/db_impl/db_impl_compaction_flush.cc:2817:16
https://github.com/facebook/rocksdb/issues/22 0x5583e323d353 in std::__2::__function::__policy_func<void ()>::operator()[abi:ne180100]() const /root/build/3rdParty/llvm/runtimes/include/c++/v1/__functional/function.h:714:12
https://github.com/facebook/rocksdb/issues/23 0x5583e323d353 in std::__2::function<void ()>::operator()() const /root/build/3rdParty/llvm/runtimes/include/c++/v1/__functional/function.h:981:10
https://github.com/facebook/rocksdb/issues/24 0x5583e323d353 in rocksdb::ThreadPoolImpl::Impl::BGThread(unsigned long) /rocksdb/util/threadpool_imp.cc:266:5
https://github.com/facebook/rocksdb/issues/25 0x5583e3243d18 in decltype(std::declval<void (*)(void*)>()(std::declval<rocksdb::BGThreadMetadata*>())) std::__2::__invoke[abi:ne180100]<void (*)(void*), rocksdb::BGThreadMetadata*>(void (*&&)(void*), rocksdb::BGThreadMetadata*&&) /root/build/3rdParty/llvm/runtimes/include/c++/v1/__type_traits/invoke.h:344:25
https://github.com/facebook/rocksdb/issues/26 0x5583e3243d18 in void std::__2::__thread_execute[abi:ne180100]<std::__2::unique_ptr<std::__2::__thread_struct, std::__2::default_delete<std::__2::__thread_struct>>, void (*)(void*), rocksdb::BGThreadMetadata*, 2ul>(std::__2::tuple<std::__2::unique_ptr<std::__2::__thread_struct, std::__2::default_delete<std::__2::__thread_struct>>, void (*)(void*), rocksdb::BGThreadMetadata*>&, std::__2::__tuple_indices<2ul>) /root/build/3rdParty/llvm/runtimes/include/c++/v1/__thread/thread.h:193:3
https://github.com/facebook/rocksdb/issues/27 0x5583e3243d18 in void* std::__2::__thread_proxy[abi:ne180100]<std::__2::tuple<std::__2::unique_ptr<std::__2::__thread_struct, std::__2::default_delete<std::__2::__thread_struct>>, void (*)(void*), rocksdb::BGThreadMetadata*>>(void*) /root/build/3rdParty/llvm/runtimes/include/c++/v1/__thread/thread.h:202:3
https://github.com/facebook/rocksdb/issues/28 0x5583da5e819e in asan_thread_start(void*) crtstuff.c
HINT: if you don't care about these errors you may set ASAN_OPTIONS=detect_container_overflow=0.
If you suspect a false positive see also: https://github.com/google/sanitizers/wiki/AddressSanitizerContainerOverflow.
AddressSanitizer:container-overflow in pread
Shadow bytes around the buggy address:
0x506000681f80: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x506000682000: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x506000682080: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x506000682100: fa fa fa fa fa fa fa fa fa fa fa fa 00 00 00 00
0x506000682180: 00 00 00 fa fa fa fa fa fa fa fa fa fa fa fa fa
=>0x506000682200: fa fa fa fa[01]fc fc fc fc fc fc fa fa fa fa fa
0x506000682280: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x506000682300: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 01
0x506000682380: fa fa fa fa fd fd fd fd fd fd fd fd fa fa fa fa
0x506000682400: fd fd fd fd fd fd fd fa fa fa fa fa fd fd fd fd
0x506000682480: fd fd fd fd fa fa fa fa fd fd fd fd fd fd fd fd
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12722
Reviewed By: hx235
Differential Revision: D58118264
Pulled By: ajkr
fbshipit-source-id: 0dd914c886c022d82697b769d664ba52de0770de
Summary:
These messages indicate that SST file was created by a pre-9.0.0 RocksDB. Eventually, `TailPrefetchStats` might be removed, so it would be more informative if log message also included name of the affected SST file.
Issue: https://github.com/facebook/rocksdb/issues/12664
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12667
Reviewed By: ajkr
Differential Revision: D57464025
Pulled By: hx235
fbshipit-source-id: 12f2f2635e3092f8c29362aa132462492b5c1417
Summary:
rocksdb_batched_multi_get_cf has performance improvement than normal multi_get, however it needs a cf_handle arg, so add a C-API to get and destroy the default cf_handle, as many user only use the default cf.
Fixes https://github.com/facebook/rocksdb/issues/12316
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12514
Reviewed By: hx235
Differential Revision: D55922517
Pulled By: ajkr
fbshipit-source-id: c4cc4289f2cfd9efbb8f390a44a9d8d1ed08d9f0
Summary:
We plan to re-enable the test after fixing the test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12728
Test Plan: N/A. Disabling the test
Reviewed By: hx235
Differential Revision: D58071284
Pulled By: jaykorean
fbshipit-source-id: af6b45ec7654f9c7b40c36d3b59c7087e27a7af9
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12723
`CoalescingIterator` doesn't support `Refresh` currently; the patch adds a check that was missing from https://github.com/facebook/rocksdb/pull/12721 to disable this operation when multi-CF iterators are in use in the stress test.
Reviewed By: jaykorean
Differential Revision: D58053334
fbshipit-source-id: 3146f0e7e87230b49b244cecdfcee345c0ce78fa
Summary:
This PR adds a `DB::WriteWithCallback` API that does the same things as `DB::Write` while takes an argument `UserWriteCallback` to execute custom callback functions during the write.
We currently support two types of callback functions: `OnWriteEnqueued` and `OnWalWriteFinish`. The former is invoked after the write is enqueued, and the later is invoked after WAL write finishes when applicable.
These callback functions are intended for users to use to improve synchronization between concurrent writes, their execution is on the write's critical path so it will impact the write's latency if not used properly. The documentation for the callback interface mentioned this and suggest user to keep these callback functions' implementation minimum.
Although transaction interfaces' writes doesn't yet allow user to specify such a user write callback argument, the `DBImpl::Write*` type of APIs do not differentiate between regular DB writes or writes coming from the transaction layer when it comes to supporting this `UserWriteCallback`. These callbacks works for all the write modes including: default write mode, Options.two_write_queues, Options.unordered_write, Options.enable_pipelined_write
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12603
Test Plan: Added unit test in ./write_callback_test
Reviewed By: anand1976
Differential Revision: D58044638
Pulled By: jowlyzhang
fbshipit-source-id: 87a84a0221df8f589ec8fc4d74597e72ce97e4cd
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12717
The PR adds `Transaction::MultiGetEntity` to the stress tests. Similarly to what we do for `Transaction::MultiGet`, in this mode we open a transaction and randomly add writes for some of the queried keys to it while keeping track of the values written on a per-key basis. The results of `Transaction::MultiGetEntity` can then be validated against these expected values (in order to test the read-your-own-writes functionality) as well as the results returned by `Transaction::GetEntity` for the same keys.
Reviewed By: jaykorean
Differential Revision: D57990210
fbshipit-source-id: 9bf3bb292051c2c57757f86b517919197b03c524
Summary:
Introduce `use_multi_cf_iterator`, and when it's set, use `CoalescingIterator` in `TestIterate()`. Because all the column families contain the same data in today's Stress Test, we can compare `CoalescingIterator` against any `DBIter` from any of the column families. Currently, coalescing logic verification is done by unit tests, but we can extend the stress test to support different data in different column families in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12706
Test Plan:
```
python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --use_attribute_group=0 --use_put_entity_one_in=1 --use_multi_get=1 --use_multi_cf_iterator=1
```
**More PRs to come**
- Use `AttributeGroupIterator` when both `use_multi_cf_iterator` and `use_attribute_group` are true
- Support `Refresh()` in `CoalescingIterator`
- Extend Stress Test to support different data in different CFs (Long-term)
Reviewed By: ltamasi
Differential Revision: D58020247
Pulled By: jaykorean
fbshipit-source-id: 8e2483b85cf2bb0f5a9bb44851601bbf063484ec
Summary:
As titled. This PR also makes the interactive query tool more permissive by allowing the user to continue to try out a different command after the previous command received some allowed errors, such as `Status::NotFound`, `Status::InvalidArgument`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12716
Test Plan:
Manually tested:
```
yuzhangyu@yuzhangyu-mbp rocksdb % ./ldb --db=$TEST_DB --key_hex --value_hex query
get 0x0000000000000000 --read_timestamp=1115559245398440
0x0000000000000000|timestamp:1115559245398440 ==> 0x07000000000102030C0D0E0F08090A0B14151617101112131C1D1E1F18191A1B24252627202122232C2D2E2F28292A2B34353637303132333C3D3E3F38393A3B
put 0x0000000000000000 0x0000
put 0x0000000000000000 => 0x0000 failed: Invalid argument: cannot call this method on column family default that enables timestamp
put 0x0000000000000000 aha 0x0000
put gets invalid argument: Invalid argument: user provided timestamp is not a valid uint64 value.
put 0x0000000000000000 1115559245398441 0x08000000000102030C0D0E0F08090A0B14151617101112131C1D1E1F18191A1B24252627202122232C2D2E2F28292A2B34353637303132333C3D3E3F38393A3B
put 0x0000000000000000 write_ts: 1115559245398441 => 0x08000000000102030C0D0E0F08090A0B14151617101112131C1D1E1F18191A1B24252627202122232C2D2E2F28292A2B34353637303132333C3D3E3F38393A3B succeeded
delete 0x0000000000000000
delete 0x0000000000000000 failed: Invalid argument: cannot call this method on column family default that enables timestamp
delete 0x0000000000000000 1115559245398442
delete 0x0000000000000000 write_ts: 1115559245398442 succeeded
get 0x0000000000000000 --read_timestamp=1115559245398442
get 0x0000000000000000 read_timestamp: 1115559245398442 status: NotFound:
get 0x0000000000000000 --read_timestamp=1115559245398441
0x0000000000000000|timestamp:1115559245398441 ==> 0x08000000000102030C0D0E0F08090A0B14151617101112131C1D1E1F18191A1B24252627202122232C2D2E2F28292A2B34353637303132333C3D3E3F38393A3B
count --from=0x0000000000000000 --to=0x0000000000000001
scan from 0x0000000000000000 to 0x0000000000000001failed: Invalid argument: cannot call this method on column family default that enables timestamp
count --from=0x0000000000000000 --to=0x0000000000000001 --read_timestamp=1115559245398442
0
count --from=0x0000000000000000 --to=0x0000000000000001 --read_timestamp=1115559245398441
1
```
Reviewed By: ltamasi
Differential Revision: D57992183
Pulled By: jowlyzhang
fbshipit-source-id: 720525de22412d16aa952870e088f2c371459ece
Summary:
These functions were very similar and did not make sense for maintaining separately. This is not a pure refactor but I think bringing the behaviors closer together should reduce long term risk of unintentionally divergent behavior. This change is motivated by some forthcoming WAL handling fixes for Checkpoint and Backups.
* Sync() is always used on closed WALs, like the old SyncClosedWals. SyncWithoutFlush() is only used on the active (maybe) WAL. Perhaps SyncWithoutFlush() should be used whenever available, but I don't know which is preferred, as the previous state of the code was inconsistent.
* Syncing the WAL dir is selective based on need, like old SyncWAL, rather than done always like old SyncClosedLogs. This could be a performance improvement that was never applied to SyncClosedLogs but now is. We might still sync the dir more times than necessary in the case of parallel SyncWAL variants, but on a good FileSystem that's probably not too different performance-wise from us implementing something to have threads wait on each other.
Cosmetic changes:
* Rename internal function SyncClosedLogs to SyncClosedWals
* Merging the sync points into the common implementation between the two entry points isn't pretty, but should be fine.
Recommended follow-up:
* Clean up more confusing naming like log_dir_synced_
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12707
Test Plan: existing tests
Reviewed By: anand1976
Differential Revision: D57870856
Pulled By: pdillinger
fbshipit-source-id: 5455fba016d25dd5664fa41b253f18db2ca8919a
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12715
The patch refactors/deduplicates the non-attribute-group and attribute-group code paths in `NonBatchedOpsStressTest::TestMultiGetEntity` by introducing two new generic lambdas `verify_expected_errors` and `check_results` (the latter of which subsumes the existing `handle_results`) that can handle both types of APIs. This change also serves as groundwork for the upcoming transactional `MultiGetEntity` stress tests.
Reviewed By: jaykorean
Differential Revision: D57977700
fbshipit-source-id: 83a18a9e57f46ea92ba07b2f0dca3e9bc353f257
Summary:
A `BlockBasedTable` with `TieredSecondaryCache` containing a NVM cache inserts blocks into the compressed cache and the corresponding compressed block into the NVM cache. The `BlockFetcher` is used to get the uncompressed and compressed blocks by calling `ReadBlockContents()` and `GetUncompressedBlock()` respectively. If the file system supports FSBuffer (i.e returning a FS allocated buffer rather than caller provided), that buffer gets freed between the two calls. This PR fixes it by making the FSBuffer unique pointer a member rather than local variable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12712
Test Plan:
1. Add a unit test
2. Release validation stress test
Reviewed By: jaykorean
Differential Revision: D57974026
Pulled By: anand1976
fbshipit-source-id: cfa895914e74b4f628413b40e6e39d8d8e5286bd
Summary:
We tested on icelake server (vcpu=160). The default configuration is allow_concurrent_memtable_write=1, thread number =activate core number. With our optimizations, the improvement can reach up to 184% in fillseq case. op/s is as the performance indicator in db_bench, and the following are performance improvements in some cases in db_bench.
| case name | optimized/original |
|-------------------:|--------------------:|
| fillrandom | 182% |
| fillseq | 184% |
| fillsync | 136% |
| overwrite | 179% |
| randomreplacekeys | 180% |
| randomtransaction | 161% |
| updaterandom | 163% |
| xorupdaterandom | 165% |
With analysis, we find that although the process of writing memtable is processed in parallel, the process of waking up the writers is not processed in parallel, which means that only one writers is responsible for the sequential waking up other writers. The following is our method to optimize this process.
Assume that there are currently n threads in total, we parallelize SetState in LaunchParallelMemTableWriters. To wake up each writer to write its own memtable, the leader writer first wakes up the (n^0.5-1) caller writers, and then those callers and the leader will wake up n/x separately to write to the memtable. This reduces the number for the leader's to SetState n-1 writers to 2*(n^0.5) writers in turn.
A reproduction script:
./db_bench --benchmarks="fillrandom" --threads ${number of all activate vcpu} --seed 1708494134896523 --duration 60
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12545
Reviewed By: ajkr
Differential Revision: D57422827
Pulled By: cbi42
fbshipit-source-id: 94127937c0c61e4241720bd902c82c607b7b2431
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12711
The patch adds the missing other half of https://github.com/facebook/rocksdb/pull/12709: when there is no locking in a read test, we have to be more permissive when it comes to values returned by queries. In particular, any expected state value in a small window around the read call should be allowed, and discrepancies in the presence/absence of a key should only be treated as a failure if the key is guaranteed to have not existed/existed during the above window.
Reviewed By: hx235
Differential Revision: D57938678
fbshipit-source-id: cd5c8bc2e014ec12ea4daf441965f3ec2115663e
Summary:
https://github.com/facebook/rocksdb/issues/12512 added the sanity check for this incompatible combination. However, it does the check during memtable insertion which can turn the DB into read-only mode. This PR moves the check earlier so that this write failure will not turn the DB into read-only mode and affect other DB operations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12710
Test Plan: * updated unit test `DBRangeDelTest.RowCache` to write to DB after a failed DeleteRange(). The test fails before this PR.
Reviewed By: ajkr
Differential Revision: D57925188
Pulled By: cbi42
fbshipit-source-id: 8bf001bd3fcf05635411ba28bc4a037321942879
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12709
This is most likely copypasta from `TestGet` from before https://github.com/facebook/rocksdb/pull/11058 . There is no need to lock the mutex for the key for reads; in fact, doing so is detrimental to test coverage since it locks out concurrent writers.
Reviewed By: jowlyzhang
Differential Revision: D57915207
fbshipit-source-id: eb0dbf6b84e5408b87d96dd47597511996e206a7
Summary:
Add the `--leader_path` option to specify the directory path of the leader for a follower RocksDB instance. This PR also adds a `count` command to the repl shell. While not specific to followers, it is useful for testing purposes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12682
Reviewed By: jowlyzhang
Differential Revision: D57642296
Pulled By: anand1976
fbshipit-source-id: 53767d496ecadc363ff92cd958b8e15a7bf3b151
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12699
The patch adds `PutEntity` to the potential write operations used in the read-your-own-writes tests for `Transaction::MultiGet`. Note that since the stress test generates wide-column structures which have the value returned by `GenerateValue` in the default column, this does not affect the results returned by the `MultiGet` API (unless we have a bug).
The wide-column entity is generated according to the usual rules based on the value base and the `use_put_entity_one_in` flag. The entire entity structure will be validated by the upcoming stress test for `Transaction::MultiGetEntity`, where we also plan to leverage this logic.
Reviewed By: jowlyzhang
Differential Revision: D57799075
fbshipit-source-id: 5f86c2b2b3ceee8e1b8bf7453c02f1f1b1b00751
Summary:
**Context/Summary:**
the flag --json of manifest_dump in ldb tool has no effect
The bug may be introduced by pr https://github.com/facebook/rocksdb/pull/8378
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12703
Reviewed By: cbi42
Differential Revision: D57848094
Pulled By: ajkr
fbshipit-source-id: 3d1ce65528bf4ce9c53593a7208406ab90e8994b
Summary:
This PR adds UpdateTimestamp API of WriteBatch and WBWI, create WB, WBWI with all options and Iterator Refresh in C API
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10529
Reviewed By: cbi42
Differential Revision: D57826913
Pulled By: ajkr
fbshipit-source-id: d2ec840129f61a1d3a5a12e859728be98ebbad2f
Summary:
This change replaces the use of `std::unique_ptr` with `std::optional` for conditionally constructing a `ReadLock` object. The read lock object was recently introduced in PR https://github.com/facebook/rocksdb/issues/12624. This change makes the code more concise and clarifies that the lock is not meant to be transferred (as `std::unique_ptr` is movable). It also avoids a heap allocation.
There are no functional changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12704
Reviewed By: cbi42
Differential Revision: D57848192
Pulled By: ajkr
fbshipit-source-id: da48c77aac33b51ba5dcc238f98fc48ccf234a21
Summary:
These names are confusing with `Logger` etc. so moving to `WalFile` etc.
Other small, related name refactorings.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12695
Test Plan: Left most unit tests using old names as an API compatibility test. Non-test code compiles with deprecated names removed. No functional changes.
Reviewed By: ajkr
Differential Revision: D57747458
Pulled By: pdillinger
fbshipit-source-id: 7b77596b9c20d865d43b9dc66c30c8bd2b3b424f
Summary:
It should be no less than `level0_file_num_compaction_trigger`(which defaults to 4) when set to a positive value. Otherwise DB open will fail.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12701
Test Plan: crash test not failing DB open due to this option value.
Reviewed By: ajkr
Differential Revision: D57825062
Pulled By: cbi42
fbshipit-source-id: 22d8e12aeceb5cef815157845995a8448552e2d2
Summary:
we are converting the implicit loads to explicit loads, then remove the hidden loads in fbcode macroes.
details see https://fb.workplace.com/groups/devx.build.bffs/permalink/7481848805183560/
Reviewed By: JakobDegen
Differential Revision: D57800976
fbshipit-source-id: a893aa2aa9237704ba9eb998cba210222c95dd2f
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12697
As groundwork for stress testing `Transaction::MultiGetEntity`, the patch factors out the logic for adding transactional writes for some of the keys in a `MultiGet` batch into a separate helper method called `MaybeAddKeyToTxnForRYW`.
Reviewed By: jowlyzhang
Differential Revision: D57791830
fbshipit-source-id: ef347ba6e6e82dfe5cedb4cf67dd6d1503901d89
Summary:
As titled. For dumping wal files, since a mapping from column family id to the user comparator object is needed to print the timestamp in human readable format, option `[--db=<db_path>]` is added to `dump_wal` command to allow the user to choose to optionally open the DB as read only instance and dump the wal file with better timestamp formatting.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12690
Test Plan:
Manually tested
dump_wal:
[dump a wal file specified with --walfile]
```
>> ./ldb --walfile=$TEST_DB/000004.log dump_wal --print_value
>>1,1,28,13,PUT(0) : 0x666F6F0100000000000000 : 0x7631
(Column family id: [0] contained in WAL are not opened in DB. Applied default hex formatting for user key. Specify --db=<db_path> to open DB for better user key formatting if it contains timestamp.)
```
[dump with --db specified for better timestamp formatting]
```
>> ./ldb --walfile=$TEST_DB/000004.log dump_wal --db=$TEST_DB --print_value
>> 1,1,28,13,PUT(0) : 0x666F6F|timestamp:1 : 0x7631
```
dump:
[dump a file specified with --path]
```
>>./ldb --path=/tmp/rocksdbtest-501/column_family_test_75359_17910784957761284041/000004.log dump
Sequence,Count,ByteSize,Physical Offset,Key(s) : value
1,1,28,13,PUT(0) : 0x666F6F0100000000000000 : 0x7631
(Column family id: [0] contained in WAL are not opened in DB. Applied default hex formatting for user key. Specify --db=<db_path> to open DB for better user key formatting if it contains timestamp.)
```
[dump db specified with --db]
```
>> ./ldb --db=/tmp/rocksdbtest-501/column_family_test_75359_17910784957761284041 dump
>> foo|timestamp:1 ==> v1
Keys in range: 1
```
idump
```
./ldb --db=$TEST_DB idump
'foo|timestamp:1' seq:1, type:1 => v1
Internal keys in range: 1
```
Reviewed By: ltamasi
Differential Revision: D57755382
Pulled By: jowlyzhang
fbshipit-source-id: a0a2ef80c92801cbf7bfccc64769c1191824362e
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12696
Two fixes:
1) `Random::Uniform(n)` returns an integer from the interval [0, n - 1], so `Uniform(2)` returns 0 or 1, which means is that we have apparently never covered transactions with deletions in the test. (To prevent similar issues, the patch cleans this write logic up a bit using an `enum class` for the type of write.)
2) The keys passed in to `TestMultiGet` can have duplicates. What this boils down to is that we have to keep track of the latest expected values for read-your-own-writes on a per-key basis.
Reviewed By: jowlyzhang
Differential Revision: D57750212
fbshipit-source-id: e8ab603252c32331f8db0dfb2affcca1e188c790
Summary:
I think the point of the `if (end_of_buffer_offset_ - buffer_.size() == 0)` was to only set `recycled_` when the first record was read. However, the condition was false when reading the first record when the WAL began with a `kSetCompressionType` record because we had already dropped the `kSetCompressionType` record from `buffer_`. To fix this, I used `first_record_read_` instead.
Also, it was pretty confusing to treat the WAL as non-recycled when a recyclable record first appeared in a non-first record. I changed it to return an error if that happens.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12643
Reviewed By: hx235
Differential Revision: D57238099
Pulled By: ajkr
fbshipit-source-id: e20a2a0c9cf0c9510a7b6af463650a05d559239e
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12688
As a first step of covering the wide-column transaction APIs, the patch adds `PutEntity` to the optimistic and pessimistic transaction stress tests (for the latter, only when the WriteCommitted policy is utilized). Other APIs and the multi-operation transaction test will be covered by subsequent PRs.
Reviewed By: jaykorean
Differential Revision: D57675781
fbshipit-source-id: bfe062ec5f6ab48641cd99a70f239ce4aa39299c
Summary:
**Context/Summary:** https://github.com/facebook/rocksdb/pull/12556 `avoid_sync_during_shutdown=false` missed an edge case where `manual_wal_flush == true` so WAL sync will still miss unflushed WAL. This PR fixes it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12684
Test Plan: modified UT to include this case `manual_wal_flush==true`
Reviewed By: cbi42
Differential Revision: D57655861
Pulled By: hx235
fbshipit-source-id: c9f49fe260e8b38b3ea387558432dcd9a3dbec19
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12689
These should be in `snake_case` (not `camelCase`) per our style guide.
Reviewed By: jowlyzhang
Differential Revision: D57676418
fbshipit-source-id: 82ad6a87d1540f0b29c2f864ca0128287fe95a9e
Summary:
`-Wextra-semi` or `-Wextra-semi-stmt`
If the code compiles, this is safe to land.
Reviewed By: palmje
Differential Revision: D57632757
fbshipit-source-id: 1dbad2a2e185381e225df8b9027033e06aeaf01b
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12683
With optimistic transactions, the stress test parameter `txn_write_policy` is not applicable and is thus not set. When the parameter is subsequently checked, Python's dictionary `get` method returns `None`, which is not equal to zero. The net result of this is that currently, `sync_fault_injection` and `manual_wal_flush_one_in` are always disabled in optimistic transaction mode (most likely unintentionally).
Reviewed By: cbi42
Differential Revision: D57655339
fbshipit-source-id: 8b93a788f9b02307b6ea7b2129dc012271130334
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12681
When rebuilding transactions during recovery, `MemtableInserter::PutCFImpl` currently calls `WriteBatchInternal::Put` regardless of value type, which is incorrect for `PutEntity` entries, as well as `TimedPut`s and the blob indexes used by the old BlobDB implementation. The patch fixes the handling of `PutEntity` and returns `NotSupported` for `TimedPut`s and blob indices.
Reviewed By: jaykorean, jowlyzhang
Differential Revision: D57636355
fbshipit-source-id: 833de4e4aa0b42ff6638b72c4181f981d12d0f15
Summary:
We recently noticed that some memtable flushed and file
ingestions could proceed during LockWAL, in violation of its stated
contract. (Note: we aren't 100% sure its actually needed by MySQL, but
we want it to be in a clean state nonetheless.)
Despite earlier skepticism that this could be done safely (https://github.com/facebook/rocksdb/issues/12666), I
found a place to wait to wait for LockWAL to be cleared before allowing
these operations to proceed: WaitForPendingWrites()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12652
Test Plan:
Added to unit tests. Extended how db_stress validates LockWAL
and re-enabled combination of ingestion and LockWAL in crash test, in
follow-up to https://github.com/facebook/rocksdb/issues/12642
Ran blackbox_crash_test for a long while with relevant features
amplified.
Suggested follow-up: fix FaultInjectionTestFS to report file sizes
consistent with what the user has requested to be flushed.
Reviewed By: jowlyzhang
Differential Revision: D57622142
Pulled By: pdillinger
fbshipit-source-id: aef265fce69465618974b4ec47f4636257c676ce
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12677
The patch contains two fixes related to printing `PutEntity` records with `ldb dump_wal`:
1) It adds the key to the printout (it was missing earlier).
2) It restores the formatting flags of the output stream after dumping the wide-column structure so that any `hex` flag that might have been set does not affect subsequent printing of e.g. sequence numbers.
Reviewed By: jaykorean, jowlyzhang
Differential Revision: D57591295
fbshipit-source-id: af4e3e219f0082ad39bbdfd26f8c5a57ebb898be
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12676
The patch extends the RocksDB buckifier script so it also creates a `buck` target for the `ldb` tool and updates the `TARGETS` file with the results of the new version of the script.
Reviewed By: cbi42
Differential Revision: D57588789
fbshipit-source-id: 2ed58b405b3f216e802cf6bcbdbf9809e7386c8b
Summary:
the value of `inplace_update_support` option need to be fixed across runs of db_stress on the same DB (https://github.com/facebook/rocksdb/issues/12577). My recent fix (https://github.com/facebook/rocksdb/issues/12673) regressed this behavior. Also fix some existing places where this does not hold.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12675
Test Plan: monitor crash tests related to `inplace_update_support`.
Reviewed By: hx235
Differential Revision: D57576375
Pulled By: cbi42
fbshipit-source-id: 75b1bd233f03e5657984f5d5234dbbb1ffc35c27
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12668
The patch adds a new `GetEntityForUpdate` API to optimistic and WriteCommitted pessimistic transactions, which provides transactional wide-column point lookup functionality with concurrency control. For WriteCommitted transactions, user-defined timestamps are also supported similarly to the `GetForUpdate` API.
Reviewed By: jaykorean
Differential Revision: D57458304
fbshipit-source-id: 7eadbac531ca5446353e494abbd0635d63f62d24
Summary:
gcc 14.1 reports some warnings about dangling-reference occured in backup_engine_test.
```c++
/data/rocksdb/utilities/backup/backup_engine_test.cc: In member function 'virtual void rocksdb::{anonymous}::BackupEngineTest_ExcludeFiles_Test::TestBody()':
/data/rocksdb/utilities/backup/backup_engine_test.cc:4411:64: error: possibly dangling reference to a temporary [-Werror=dangling-reference]
4411 | std::make_pair(alt_backup_engine, backup_engine_.get())}) {
| ^
/data/rocksdb/utilities/backup/backup_engine_test.cc:4410:23: note: the temporary was destroyed at the end of the full expression 'std::make_pair<rocksdb::BackupEngine*, rocksdb::BackupEngine*&>(((rocksdb::{anonymous}::BackupEngineTest_ExcludeFiles_Test*)this)->rocksdb::{anonymous}::BackupEngineTest_ExcludeFiles_Test::rocksdb::{anonymous}::BackupEngineTest.rocksdb::{anonymous}::BackupEngineTest::backup_engine_.std::unique_ptr<rocksdb::BackupEngine>::get(), alt_backup_engine)'
4410 | {std::make_pair(backup_engine_.get(), alt_backup_engine),
| ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/data/rocksdb/utilities/backup/backup_engine_test.cc:4411:64: error: possibly dangling reference to a temporary [-Werror=dangling-reference]
4411 | std::make_pair(alt_backup_engine, backup_engine_.get())}) {
| ^
/data/rocksdb/utilities/backup/backup_engine_test.cc:4411:23: note: the temporary was destroyed at the end of the full expression 'std::make_pair<rocksdb::BackupEngine*&, rocksdb::BackupEngine*>(alt_backup_engine, ((rocksdb::{anonymous}::BackupEngineTest_ExcludeFiles_Test*)this)->rocksdb::{anonymous}::BackupEngineTest_ExcludeFiles_Test::rocksdb::{anonymous}::BackupEngineTest.rocksdb::{anonymous}::BackupEngineTest::backup_engine_.std::unique_ptr<rocksdb::BackupEngine>::get())'
4411 | std::make_pair(alt_backup_engine, backup_engine_.get())}) {
| ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
It seems to be related to this update in gcc:
https://gcc.gnu.org/gcc-14/changes.html#:~:text=%2DWdangling%2Dreference%20false%20positives%20have%20been%20reduced.%20The%20warning%20does%20not%20warn%20about%20std%3A%3Aspan%2Dlike%20classes%3B%20there%20is%20also%20a%20new%20attribute%20gnu%3A%3Ano_dangling%20to%20suppress%20the%20warning.%20See%20the%20manual%20for%20more%20info.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12637
Reviewed By: cbi42
Differential Revision: D57263996
Pulled By: ajkr
fbshipit-source-id: 1e416c38240d3d1adda787fc484c0392e28bb7f1
Summary:
With unsynced data loss, we replay traces to recover expected state to DB's latest sequence number. With `inplace_update_support`, the largest sequence number of memtable may not reflect the latest update. This is because inplace updates in memtable do not update sequence number. So we disable `inplace_update_support` where traces need to be replayed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12673
Reviewed By: ltamasi
Differential Revision: D57512548
Pulled By: cbi42
fbshipit-source-id: 69278fe2e935874faf744d0ac4fd85263773c3ec
Summary:
This PR implements deletion of obsolete files in a follower RocksDB instance. The follower tails the leader's MANIFEST and creates links to newly added SST files. These links need to be deleted once those files become obsolete in order to reclaim space. There are three cases to be considered -
1. New files added and links created, but the Version could not be installed due to some missing files. Those links need to be preserved so a subsequent catch up attempt can succeed. We insert the next file number in the `VersionSet` to `pending_outputs_` to prevent their deletion.
2. Files deleted from the previous successfully installed `Version`. These are deleted as usual in `PurgeObsoleteFiles`.
3. New files added by a `VersionEdit` and deleted by a subsequent `VersionEdit`, both processed in the same catchup attempt. Links will be created for the new files when verifying a candidate `Version`. Those need to be deleted explicitly as they're never added to `VersionStorageInfo`, and thus not deleted by `PurgeObsoleteFiles`.
Test plan -
New unit tests in `db_follower_test`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12657
Reviewed By: jowlyzhang
Differential Revision: D57462697
Pulled By: anand1976
fbshipit-source-id: 898f15570638dd4930f839ffd31c560f9cb73916
Summary:
This test is flaky and a recent failure prints the following:
```
[ RUN ] DBTestWithParam/DBTestWithParam.ThreadStatusSingleCompaction/0
thread id: 1842811, thread status:
thread id: 1842803, thread status:
db/db_test.cc:4697: Failure
Expected equality of these values:
op_count
Which is: 0
expected_count
Which is: 1
[ FAILED ] DBTestWithParam/DBTestWithParam.ThreadStatusSingleCompaction/0, where GetParam() = (1, false) (307 ms)
```
Empty thread status implies that operation_type of the threads are all OP_UNKNOWN. From https://github.com/facebook/rocksdb/blob/3ed46e0668f840bea490e29beeac7777c50ae8fb/monitoring/thread_status_updater.cc#L197, this can be due to thread_data->operation_type being OP_UNKNOWN or that thread_data->cf_key it not in `cf_info_map_`, potentially due to how cf_key_ is accessed with relaxed memory order. This PR adds some debug print to print the cf_name to check this.
This PR also prints num_running_compaction and lsm state to check if a compaction is indeed running, and removes some not needed options and ensures that exactly 4 L0 files are created.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12661
Test Plan:
- Cannot repro the failure locally: `gtest-parallel --repeat=10000 --workers=200 ./db_test --gtest_filter="*ThreadStatusSingleCompaction*"`
- New failure message will look like:
```
[ RUN ] DBTestWithParam/DBTestWithParam.ThreadStatusSingleCompaction/0
op_count: 1, expected_count 2
thread id: 6104100864, thread status: , cf_name
thread id: 6103527424, thread status: Compaction, cf_name default
running compaction: 1 lsm state: 4
db/db_test.cc:4885: Failure
Value of: match
Actual: false
Expected: true
[ FAILED ] DBTestWithParam/DBTestWithParam.ThreadStatusSingleCompaction/0, where GetParam() = (1, false) (115 ms)
```
Reviewed By: hx235
Differential Revision: D57422755
Pulled By: cbi42
fbshipit-source-id: 635663f26052b20e485dfa06a7c0f1f318ac1099
Summary:
Represent internal kTypeValuePreferredSeqno in the public API as kEntryTimedPut (because it is created by TimedPut, until the entry can be safely converted to a regular value entry in compaction)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12669
Test Plan: for follow-up work actually using it. But putting this in place in the public API gives us more flexibility in rolling out that follow-up work (e.g. as a user extension or patch if needed).
Reviewed By: jowlyzhang
Differential Revision: D57459637
Pulled By: pdillinger
fbshipit-source-id: 160ccf7c4e524ee479558846b2a207d51b8b3d9c
Summary:
`ReadOptions::pin_data` already has the effect of pinning the `Slice` returned by `Iterator::value()` when the value is stored inline (e.g., `kTypeValue`). This PR adds a bit of visibility into that via a new `Iterator` property, "rocksdb.iterator.is-value-pinned", as well as some documentation and tests.
See also: https://github.com/facebook/rocksdb/issues/12658
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12659
Reviewed By: cbi42
Differential Revision: D57391200
Pulled By: ajkr
fbshipit-source-id: 0caa8db27ca1aba86ee2addc3dfd6f0e003d32e2
Summary:
To avoid use-after-free on custom env on ASSERT_WHATEVER failure.
This is motivated by a rare crash seen in DBErrorHandlingFSTest.WALWriteError (VersionSet::GetObsoleteFiles in a SstFileManagerImpl::ClearError thread) and wanting to rule out this being related to that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12655
Test Plan: manually seeing ASSERT_WHATEVER failures, especially under ASAN
Reviewed By: cbi42
Differential Revision: D57358202
Pulled By: pdillinger
fbshipit-source-id: 4da2a0d73a54380b257e5cc1ab6c666e26b83973
Summary:
If timestamp size record doesn't fit into a block, without padding `Writer::EmitPhysicalRecord` fails on assert (either `assert(block_offset_ + kHeaderSize + n <= kBlockSize);` or `assert(block_offset_ + kRecyclableHeaderSize + n <= kBlockSize)`, depending on whether recycling log files is enabled) in debug build. In release, current block grows beyond 32K, `block_offset_` gets reset on next `AddRecord` and all the subsequent blocks are no longer aligned by block size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12614
Reviewed By: ltamasi
Differential Revision: D57302140
Pulled By: jowlyzhang
fbshipit-source-id: cacb5cefb7586885e52a8137ae23a95e1aefca2d
Summary:
As titled. A proper fix should probably be failing file ingestion if the DB is in a lock wal state as it promises to "Freezes the logical state of the DB".
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12642
Reviewed By: pdillinger
Differential Revision: D57235869
Pulled By: jowlyzhang
fbshipit-source-id: c70031463842220f865621eb6f53424df27d29e9
Summary:
**Context/Summary:**
Previously `CompactFiles()` used `RangeOverlapWithCompaction()` to check for conflict when sanitizing input files while later used `FilesRangeOverlapWithCompaction()` to assert for no conflict. The latter function checks for more conflict scenarios than the former does, particularly the ones arising from `preclude_last_level_data_seconds > 0` (i.e, compaction can output to second-to-the-last level). So we ran into assertion violation in `CompactFiles()` like below
```
Assertion `output_level == 0 || !FilesRangeOverlapWithCompaction( input_files, output_level, Compaction::EvaluatePenultimateLevel(vstorage, ioptions_, start_level, output_level))' failed.
```
This PR make `CompactFiles()` used `FilesRangeOverlapWithCompaction()` and return Aborted status upon range conflict instead of crashing (during debug build) or proceed incorrectly (during non-debug build). To do so cleanly, I included a refactoring to make `FilesRangeOverlapWithCompaction()` part of `SanitizeAndConvertCompactionInputFiles()`, replacing `RangeOverlapWithCompaction()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12628
Test Plan: New UT crashed before the fix and return correct status after the fix.
Reviewed By: cbi42
Differential Revision: D57123536
Pulled By: hx235
fbshipit-source-id: f963a2c9e7ba1a9927a67fcc87f0dce126d3a430
Summary:
Seeing way too many errors likely related to PromoteL0 from https://github.com/facebook/rocksdb/issues/12617, containing
```
Cannot delete table file #N from level 0 since it is on level X
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12651
Test Plan: watch crash test results
Reviewed By: hx235
Differential Revision: D57286208
Pulled By: pdillinger
fbshipit-source-id: f7f0560cc0804ca297373c8d20ebc34986cc19d0
Summary:
Follow-up from https://github.com/facebook/rocksdb/issues/12403
The crash test was periodically failing with the
"disableWAL option is not supported if recycle_log_file_num > 0" failure, despite not setting the disableWAL from the user side.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12639
Test Plan: db_stress reproducer now passes. Added WAL recycling to txn DB unit tests, which is generally more difficult for correctness. Many tests now cover this change and pass.
Reviewed By: anand1976
Differential Revision: D57227617
Pulled By: pdillinger
fbshipit-source-id: db9abefeb505bce624b45bc64009694d2a5baed9
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12634
The patch implements support for the `MultiGetEntity` API in optimistic transactions and pessimistic transactions with the WriteCommitted policy. Similarly to the other wide-column transaction APIs, the implementation leverages the `WriteBatchWithIndex` layer.
Reviewed By: jaykorean
Differential Revision: D57177638
fbshipit-source-id: 2d9f9f287fc97e7c126830b48d21457c7c35db3f
Summary:
Adding AttributeGroup APIs in stress test. This contains the following changes only. More PRs to follow.
- Introduce `use_attribute_group` flag
- AttributeGroup `PutEntity()` and `GetEntity()` are now used per `use_attribute_group` flag in BatchOps, NonBatchOps and CfConsistency tests
In the next PRs I plan to add
- AttributeGroup `MultiGetEntity()` in Stress Test
- AttributeGroupIterator in Stress Test (along with CoalescingIterator)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12605
Test Plan:
NonBatchOps
```
python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --use_attribute_group=1 --use_put_entity_one_in=1
```
BatchOps
```
python3 tools/db_crashtest.py blackbox --test_batches_snapshots=1 --max_key=25000000 --write_buffer_size=4194304 --use_attribute_group=1 --use_put_entity_one_in=1
```
CfConsistency Test
```
python3 tools/db_crashtest.py blackbox --cf_consistency --max_key=25000000 --write_buffer_size=4194304 --use_attribute_group=1 --use_put_entity_one_in=1
```
Reviewed By: ltamasi
Differential Revision: D56916768
Pulled By: jaykorean
fbshipit-source-id: 8555d9e0d05927740a10e4e8301e44beec59a6f5
Summary:
**Context/Summary:**
As titled. Bonus: found that PromoteL0 called with other concurrent PromoteL0 will return non-okay error so clarify the API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12617
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D56954428
Pulled By: hx235
fbshipit-source-id: 0e056153c515003fd241ffec59b0d8a27529db4c
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12630
The patch cleans up, improves, and brings into sync (to the extent possible without API signature changes) the sanity checks around the `GetEntity` / `MultiGetEntity` family of APIs, including the read-your-own-writes (`WriteBatchWithIndex`) and transaction layers. The checks are centralized in two main sets of entry points, namely in `DB(Impl)` and the "main" `GetEntityFromBatchAndDB` / `MultiGetEntityFromBatchAndDB` overloads in `WriteBatchWithIndex`. This eliminates the need to duplicate the checks in the transaction classes.
Reviewed By: jaykorean
Differential Revision: D57125741
fbshipit-source-id: 4dd059ef644a9b173fbba767538943397e4cc6cd
Summary:
The state of `saved_seq_for_penul_check_` is not correctly maintained with the current flow. It's supposed to store the original sequence number for a `kTypeValuePreferredSeqno` entry for use in the `DecideOutputLevel` function. However, it's not always properly cleared.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12626
Test Plan:
Added unit test that would fail before the fix
./tiered_compaction_test --gtest_filter="*InterleavedTimedPutAndPut*"
Reviewed By: pdillinger
Differential Revision: D57123469
Pulled By: jowlyzhang
fbshipit-source-id: 8d73214b3b6dc152daf19b6bd6ee9063581dc277
Summary:
After https://github.com/facebook/rocksdb/issues/12624 seeing db_stress failures due to db_crashtest.py calling it with --prefixpercent=5 --enable_compaction_filter=1
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12627
Test Plan: watch crash test
Reviewed By: ajkr
Differential Revision: D57121592
Pulled By: pdillinger
fbshipit-source-id: 55727355a7662e67efcd22d7e353153e78e24f59
Summary:
In `SaveValue()`, the read lock needs to be obtained before `VerifyEntryChecksum()` because the KV checksum verification reads the entire value metadata+data, which is all mutable when `ColumnFamilyOptions::inplace_update_support == true`.
In `MemTable::Update()`, the write lock needs to be obtained before mutating the value metadata (changing the value size) because it can be read concurrently.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12624
Test Plan:
```
$ make COMPILE_WITH_TSAN=1 -j56 db_stress
...
$ python3 tools/db_crashtest.py blackbox --simple --max_key=10 --inplace_update_support=1 --interval=10 --allow_concurrent_memtable_write=0
```
Reviewed By: cbi42
Differential Revision: D57034571
Pulled By: ajkr
fbshipit-source-id: 3dddf881ad87923143acdf6bfec12ce47bb13a48
Summary:
For manual compaction, FIFO compaction will always skip key range overlapping checking with SST files. If CompactRange() is called with CompactionRangeOptions::change_level=true, a CF with FIFO compaction will now return Status::NotSupported.
For file ingestion, we will always ingest into L0. Previously, it's possible to ingest files into non-L0 levels with FIFO compaction.
These changes also help to fix [this](https://github.com/facebook/rocksdb/blob/a178d15bafae1c9ea51f19691b2d1fb9dd3b6a3f/db/db_impl/db_impl_compaction_flush.cc#L1269) assertion failure in crash tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12618
Test Plan: added unit tests to verify the new behavior.
Reviewed By: hx235
Differential Revision: D56962401
Pulled By: cbi42
fbshipit-source-id: 19812a1509650b4162b379ca5bee02f2e9d9569d
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12623
The PR adds support for the `GetEntity` API to optimistic and WriteCommitted pessimistic transactions. `MultiGetEntity` support and the `ForUpdate` variants of these read APIs will be implemented in subsequent PRs.
Reviewed By: jaykorean
Differential Revision: D57030879
fbshipit-source-id: 1f0aed6418782975fe537b6b3d437fad31fcbd43
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12606
The patch extends optimistic transactions and WriteCommitted pessimistic transactions with support for the `PutEntity` API. Similarly to the other APIs, `PutEntity` is available via both the `Transaction` and `TransactionDB` interfaces, where using the latter executes the write in a single-operation transaction as usual. Support for read APIs and other write policies (WritePrepared, WriteUnprepared) will be added in separate PRs.
Reviewed By: jaykorean
Differential Revision: D56911242
fbshipit-source-id: 57cf8bb6c6b1b40ba4a8a652831c13a617644289
Summary:
Previously we skipped syncing the non-latest WALs during memtable flush when the DB had only one column family. Normally that is fine because those non-latest WALs would not be read by recovery. However, in case of `DBOptions::allow_2pc == true`, there could be unmatched prepare records in those WALs making them needed by recovery. As a result, the missing sync could have resulted in the recovered WAL state falling behind the recovered SST state. When we detect that case, we return a `Status::Corruption` saying "SST file is ahead of WALs".
This PR proposes syncing the WAL in case of `DBOptions::allow_2pc`. This introduces the sync in some scenarios where it isn't needed (e.g., non-recent WALs contain no prepares) but I suspect the simplicity is worth it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12622
Reviewed By: cbi42
Differential Revision: D56987303
Pulled By: ajkr
fbshipit-source-id: 7fe9395458018a18d77e907a3b5429065c0e2e48
Summary:
when importing files from multiple CFs into a new CF, we were reusing the epoch numbers assigned by the original CFs. This means L0 files in the new CF can have the same epoch number (assigned originally by different CFs). While CreateColumnFamilyWithImport() requires each original CF to have disjoint key range, after an intra-l0 compaction, we still can end up with L0 files with the same epoch number but overlapping key range. This PR attempt to fix this by reassigning epoch numbers when importing multiple CFs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12602
Test Plan:
a new repro unit test. Before this PR, it fails with
```
[ RUN ] ImportColumnFamilyTest.AssignEpochNumberToMultipleCF
db/import_column_family_test.cc:1048: Failure
db_->WaitForCompact(o)
Corruption: force_consistency_checks(DEBUG): VersionBuilder: L0 files of same epoch number but overlapping range https://github.com/facebook/rocksdb/issues/44 , smallest key: '6B6579303030303030' seq:511, type:1 , largest key: '6B6579303031303239' seq:510, type:1 , epoch number: 3 vs. file https://github.com/facebook/rocksdb/issues/36 , smallest key: '6B6579303030313030' seq:401, type:1 , largest key: '6B6579303030313939' seq:500, type:1 , epoch number: 3
```
Reviewed By: hx235
Differential Revision: D56851808
Pulled By: cbi42
fbshipit-source-id: 01b8c790c9f1f2a168047ead670e73633f705b84
Summary:
This PR fixes a bug in the StderrLogger that truncated the last character in the logline. The problem was that we provided an incorrect max size parameter into the vsnprintf function. The size didn't take into account the null byte that the function automatically adds.
Before fix
```
** File Read Latency Histogram By Level [default] **
2024/05/04-18:50:24.209304 4788 [/db_impl/db_impl.cc:498] Shutdown: canceling all background wor
2024/05/04-18:50:24.209598 4788 [/db_impl/db_impl.cc:692] Shutdown complet
```
After fix
```
** File Read Latency Histogram By Level [default] **
2024/05/04-18:51:19.814584 4d4d [/db_impl/db_impl.cc:498] Shutdown: canceling all background work
2024/05/04-18:51:19.815528 4d4d [/db_impl/db_impl.cc:692] Shutdown complete
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12620
Test Plan:
tested on examples/simple_example.cc with StderrLogger
Fixes: https://github.com/facebook/rocksdb/issues/12576
Reviewed By: jaykorean
Differential Revision: D56972332
Pulled By: ajkr
fbshipit-source-id: 70405e8231ae6e90d24fe0b351bc8e749176bd15
Summary:
Our external benchmark attributed a CPU regression to https://github.com/facebook/rocksdb/issues/11860. Based on the CPU profile the new overhead is from `std::deque`. The deque is always empty for these scans so we do not need to construct it. This PR lazily constructs it only when it is needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12616
Test Plan:
- Command: `TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=filluniquerandom,seekrandom[-X10] -compression_type=none -disable_auto_compactions=true -write_buffer_size=524288 -value_size=1024 -num=10000 -reads=100000`
- Results
- Before this PR: `seekrandom [AVG 10 runs] : 47811 (± 431) ops/sec`
- After this PR: `seekrandom [AVG 10 runs] : 51013 (± 632) ops/sec`
Reviewed By: jaykorean
Differential Revision: D56954136
Pulled By: ajkr
fbshipit-source-id: b4d34c9b6c6c2e83d4fff06deacb9f0df2ad042f
Summary:
We've seen an internal crash test+sanitizer failure seemingly caused by underflow on `current_num_non_deletions_` which would happen if num_entries < num_deletions. (T186407810)
This change adds an additional check (fail earlier?) and coerces read table properties to satisfy the invariant that is supposed to be provided by https://github.com/facebook/rocksdb/pull/4841 but could be violated by older files, due to
https://github.com/facebook/rocksdb/pull/4016.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12600
Test Plan: existing tests
Reviewed By: ajkr
Differential Revision: D56796191
Pulled By: pdillinger
fbshipit-source-id: 6d22cc40eb74974c42b311293ee2775c6af95afc
Summary:
**Context/Summary:**
As titled. There were two flags serving the same purpose so removed one of them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12610
Test Plan: CI
Reviewed By: jaykorean, ajkr
Differential Revision: D56916119
Pulled By: hx235
fbshipit-source-id: 011140a7945782cc613ca86d4b542db0cf7fb444
Summary:
The test has been flaky for a long time. A recent [failure](https://github.com/facebook/rocksdb/actions/runs/8820808355/job/24215219590?pr=12578) shows that there is still flush running when the assertion fails. I think this is because `WaitForFlushMemTable()` may return before the a flush schedules the next compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12596
Test Plan: I could not repro the failure locally: `gtest-parallel --repeat=8000 --workers=100 ./db_compaction_test --gtest_filter="*CompactionLimiter*"`
Reviewed By: ajkr
Differential Revision: D56715874
Pulled By: cbi42
fbshipit-source-id: f5f64eb30fff7e115c19beedad2dc22afa06258d
Summary:
This PR fixes the following compile errors with Clang:
```
.../rocksdb/env/fs_on_demand.cc:184:5: error: no member named 'for_each' in namespace 'std'; did you mean 'std::ranges::for_each'?
184 | std::for_each(rchildren.begin(), rchildren.end(), [&](std::string& name) {
| ^~~~~~~~~~~~~
| std::ranges::for_each
/opt/homebrew/opt/llvm@17/bin/../include/c++/v1/__algorithm/ranges_for_each.h:68:23: note: 'std::ranges::for_each' declared here
68 | inline constexpr auto for_each = __for_each::__fn{};
| ^
.../rocksdb/env/fs_on_demand.cc:188:10: error: no member named 'sort' in namespace 'std'
188 | std::sort(result->begin(), result->end());
| ~~~~~^
.../rocksdb/env/fs_on_demand.cc:189:10: error: no member named 'sort' in namespace 'std'
189 | std::sort(rchildren.begin(), rchildren.end());
| ~~~~~^
.../rocksdb/env/fs_on_demand.cc:193:10: error: no member named 'set_union' in namespace 'std'
193 | std::set_union(result->begin(), result->end(), rchildren.begin(),
| ~~~~~^
.../rocksdb/env/fs_on_demand.cc:221:5: error: no member named 'for_each' in namespace 'std'; did you mean 'std::ranges::for_each'?
221 | std::for_each(
| ^~~~~~~~~~~~~
| std::ranges::for_each
/opt/homebrew/opt/llvm@17/bin/../include/c++/v1/__algorithm/ranges_for_each.h:68:23: note: 'std::ranges::for_each' declared here
68 | inline constexpr auto for_each = __for_each::__fn{};
| ^
.../rocksdb/env/fs_on_demand.cc:226:10: error: no member named 'sort' in namespace 'std'
226 | std::sort(result->begin(), result->end(), file_attr_sorter);
| ~~~~~^
.../rocksdb/env/fs_on_demand.cc:227:10: error: no member named 'sort' in namespace 'std'
227 | std::sort(rchildren.begin(), rchildren.end(), file_attr_sorter);
| ~~~~~^
.../rocksdb/env/fs_on_demand.cc:231:10: error: no member named 'set_union' in namespace 'std'
231 | std::set_union(rchildren.begin(), rchildren.end(), result->begin(),
| ~~~~~^
8 errors generated.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12588
Reviewed By: jaykorean
Differential Revision: D56656222
Pulled By: ajkr
fbshipit-source-id: 7e94b6250fc9edfe597a61b7622f09d6b6cd9cbd
> NOTE: Entries for next release do not go here. Follow instructions in `unreleased_history/README.txt`
## 9.7.4 (10/31/2024)
### Bug Fixes
* Fix a leak of obsolete blob files left open until DB::Close(). This bug was introduced in version 9.4.0.
## 9.7.3 (10/16/2024)
### Behavior Changes
* OPTIONS file to be loaded by remote worker is now preserved so that it does not get purged by the primary host. A similar technique as how we are preserving new SST files from getting purged is used for this. min_options_file_numbers_ is tracked like pending_outputs_ is tracked.
## 9.7.2 (10/08/2024)
### Bug Fixes
* Fix a bug for surfacing write unix time: `Iterator::GetProperty("rocksdb.iterator.write-time")` for non-L0 files.
## 9.7.1 (09/26/2024)
### Bug Fixes
* Several DB option settings could be lost through `GetOptionsFromString()`, possibly elsewhere as well. Affected options, now fixed:`background_close_inactive_wals`, `write_dbid_to_manifest`, `write_identity_file`, `prefix_seek_opt_in_only`
* Fix under counting of allocated memory in the compressed secondary cache due to looking at the compressed block size rather than the actual memory allocated, which could be larger due to internal fragmentation.
* Skip insertion of compressed blocks in the secondary cache if the lowest_used_cache_tier DB option is kVolatileTier.
## 9.7.0 (09/20/2024)
### New Features
* Make Cache a customizable class that can be instantiated by the object registry.
* Add new option `prefix_seek_opt_in_only` that makes iterators generally safer when you might set a `prefix_extractor`. When `prefix_seek_opt_in_only=true`, which is expected to be the future default, prefix seek is only used when `prefix_same_as_start` or `auto_prefix_mode` are set. Also, `prefix_same_as_start` and `auto_prefix_mode` now allow prefix filtering even with `total_order_seek=true`.
* Add a new table property "rocksdb.key.largest.seqno" which records the largest sequence number of all keys in file. It is verified to be zero during SST file ingestion.
### Behavior Changes
* Changed the semantics of the BlobDB configuration option `blob_garbage_collection_force_threshold` to define a threshold for the overall garbage ratio of all blob files currently eligible for garbage collection (according to `blob_garbage_collection_age_cutoff`). This can provide better control over space amplification at the cost of slightly higher write amplification.
* Set `write_dbid_to_manifest=true` by default. This means DB ID will now be preserved through backups, checkpoints, etc. by default. Also add `write_identity_file` option which can be set to false for anticipated future behavior.
* In FIFO compaction, compactions for changing file temperature (configured by option `file_temperature_age_thresholds`) will compact one file at a time, instead of merging multiple eligible file together (#13018).
* Support ingesting db generated files using hard link, i.e. IngestExternalFileOptions::move_files/link_files and IngestExternalFileOptions::allow_db_generated_files.
* Add a new file ingestion option `IngestExternalFileOptions::link_files` to hard link input files and preserve original files links after ingestion.
* DB::Close now untracks files in SstFileManager, making avaialble any space used
by them. Prior to this change they would be orphaned until the DB is re-opened.
### Bug Fixes
* Fix a bug in CompactRange() where result files may not be compacted in any future compaction. This can only happen when users configure CompactRangeOptions::change_level to true and the change level step of manual compaction fails (#13009).
* Fix handling of dynamic change of `prefix_extractor` with memtable prefix filter. Previously, prefix seek could mix different prefix interpretations between memtable and SST files. Now the latest `prefix_extractor` at the time of iterator creation or refresh is respected.
* Fix a bug with manual_wal_flush and auto error recovery from WAL failure that may cause CFs to be inconsistent (#12995). The fix will set potential WAL write failure as fatal error when manual_wal_flush is true, and disables auto error recovery from these errors.
## 9.6.0 (08/19/2024)
### New Features
* *Best efforts recovery supports recovering to incomplete Version with a clean seqno cut that presents a valid point in time view from the user's perspective, if versioning history doesn't include atomic flush.
* New option `BlockBasedTableOptions::decouple_partitioned_filters` should improve efficiency in serving read queries because filter and index partitions can consistently target the configured `metadata_block_size`. This option is currently opt-in.
* Introduce a new mutable CF option `paranoid_memory_checks`. It enables additional validation on data integrity during reads/scanning. Currently, skip list based memtable will validate key ordering during look up and scans.
### Public API Changes
* Add ticker stats to count file read retries due to checksum mismatch
* Adds optional installation callback function for remote compaction
### Behavior Changes
* There may be less intra-L0 compaction triggered by total L0 size being too small. We now use compensated file size (tombstones are assigned some value size) when calculating L0 size and reduce the threshold for L0 size limit. This is to avoid accumulating too much data/tombstones in L0.
### Bug Fixes
* *Make DestroyDB supports slow deletion when it's configured in `SstFileManager`. The slow deletion is subject to the configured `rate_bytes_per_sec`, but not subject to the `max_trash_db_ratio`.
* Fixed a bug where we set unprep_seqs_ even when WriteImpl() fails. This was caught by stress test write fault injection in WriteImpl(). This may have incorrectly caused iteration creation failure for unvalidated writes or returned wrong result for WriteUnpreparedTxn::GetUnpreparedSequenceNumbers().
* Fixed a bug where successful write right after error recovery for last failed write finishes causes duplicate WAL entries
* Fixed a data race involving the background error status in `unordered_write` mode.
* *Fix a bug where file snapshot functions like backup, checkpoint may attempt to copy a non-existing manifest file. #12882
* Fix a bug where per kv checksum corruption may be ignored in MultiGet().
* Fix a race condition in pessimistic transactions that could allow multiple transactions with the same name to be registered simultaneously, resulting in a crash or other unpredictable behavior.
## 9.5.0 (07/19/2024)
### Public API Changes
* Introduced new C API function rocksdb_writebatch_iterate_cf for column family-aware iteration over the contents of a WriteBatch
* Add support to ingest SST files generated by a DB instead of SstFileWriter. This can be enabled with experimental option `IngestExternalFileOptions::allow_db_generated_files`.
### Behavior Changes
* When calculating total log size for the `log_size_for_flush` argument in `CreateCheckpoint` API, the size of the archived log will not be included to avoid unnecessary flush
### Bug Fixes
* Fix a major bug in which an iterator using prefix filtering and SeekForPrev might miss data when the DB is using `whole_key_filtering=false` and `partition_filters=true`.
* Fixed a bug where `OnErrorRecoveryBegin()` is not called before auto recovery starts.
* Fixed a bug where event listener reads ErrorHandler's `bg_error_` member without holding db mutex(#12803).
* Fixed a bug in handling MANIFEST write error that caused the latest valid MANIFEST file to get deleted, resulting in the DB being unopenable.
* Fixed a race between error recovery due to manifest sync or write failure and external SST file ingestion. Both attempt to write a new manifest file, which causes an assertion failure.
### Performance Improvements
* Fix an issue where compactions were opening table files and reading table properties while holding db mutex_.
* Reduce unnecessary filesystem queries and DB mutex acquires in creating backups and checkpoints.
## 9.4.0 (06/23/2024)
### New Features
* Added a `CompactForTieringCollectorFactory` to auto trigger compaction for tiering use case.
* Optimistic transactions and pessimistic transactions with the WriteCommitted policy now support the `GetEntityForUpdate` API.
* Added a new "count" command to the ldb repl shell. By default, it prints a count of keys in the database from start to end. The options --from=<key> and/or --to=<key> can be specified to limit the range.
* Add `rocksdb_writebatch_update_timestamps`, `rocksdb_writebatch_wi_update_timestamps` in C API.
* Add `rocksdb_iter_refresh` in C API.
* Add `rocksdb_writebatch_create_with_params`, `rocksdb_writebatch_wi_create_with_params` to create WB and WBWI with all options in C API
### Public API Changes
* Deprecated names `LogFile` and `VectorLogPtr` in favor of new names `WalFile` and `VectorWalPtr`.
* Introduce a new universal compaction option CompactionOptionsUniversal::max_read_amp which allows user to define the limit on the number of sorted runs separately from the trigger for compaction (`level0_file_num_compaction_trigger`) #12477.
### Behavior Changes
* Inactive WALs are immediately closed upon being fully sync-ed rather than in a background thread. This is to ensure LinkFile() is not called on files still open for write, which might not be supported by some FileSystem implementations. This should not be a performance issue, but an opt-out is available with with new DB option `background_close_inactive_wals`.
### Bug Fixes
* Fix a rare case in which a hard-linked WAL in a Checkpoint is not fully synced (so might lose data on power loss).
* Fixed the output of the `ldb dump_wal` command for `PutEntity` records so it prints the key and correctly resets the hexadecimal formatting flag after printing the wide-column entity.
* Fixed an issue where `PutEntity` records were handled incorrectly while rebuilding transactions during recovery.
* Various read operations could ignore various ReadOptions that might be relevant. Fixed many such cases, which can result in behavior change but a better reflection of specified options.
### Performance Improvements
* Improved write throughput to memtable when there's a large number of concurrent writers and allow_concurrent_memtable_write=true(#12545)
## 9.3.0 (05/17/2024)
### New Features
* Optimistic transactions and pessimistic transactions with the WriteCommitted policy now support the `GetEntity` API.
* Added new `Iterator` property, "rocksdb.iterator.is-value-pinned", for checking whether the `Slice` returned by `Iterator::value()` can be used until the `Iterator` is destroyed.
* Optimistic transactions and WriteCommitted pessimistic transactions now support the `MultiGetEntity` API.
* Optimistic transactions and pessimistic transactions with the WriteCommitted policy now support the `PutEntity` API. Support for read APIs and other write policies (WritePrepared, WriteUnprepared) will be added later.
### Public API Changes
* Exposed block based metadata cache options via C API
* Exposed compaction pri via c api.
* Add a kAdmPolicyAllowAll option to TieredAdmissionPolicy that admits all blocks evicted from the primary block cache into the compressed secondary cache.
### Behavior Changes
* CompactRange() with change_level=true on a CF with FIFO compaction will return Status::NotSupported().
* External file ingestion with FIFO compaction will always ingest to L0.
### Bug Fixes
* Fixed a bug for databases using `DBOptions::allow_2pc == true` (all `TransactionDB`s except `OptimisticTransactionDB`) that have exactly one column family. Due to a missing WAL sync, attempting to open the DB could have returned a `Status::Corruption` with a message like "SST file is ahead of WALs".
* Fix a bug in CreateColumnFamilyWithImport() where if multiple CFs are imported, we were not resetting files' epoch number and L0 files can have overlapping key range but the same epoch number.
* Fixed race conditions when `ColumnFamilyOptions::inplace_update_support == true` between user overwrites and reads on the same key.
* Fix a bug where `CompactFiles()` can compact files of range conflict with other ongoing compactions' when `preclude_last_level_data_seconds > 0` is used
* Fixed a false positive `Status::Corruption` reported when reopening a DB that used `DBOptions::recycle_log_file_num > 0` and `DBOptions::wal_compression != kNoCompression`.
* While WAL is locked with LockWAL(), some operations like Flush() and IngestExternalFile() are now blocked as they should have been.
* Fixed a bug causing stale memory access when using the TieredSecondaryCache with an NVM secondary cache, and a file system that supports return an FS allocated buffer for MultiRead (FSSupportedOps::kFSBuffer is set).
## 9.2.0 (05/01/2024)
### New Features
* Added two options `deadline` and `max_size_bytes` for CacheDumper to exit early
* Added a new API `GetEntityFromBatchAndDB` to `WriteBatchWithIndex` that can be used for wide-column point lookups with read-your-own-writes consistency. Similarly to `GetFromBatchAndDB`, the API can combine data from the write batch with data from the underlying database if needed. See the API comments for more details.
* [Experimental] Introduce two new cross-column-family iterators - CoalescingIterator and AttributeGroupIterator. The CoalescingIterator enables users to iterate over multiple column families and access their values and columns. During this iteration, if the same key exists in more than one column family, the keys in the later column family will overshadow the previous ones. The AttributeGroupIterator allows users to gather wide columns per Column Family and create attribute groups while iterating over keys across all CFs.
* Added a new API `MultiGetEntityFromBatchAndDB` to `WriteBatchWithIndex` that can be used for batched wide-column point lookups with read-your-own-writes consistency. Similarly to `MultiGetFromBatchAndDB`, the API can combine data from the write batch with data from the underlying database if needed. See the API comments for more details.
* *Adds a `SstFileReader::NewTableIterator` API to support programmatically read a SST file as a raw table file.
* Add an option to `WaitForCompactOptions` - `wait_for_purge` to make `WaitForCompact()` API wait for background purge to complete
### Public API Changes
* DeleteRange() will return NotSupported() if row_cache is configured since they don't work together in some cases.
* Deprecated `CompactionOptions::compression` since `CompactionOptions`'s API for configuring compression was incomplete, unsafe, and likely unnecessary
* Using `OptionChangeMigration()` to migrate from non-FIFO to FIFO compaction
with `Options::compaction_options_fifo.max_table_files_size` > 0 can cause
the whole DB to be dropped right after migration if the migrated data is larger than
`max_table_files_size`
### Behavior Changes
* Enabling `BlockBasedTableOptions::block_align` is now incompatible (i.e., APIs will return `Status::InvalidArgument`) with more ways of enabling compression: `CompactionOptions::compression`, `ColumnFamilyOptions::compression_per_level`, and `ColumnFamilyOptions::bottommost_compression`.
* Changed the default value of `CompactionOptions::compression` to `kDisableCompressionOption`, which means the compression type is determined by the `ColumnFamilyOptions`.
* `BlockBasedTableOptions::optimize_filters_for_memory` is now set to true by default. When `partition_filters=false`, this could lead to somewhat increased average RSS memory usage by the block cache, but this "extra" usage is within the allowed memory budget and should make memory usage more consistent (by minimizing internal fragmentation for more kinds of blocks).
* Dump all keys for cache dumper impl if `SetDumpFilter()` is not called
* `CompactRange()` with `CompactRangeOptions::change_level = true` and `CompactRangeOptions::target_level = 0` that ends up moving more than 1 file from non-L0 to L0 will return `Status::Aborted()`.
* On distributed file systems that support file system level checksum verification and reconstruction reads, RocksDB will now retry a file read if the initial read fails RocksDB block level or record level checksum verification. This applies to MANIFEST file reads when the DB is opened, and to SST file reads at all times.
### Bug Fixes
* Fix a bug causing `VerifyFileChecksums()` to return false-positive corruption under `BlockBasedTableOptions::block_align=true`
* Provide consistent view of the database across the column families for `NewIterators()` API.
* Fixed feature interaction bug for `DeleteRange()` together with `ColumnFamilyOptions::memtable_insert_with_hint_prefix_extractor`. The impact of this bug would likely be corruption or crashing.
* Fixed hang in `DisableManualCompactions()` where compactions waiting to be scheduled due to conflicts would not be canceled promptly
* Fixed a regression when `ColumnFamilyOptions::max_successive_merges > 0` where the CPU overhead for deciding whether to merge could have increased unless the user had set the option `ColumnFamilyOptions::strict_max_successive_merges`
* Fixed a bug in `MultiGet()` and `MultiGetEntity()` together with blob files (`ColumnFamilyOptions::enable_blob_files == true`). An error looking up one of the keys could cause the results to be wrong for other keys for which the statuses were `Status::OK`.
* Fixed a bug where wrong padded bytes are used to generate file checksum and `DataVerificationInfo::checksum` upon file creation
* Correctly implemented the move semantics of `PinnableWideColumns`.
* Fixed a bug when the recycle_log_file_num in DBOptions is changed from 0 to non-zero when a DB is reopened. On a subsequent reopen, if a log file created when recycle_log_file_num==0 was reused previously, is alive and is empty, we could end up inserting stale WAL records into the memtable.
* *Fix a bug where obsolete files' deletion during DB::Open are not rate limited with `SstFilemManager`'s slow deletion feature even if it's configured.
## 9.1.0 (03/22/2024)
### New Features
* Added an option, `GetMergeOperandsOptions::continue_cb`, to give users the ability to end `GetMergeOperands()`'s lookup process before all merge operands were found.
// First, if it is in recovery and the recovery_error is ok. Set the
// recovery_error_ to bg_err. Second, if the severity is higher than the
Loaded 100 of 395 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Peter Dillinger
Jay Huh
Yu Zhang
anand76
Levi Tamasi
Changyu Bi
Levi Tamasi
Nick Brekhus
Jon Janzen
leipeng
Nicholas Ormrod
Yu Zhang
Symious
eniac1024
Radek Hubner
Hui Xiao
SGZW
WangQian
Changyu Bi
Konstantin Ilin
w41ter
Jeffery
Zixuan Tan
WangQian
Chdy
HypenZou
Jason Volk
Richard Barnes
Andrew Kryczka
Jonah Gao
mingwei
Evan Jones
Eduardo Menges Mattje
Adam Kupczyk
wuruilong
Valery Mironov
Po-Chuan Hsieh
Andrii Lysenko
hgy@ruijie.com.cn
Rulin Huang
muthukrishnan24
Jaepil Jeong
Daniel Vasquez Lopez
Fan Zhang(DevX)
Davide Angelocola
raffertyyu
Wei Liu
Hans Holmberg
Zaidoon Abd Al Hadi
Patrik Valo
Jaepil Jeong