Summary:
Somehow we had the wrong checksum when validating the ZStd 1.5.5 download for RocksJava in the previous Pull Request - https://github.com/facebook/rocksdb/pull/9304. This PR fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12005
Reviewed By: jaykorean
Differential Revision: D50840338
Pulled By: cbi42
fbshipit-source-id: 8a92779d3bef013d812eecb89aaaf33fc73991ec
Summary:
As titled. If SstFileManager is available, deleting stale sst files will be delegated to it so it can be rate limited.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12016
Reviewed By: hx235
Differential Revision: D50670482
Pulled By: jowlyzhang
fbshipit-source-id: bde5b76ea1d98e67f6b4f08bfba3db48e46aab4e
Summary:
In `TieredCache`, the underlying compressed secondary cache is hidden from the user. So we need a way to query the capacity, as well as the portion of cache reservation charged to the compressed secondary cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12011
Test Plan: Update the unit tests
Reviewed By: akankshamahajan15
Differential Revision: D50651943
Pulled By: anand1976
fbshipit-source-id: 06d1cb5edb75a790c919bce718e2ff65f5908220
Summary:
Combining best parts of https://github.com/facebook/rocksdb/issues/11794 and https://github.com/facebook/rocksdb/issues/11766, fixing the CircleCI config in the latter. I was going to amend the latter but wasn't granted access.
Ideally this would be ported back to 8.4 branch and crc32c part into 8.3 branch.
BACKPORT NOTE: removed CircleCI config changes from this diff as they
depend (at least superficially) on changes not in this branch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12008
Test Plan: CI
Reviewed By: hx235
Differential Revision: D50616172
Pulled By: pdillinger
fbshipit-source-id: fa7f778bc281e881a140522e774f480c6d1e5f48
Summary:
With the introduction of the `UpdateTieredCache` API, its possible to dynamically change the compressed secondary cache ratio of the total cache capacity. In order to optimize performance, we avoid using a mutex when inserting/releasing placeholder entries, which can result in some inaccuracy in the accounting during the dynamic update. This inaccuracy was causing a runtime error due to an integer underflow in `UpdateCacheReservationRatio`, causing ubsan crash tests to fail. This PR fixes it by explicitly checking for the underflow.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11949
Test Plan:
1. Added a unit test that fails without the fix
2. Run ubsan_crash
Reviewed By: akankshamahajan15
Differential Revision: D50240217
Pulled By: anand1976
fbshipit-source-id: d2f7b79da54eec8b61aec2cc1f2943da5d5847ac
Summary:
Fix https://github.com/facebook/rocksdb/issues/11607
Fix https://github.com/facebook/rocksdb/issues/11679
Fix https://github.com/facebook/rocksdb/issues/11606
Fix https://github.com/facebook/rocksdb/issues/2343
Add bounds checking to `WBWIIteratorImpl`, which will be reflected in `BaseDeltaIterator::delta_iterator_::Valid()`, just like `BaseDeltaIterator::base_iterator_::Valid()`. In this way, the two sub itertors become more aligned from `BaseDeltaIterator`'s perspective. Like `DBIter`, the added bounds checking caps in either bound when seeking and disvalidates the `WBWIIteratorImpl` iterator when the lower bound is past or the upper bound is reached.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11680
Test Plan:
- A simple test added to write_batch_with_index_test.cc to exercise the bounds checking in `WBWIIteratorImpl`.
- A sophisticated test added to transaction_test.cc to assert that `Transaction` with different write policies honor bounds in `ReadOptions`. It should be so as long as the `BaseDeltaIterator` is correctly coordinating the two sub iterators to perform iterating and bounds checking.
Reviewed By: ajkr
Differential Revision: D48125229
Pulled By: cbi42
fbshipit-source-id: c9acea52595aed1471a63d7ca6ef15d2a2af1367
Summary:
A race condition between recovery and backup can happen with error messages like this:
```Failure in BackupEngine::CreateNewBackup with: IO error: No such file or directory: While opening a file for sequentially reading: /dev/shm/rocksdb_test/rocksdb_crashtest_whitebox/002653.log: No such file or directory```
PR https://github.com/facebook/rocksdb/issues/6949 introduced disabling file deletion during error handling of manifest IO errors. Aformentioned race condition is caused by this chain of event:
[Backup engine] disable file deletion
[Recovery] disable file deletion <= this is optional for the race condition, it may or may not get called
[Backup engine] get list of file to copy/link
[Recovery] force enable file deletion
.... some files refered by backup engine get deleted
[Backup engine] copy/link file <= error no file found
This PR fixes this with:
1) Recovery thread is currently forcing enabling file deletion as long as file deletion is disabled. Regardless of whether the previous error handling is for manifest IO error and that disabled it in the first place. This means it could incorrectly enabling file deletions intended by other threads like backup threads, file snapshotting threads. This PR does this check explicitly before making the call.
2) `disable_delete_obsolete_files_` is designed as a counter to allow different threads to enable and disable file deletion separately. The recovery thread currently does a force enable file deletion, because `ErrorHandler::SetBGError()` can be called multiple times by different threads when they receive a manifest IO error(details per PR https://github.com/facebook/rocksdb/issues/6949), resulting in `DBImpl::DisableFileDeletions` to be called multiple times too. Making a force enable file deletion call that resets the counter `disable_delete_obsolete_files_` to zero is a workaround for this. However, as it shows in the race condition, it can incorrectly suppress other threads like a backup thread's intention to keep the file deletion disabled. <strike>This PR adds a `std::atomic<int> disable_file_deletion_count_` to the error handler to track the needed counter decrease more precisely</strike>. This PR tracks and caps file deletion enabling/disabling in error handler.
3) for recovery, the section to find obsolete files and purge them was moved to be done after the attempt to enable file deletion. The actual finding and purging is more likely to happen if file deletion was previously disabled and get re-enabled now. An internal function `DBImpl::EnableFileDeletionsWithLock` was added to support change 2) and 3). Some useful logging was explicitly added to keep those log messages around.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11955
Test Plan: existing unit tests
Reviewed By: anand1976
Differential Revision: D50290592
Pulled By: jowlyzhang
fbshipit-source-id: 73aa8331ca4d636955a5b0324b1e104a26e00c9b
Summary:
Fix corruption error - "Corruption: first key in index doesn't match first key in block". when auto_readahead_size is enabled. Error is because of bug when index_iter_ moves forward, first_internal_key of that index_iter_ is not copied. So the Slice points to a different key resulting in wrong comparison when doing comparison.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11961
Test Plan: Ran stress test which reproduced this error.
Reviewed By: anand1976
Differential Revision: D50310589
Pulled By: akankshamahajan15
fbshipit-source-id: 95d8320b8388f1e3822c32024f84754f3a20a631
Summary:
We saw the following TSAN stress test failure:
```
WARNING: ThreadSanitizer: data race (pid=17523)
Write of size 1 at 0x7b8c000008b9 by thread T4243 (mutexes: write M0):
#0 rocksdb::ErrorHandler::RecoverFromRetryableBGIOError() fbcode/internal_repo_rocksdb/repo/db/error_handler.cc:742 (db_stress+0x95f954) (BuildId: 35795dfb86ddc9c4f20ddf08a491f24d)
https://github.com/facebook/rocksdb/issues/1 std::thread::_State_impl<std::thread::_Invoker<std::tuple<void (rocksdb::ErrorHandler::*)(), rocksdb::ErrorHandler*>>>::_M_run() fbcode/third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/invoke.h:74 (db_stress+0x95fc2b) (BuildId: 35795dfb86ddc9c4f20ddf08a491f24d)
https://github.com/facebook/rocksdb/issues/2 execute_native_thread_routine /home/engshare/third-party2/libgcc/11.x/src/gcc-11.x/x86_64-facebook-linux/libstdc++-v3/src/c++11/../../../.././libstdc++-v3/src/c++11/thread.cc:82:18 (libstdc++.so.6+0xdf4e4) (BuildId: 452d1cdae868baeeb2fdf1ab140f1c219bf50c6e)
Previous read of size 1 at 0x7b8c000008b9 by thread T22:
#0 rocksdb::DBImpl::SyncClosedLogs(rocksdb::JobContext*, rocksdb::VersionEdit*) fbcode/internal_repo_rocksdb/repo/db/error_handler.h:76 (db_stress+0x84f69c) (BuildId: 35795dfb86ddc9c4f20ddf08a491f24d)
```
This is due to a data race in accessing `recovery_in_prog_`. This PR fixes it by accessing `recovery_in_prog_` under db mutex before calling `SyncClosedLogs()`. I think the original PR https://github.com/facebook/rocksdb/pull/10489 intended to clear the error if it's a recovery flush. So ideally we can also just check flush reason. I plan to keep a safer change in this PR and make that change in the future if needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11950
Test Plan: check future TSAN stress test results.
Reviewed By: anand1976
Differential Revision: D50242255
Pulled By: cbi42
fbshipit-source-id: 0d487948ef9546b038a34460f3bb037f6e5bfc58
Summary:
We were seeing the following stress test failures:
```LevelCompactionBuilder::PickFileToCompact(const rocksdb::autovector<std::pair<int, rocksdb::FileMetaData*> >&, bool): Assertion `!level_file.second->being_compacted' failed```
This can happen when we are picking a file to be compacted from some files marked for compaction, but that file is already being_compacted. We prevent this by always calling `ComputeCompactionScore()` after we pick a compaction and mark some files as being_compacted. However, if SetOptions() is called to disable marking certain files to be compacted, say `enable_blob_garbage_collection`, we currently just skip the relevant logic in `ComputeCompactionScore()` without clearing the existing files already marked for compaction. This PR fixes this issue by already clearing these files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11946
Test Plan: existing tests.
Reviewed By: akankshamahajan15
Differential Revision: D50232608
Pulled By: cbi42
fbshipit-source-id: 11e4fb5e9d48b0f946ad33b18f7c005f0161f496
Summary:
1. Prevent a double join on a `port::Thread`
2. Ensure `recovery_in_prog_` and `bg_error_` are both set under same lock hold. This is useful for writers who see a non-OK `bg_error_` and are deciding whether to stall based on whether the error will be auto-recovered.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11939
Reviewed By: cbi42
Differential Revision: D50155484
Pulled By: ajkr
fbshipit-source-id: fbc1f85c50e7eaee27ee0e376aee688d8a06c93b
Summary:
cbi42 pointed out a race condition in which `recovery_io_error_` and `recovery_error_` could be updated inconsistently due to releasing the DB mutex in `EventHelpers::NotifyOnBackgroundError()`. There doesn't seem to be a point to having two status objects, so this PR consolidates them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11937
Reviewed By: cbi42
Differential Revision: D50105793
Pulled By: ajkr
fbshipit-source-id: 3de95baccfa44351a49a5c2aa0986c9bc81baa8f
Summary:
Context/Summary: this option is experimental right now
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11926
Test Plan: no code change
Reviewed By: jaykorean
Differential Revision: D49985000
Pulled By: hx235
fbshipit-source-id: a5b439ed35e3d6bb04c125f222ac29cd3842d1a1
Summary:
1. **Error** in TestIterateAgainstExpected API - `Assertion index < pre_read_expected_values.size() && index < post_read_expected_values.size() failed.`
**Fix** - `Prev` op is not supported with `auto_readahead_size`. So added support to Reseek in db_iter, if Prev is called. In BlockBasedTableIterator, index_iter_ already moves forward. So there is no way to do Prev from BlockBasedTableIterator.
2. **Error** - `void rocksdb::BlockBasedTableIterator::BlockCacheLookupForReadAheadSize(uint64_t, size_t, size_t&): Assertion index_iter_->value().handle.offset() == offset`
**Fix** - Remove prefetch_buffer to be used when uncompressed dict is read.
3. ** Error in TestPrefixScan API - `db_stress: db/db_iter.cc:369: bool rocksdb::DBIter::FindNextUserEntryInternal(bool, const rocksdb::Slice*): Assertion !skipping_saved_key || CompareKeyForSkip(ikey_.user_key, saved_key_.GetUserKey()) > 0 failed.
Received signal 6 (Aborted)
Invoking GDB for stack trace...
db_stress: table/merging_iterator.cc:1036: bool rocksdb::MergingIterator::SkipNextDeleted(): Assertion comparator_->Compare(range_tombstone_iters_[i]->start_key(), pik) <= 0 failed`
**Fix** - SeekPrev also calls 1) SeekPrev , 2)Seek and then 3)Prev in some cases in db_iter.cc leading to failure of Prev operation. These backward operations also call Seek. Added direction to disable lookup once direction is backwards in BlockBasedTableIterator.cc
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11884
Test Plan: Ran various flavors of crash tests locally for the whole duration
Reviewed By: anand1976
Differential Revision: D49834201
Pulled By: akankshamahajan15
fbshipit-source-id: 9a007b4d46a48002c43dc4623a400ecf47d997fe
Summary:
In https://github.com/facebook/rocksdb/issues/11812, the ```CacheWithSecondaryAdapter::Insert``` calls ```InsertSaved``` on the secondary cache to warm it up with the compressed blocks. This should only be done if its a stacked cache with compressed and nvm cache. If its in-memory compressed only, then don't call ```InsertSaved```.
Tests:
Add a new unit test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11889
Reviewed By: akankshamahajan15
Differential Revision: D49615758
Pulled By: anand1976
fbshipit-source-id: 156ff968ad014ac319f8840da7a48193e4cebfa9
Summary:
https://github.com/facebook/rocksdb/issues/11872 causes a unit test to start failing with the error message below. The cause is that the additional call to `FlushAllColumnFamilies()` in `DBImpl::ResumeImpl()` can run while DB is closing. More detailed explanation: there are two places where we call `ResumeImpl()`:
1. in `ErrorHandler::RecoverFromBGError`, for manual resume or recovery from errors like OutOfSpace through sst file manager, and
2. in `Errorhandler::RecoverFromRetryableBGIOError`, for error recovery from errors like flush failure due to retryable IOError. This is tracked by `ErrorHandler::recovery_thread_`.
Here is how DB close waits for error recovery: https://github.com/facebook/rocksdb/blob/49da91ec097b4efcd8a8e4dc1b287e9f81eb4093/db/db_impl/db_impl.cc#L540-L543
`CancelErrorRecovery()` waits until `recovery_thread_` finishes and `IsRecoveryInProgress()` checks the `recovery_in_prog_` flag. The additional call to `FlushAllColumnFamilies()` in `ResumeImpl()` happens after it clears bg error and the `recovery_in_prog_` flag: https://github.com/facebook/rocksdb/blob/49da91ec097b4efcd8a8e4dc1b287e9f81eb4093/db/db_impl/db_impl.cc#L436-L463. So if `ResumeImpl()` is called in `RecoverFromBGError()`, we can have a thread running `FlushAllColumnFamilies()` while DB is closing and thought that recovery is done.
The fix is to only do the additional call to `FlushAllColumnFamilies()` when doing error recovery through `Errorhandler::RecoverFromRetryableBGIOError` by setting flags in `DBRecoverContext`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11880
Test Plan:
`gtest-parallel --repeat=100 --workers=4 ./error_handler_fs_test --gtest_filter="*AutoRecoverFlushError*"` reproduces the error pretty reliably.
```[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBErrorHandlingFSTest
[ RUN ] DBErrorHandlingFSTest.AutoRecoverFlushError
error_handler_fs_test: db/column_family.cc:1618: rocksdb::ColumnFamilySet::~ColumnFamilySet(): Assertion `last_ref' failed.
Received signal 6 (Aborted)
...
https://github.com/facebook/rocksdb/issues/10 0x00007fac4409efd6 in __GI___assert_fail (assertion=0x7fac452c0afa "last_ref", file=0x7fac452c9fb5 "db/column_family.cc", line=1618, function=0x7fac452cb950 "rocksdb::ColumnFamilySet::~ColumnFamilySet()") at assert.c:101
101 in assert.c
https://github.com/facebook/rocksdb/issues/11 0x00007fac44b5324f in rocksdb::ColumnFamilySet::~ColumnFamilySet (this=0x7b5400000000) at db/column_family.cc:1618
1618 assert(last_ref);
https://github.com/facebook/rocksdb/issues/12 0x00007fac44e0f047 in std::default_delete<rocksdb::ColumnFamilySet>::operator() (this=0x7b5800000940, __ptr=0x7b5400000000) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:85
85 delete __ptr;
https://github.com/facebook/rocksdb/issues/13 std::__uniq_ptr_impl<rocksdb::ColumnFamilySet, std::default_delete<rocksdb::ColumnFamilySet> >::reset (this=0x7b5800000940, __p=0x0) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:182
182 _M_deleter()(__old_p);
https://github.com/facebook/rocksdb/issues/14 std::unique_ptr<rocksdb::ColumnFamilySet, std::default_delete<rocksdb::ColumnFamilySet> >::reset (this=0x7b5800000940, __p=0x0) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:456
456 _M_t.reset(std::move(__p));
https://github.com/facebook/rocksdb/issues/15 rocksdb::VersionSet::~VersionSet (this=this@entry=0x7b5800000900) at db/version_set.cc:5081
5081 column_family_set_.reset();
https://github.com/facebook/rocksdb/issues/16 0x00007fac44e0f97a in rocksdb::VersionSet::~VersionSet (this=0x7b5800000900) at db/version_set.cc:5078
5078 VersionSet::~VersionSet() {
https://github.com/facebook/rocksdb/issues/17 0x00007fac44bf0b2f in std::default_delete<rocksdb::VersionSet>::operator() (this=0x7b8c00000068, __ptr=0x7b5800000900) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:85
85 delete __ptr;
https://github.com/facebook/rocksdb/issues/18 std::__uniq_ptr_impl<rocksdb::VersionSet, std::default_delete<rocksdb::VersionSet> >::reset (this=0x7b8c00000068, __p=0x0) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:182
182 _M_deleter()(__old_p);
https://github.com/facebook/rocksdb/issues/19 std::unique_ptr<rocksdb::VersionSet, std::default_delete<rocksdb::VersionSet> >::reset (this=0x7b8c00000068, __p=0x0) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:456
456 _M_t.reset(std::move(__p));
https://github.com/facebook/rocksdb/issues/20 rocksdb::DBImpl::CloseHelper (this=this@entry=0x7b8c00000000) at db/db_impl/db_impl.cc:676
676 versions_.reset();
https://github.com/facebook/rocksdb/issues/21 0x00007fac44bf1346 in rocksdb::DBImpl::CloseImpl (this=0x7b8c00000000) at db/db_impl/db_impl.cc:720
720 Status DBImpl::CloseImpl() { return CloseHelper(); }
https://github.com/facebook/rocksdb/issues/22 rocksdb::DBImpl::~DBImpl (this=this@entry=0x7b8c00000000) at db/db_impl/db_impl.cc:738
738 closing_status_ = CloseImpl();
https://github.com/facebook/rocksdb/issues/23 0x00007fac44bf2bba in rocksdb::DBImpl::~DBImpl (this=0x7b8c00000000) at db/db_impl/db_impl.cc:722
722 DBImpl::~DBImpl() {
https://github.com/facebook/rocksdb/issues/24 0x00007fac455444d4 in rocksdb::DBTestBase::Close (this=this@entry=0x7b6c00000000) at db/db_test_util.cc:678
678 delete db_;
https://github.com/facebook/rocksdb/issues/25 0x00007fac455455fb in rocksdb::DBTestBase::TryReopen (this=this@entry=0x7b6c00000000, options=...) at db/db_test_util.cc:707
707 Close();
https://github.com/facebook/rocksdb/issues/26 0x00007fac45543459 in rocksdb::DBTestBase::Reopen (this=0x7ffed74b79a0, options=...) at db/db_test_util.cc:670
670 ASSERT_OK(TryReopen(options));
https://github.com/facebook/rocksdb/issues/27 0x00000000004f2522 in rocksdb::DBErrorHandlingFSTest_AutoRecoverFlushError_Test::TestBody (this=this@entry=0x7b6c00000000) at db/error_handler_fs_test.cc:1224
1224 Reopen(options);
```
Reviewed By: jowlyzhang
Differential Revision: D49579701
Pulled By: cbi42
fbshipit-source-id: 3fc8325e6dde7e7faa8bcad95060cb4e26eda638
Summary:
Crash tests are failing with recent change of auto_readahead_size. Disable it in stress tests and enable it with fix to clear the crash tests failures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11883
Reviewed By: pdillinger
Differential Revision: D49597854
Pulled By: akankshamahajan15
fbshipit-source-id: 0af8ca7414ee9b92f244ee0fb811579c3c052b41
Summary:
**Context/Summary:**
https://github.com/facebook/rocksdb/pull/11631 introduced an undesired fallback behavior to RocksDB internal prefetching even when FS prefetching return non-OK status other than "Unsupported". We only want to fall back when FS prefetching is not supported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11897
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D49667055
Pulled By: hx235
fbshipit-source-id: fa36e4e5d6dc9507080217035f9d6ff8e4abda28
Summary:
**Context/Summary:**
https://github.com/facebook/rocksdb/pull/11631 introduced `readahead()` system call for compaction read under non direct IO. When `Options::compaction_readahead_size` is 0, the `readahead()` will issued with a small size (i.e, the block size, by default 4KB)
Benchmarks shows that such readahead() call regresses the compaction read compared with "no readahead()" case (see Test Plan for more).
Therefore we decided to not issue such `readhead() ` when `Options::compaction_readahead_size` is 0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11887
Test Plan:
Settings: `compaction_readahead_size = 0, use_direct_reads=false`
Setup:
```
TEST_TMPDIR=../ ./db_bench -benchmarks=filluniquerandom -disable_auto_compactions=true -write_buffer_size=1048576 -compression_type=none -value_size=10240 && tar -cf ../dbbench.tar -C ../dbbench/ .
```
Run:
```
for i in $(seq 3); do rm -rf ../dbbench/ && mkdir -p ../dbbench/ && tar -xf ../dbbench.tar -C ../dbbench/ . && sudo bash -c 'sync && echo 3 > /proc/sys/vm/drop_caches' && TEST_TMPDIR=../ /usr/bin/time ./db_bench_{pre_PR11631|PR11631|PR11631_with_improvementPR11887} -benchmarks=compact -use_existing_db=true -db=../dbbench/ -disable_auto_compactions=true -compression_type=none ; done |& grep elapsed
```
pre-PR11631("no readahead()" case):
PR11631:
PR11631+this improvement:
Reviewed By: ajkr
Differential Revision: D49607266
Pulled By: hx235
fbshipit-source-id: 2efa0dc91bac3c11cc2be057c53d894645f683ef
Summary:
Implement block cache lookup to determine readahead_size during scans. It's enabled if auto_readahead_size, block_cache and iterate_upper_bound - all three are set.
Design -
1. Whenever there is a cache miss and FilePrefetchBuffer is called, a callback is made to determine readahead_size for that prefetching.
2. The callback iterates over index and do block cache lookup for each data block handle until existing readahead_size is reached. Then It removes the cache hit data blocks from end to calculate optimized readahead_size.
3. Since index_iter_ is moved, it stores block handles in a queue, and use that queue to get block handle instead of doing index_iter_->Next().
4. This is for Sync scans. Async scans support is in progress.
NOTE:
The issue right now is after Seek and Next, if Prev is called, there is no way to do Prev operation. index_iter_ is already pointing to a different block. So it returns "Not supported" in that case with error message - "auto tuning of readahead size is not supported with Prev op"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11860
Test Plan:
- Added new unit test
- crash_tests
- Running scans locally to check for any regression
Reviewed By: anand1976
Differential Revision: D49548118
Pulled By: akankshamahajan15
fbshipit-source-id: f1aee409a71b4ad9e5bf3610f43edf30c6630c78
Summary:
Updating the tiered cache (cache allocated using ```NewTieredCache()```) by calling ```SetCapacity()``` on it was not working properly. The initial creation would set the primary cache capacity to the combined primary and compressed secondary cache capacity. But ```SetCapacity()``` would just set the primary cache capacity, with no way to change the secondary cache capacity. Additionally, the API was confusing, since the primary and compressed secondary capacities would be specified separately during creation, but ```SetCapacity``` took the combined capacity.
With this fix, the user always specifies the total budget and compressed secondary cache ratio on creation. Subsequently, `SetCapacity` will distribute the new capacity across the two caches by the same ratio. The `NewTieredCache` API has been changed to take the total cache capacity (inclusive of both the primary and the compressed secondary cache) and the ratio of total capacity to allocate to the compressed cache. These are specified in `TieredCacheOptions`. Any capacity specified in `LRUCacheOptions`, `HyperClockCacheOptions` and `CompressedSecondaryCacheOptions` is ignored. A new API, `UpdateTieredCache` is provided to dynamically update the total capacity, ratio of compressed cache, and admission policy.
Tests:
New unit tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11873
Reviewed By: akankshamahajan15
Differential Revision: D49562250
Pulled By: anand1976
fbshipit-source-id: 57033bc713b68d5da6292207765a6b3dbe539ddf
Summary:
Provide an override implementation of `Iterator::timestamp` API for `BaseDeltaIterator` so that timestamp read from DB can be surfaced by an iterator created from inside of a transaction.
The behavior of the API follows this rule:
1) If the entry is read from within the transaction, an empty `Slice` is returned as the timestamp, regardless of whether `Transaction::SetCommitTimestamp` is called.
2) If the entry is read from the DB, the corresponding `DBIter::timestamp()` API's result is returned.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11847
Test Plan:
make all check
add some unit test
Reviewed By: ltamasi
Differential Revision: D49377359
Pulled By: jowlyzhang
fbshipit-source-id: 1511ead262ce3515ee6c6e0f829f1b69a10fe994
Summary:
With atomic_flush=true, a flush job with younger memtables wait for older memtables to be installed before install its memtables. If the flush for older memtables failed, auto-recovery starts a resume thread which can becomes stuck waiting for all background work to finish (including the flush for younger memtables). If a non-recovery flush starts now and tries to flush, it can make the situation worse since it will fail due to background error but never rollback its memtable: https://github.com/facebook/rocksdb/blob/269478ee4618283cd6d710fdfea9687157a259c1/db/db_impl/db_impl_compaction_flush.cc#L725 This prevents any future flush to pick old memtables.
A more detailed repro is in unit test.
This PR fixes this issue by
1. Ensure we rollback memtables if an atomic flush fails due to background error
2. When there is a background error, abort atomic flushes that are waiting for older memtables to be installed
3. Do not schedule non-recovery flushes when there is a background error that stops background work
There was another issue with atomic_flush=true where DB can hang during DB close, see more in #11867. The fix in this PR, specifically fix 2 above, should be enough to resolve it too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11872
Test Plan: new unit test.
Reviewed By: jowlyzhang
Differential Revision: D49556867
Pulled By: cbi42
fbshipit-source-id: 4a0210ff28a8552a99ece7fbb0f574fd24b4da3f
Summary:
Example crash seen in crash test:
```
db_stress: cache/clock_cache.cc:237: bool rocksdb::clock_cache::{anonymous}::BeginSlotInsert(const rocksdb::clock_cache::ClockHandleBasicData&, rocksdb::clock_cache::ClockHandle&, uint64_t, bool*): Assertion `*already_matches == false' failed.
```
I was intentionally ignoring `already_matches` without resetting it to false for the next call.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11877
Test Plan:
Reproducer no longer reproduces:
```
while ./cache_bench -cache_type=auto_hyper_clock_cache -threads=32 -populate_cache=0 -histograms=0 -report_problems -insert_percent=87 -lookup_insert_percent=2 -skew=10 -ops_per_thread=100 -cache_size=1000000; do echo hi; done
```
Reviewed By: cbi42
Differential Revision: D49562065
Pulled By: pdillinger
fbshipit-source-id: 941062e6eac7a4b56157925b1cf2a0b15ff9cc9d
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11870
Having a large number of merge operands applied at query time can have a significant effect on performance; therefore, applications might want limit the number of deltas for any given key. However, there is currently no way to establish the number of operands for certain types of queries. The ticker `READ_NUM_MERGE_OPERANDS` only provides aggregate (not per-read) information. The `PerfContext` counters `internal_merge_count` and `internal_merge_point_lookup_count` can be used to get this information on a per-query basis for iterators and single point lookups; however, there is no per-key breakdown for `MultiGet` type APIs. The patch addresses this issue by introducing a special kind of OK status which signals that an application-defined threshold on the number of merge operands has been exceeded for a given key. The threshold can be specified on a per-query basis using a new field in `ReadOptions`.
Reviewed By: jaykorean
Differential Revision: D49522786
fbshipit-source-id: 4265b3848d1be5ff313a3e8fb604ddf56411dd2c
Summary:
## The Problem
Mark Callaghan found a performance bug in yet-unreleased AutoHCC (which should have been found in my own testing). The observed behavior is very slow insertion performance as the table is growing into a very large structure. The root cause is the precarious combination of linear hashing (indexing into the table while allowing growth) and linear probing (for finding an empty slot to insert into). Naively combined, this is a disaster because in linear hashing, part of the table is twice as dense as first probing location as the rest. Thus, even a modest load factor like 0.6 could cause the dense part of the table to degrade to linear search. The code had a correction for this imbalance, which works in steady-state operation, but failed to account for the concentrating effect of table growth. Specifically, newly-added slots were underpopulated which allowed old slots to become over-populated and degrade to linear search, even in single-threaded operation. Here's an example:
```
./cache_bench -cache_type=auto_hyper_clock_cache -threads=1 -populate_cache=0 -value_bytes=500 -cache_size=3000000000 -histograms=0 -report_problems -ops_per_thread=20000000 -resident_ratio=0.6
```
AutoHCC: Complete in 774.213 s; Rough parallel ops/sec = 25832
FixedHCC: Complete in 19.630 s; Rough parallel ops/sec = 1018840
LRUCache: Complete in 25.842 s; Rough parallel ops/sec = 773947
## The Fix
One small change is apparently sufficient to fix the problem, but I wanted to re-optimize the whole "finding a good empty slot" algorithm to improve safety margins for good performance and to improve typical case performance.
The small change is to track the newly-added slot from Grow in Insert, when applicable, and use that slot for insertion if (a) the home slot is already occupied, and (b) the newly-added slot is empty. This appears to sufficiently load new slots while avoiding over-population of either old or new slots. See `likely_empty_slot`.
However I've also made the logic much more resilient to parts of the table becoming over-populated. I tested a variant that used double hashing instead of linear probing and found that hurt steady-state average-case performance, presumably due to loss of locality in the chains. And even conventional double hashing might not be ideally robust against density skew in the table (still present because of home location bias), because double hashing might choose a small increment that could take a long time to iterate to the under-populated part of the table.
The compromise that seems to bring the best of each approach is this: do linear probing (+1 at a time) within a small bound (chosen bound of 4 based on performance testing) and then fall back on a double-hashing variant if no slot has been found. The double-hashing variant uses a probing increment that is always close to the golden ratio, relative to the table size, so that any under-populated regions of the table can be found relatively quickly, without introducing any additional skew. And the increment is varied slightly to avoid clustering effects that could happen with a fixed increment (regardless of how big it is).
And that leaves us with one remaining problem: the double hashing increment might not be relatively prime to the table size, so the probing sequence might be a cycle that does not cover the full set of slots. To solve this we can use a technique I developed many years ago (probably also developed by others) that simply adds one (in modular arithmetic) whenever we finish a (potentially incomplete) cycle. This is a simple and reasonably efficient way to iterate over all the slots without repetition, regardless of whether the increment is not relatively prime to the table size, or even zero.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11871
Test Plan:
existing correctness tests, especially ClockCacheTest.ClockTableFull
Intended follow-up: make ClockTableFull test more complete for AutoHCC
## Performance
Ignoring old AutoHCC performance, as we established above it could be terrible. FixedHCC and LRUCache are unaffected by this change. All tests below include this change.
### Getting up to size, single thread
(same cache_bench command as above, all three run at same time)
AutoHCC: Complete in 26.724 s; Rough parallel ops/sec = 748400
FixedHCC: Complete in 19.987 s; Rough parallel ops/sec = 1000631
LRUCache: Complete in 28.291 s; Rough parallel ops/sec = 706939
Single-threaded faster than LRUCache (often / sometimes) is good. FixedHCC has an obvious advantage because it starts at full size.
### Multiple threads, steady state, high hit rate ~95%
Using `-threads=10 -populate_cache=1 -ops_per_thread=10000000` and still `-resident_ratio=0.6`
AutoHCC: Complete in 48.778 s; Rough parallel ops/sec = 2050119
FixedHCC: Complete in 46.569 s; Rough parallel ops/sec = 2147329
LRUCache: Complete in 50.537 s; Rough parallel ops/sec = 1978735
### Multiple threads, steady state, low hit rate ~50%
Change to `-resident_ratio=0.2`
AutoHCC: Complete in 49.264 s; Rough parallel ops/sec = 2029884
FixedHCC: Complete in 49.750 s; Rough parallel ops/sec = 2010041
LRUCache: Complete in 53.002 s; Rough parallel ops/sec = 1886713
Don't expect AutoHCC to be consistently faster than FixedHCC, but they are at least similar in these benchmarks.
Reviewed By: jowlyzhang
Differential Revision: D49548534
Pulled By: pdillinger
fbshipit-source-id: 263e4f4d71d0e9a7d91db3795b48fad75408822b
Summary:
This PR implements support for a three tier cache - primary block cache, compressed secondary cache, and a nvm (local flash) secondary cache. This allows more effective utilization of the nvm cache, and minimizes the number of reads from local flash by caching compressed blocks in the compressed secondary cache.
The basic design is as follows -
1. A new secondary cache implementation, ```TieredSecondaryCache```, is introduced. It keeps the compressed and nvm secondary caches and manages the movement of blocks between them and the primary block cache. To setup a three tier cache, we allocate a ```CacheWithSecondaryAdapter```, with a ```TieredSecondaryCache``` instance as the secondary cache.
2. The table reader passes both the uncompressed and compressed block to ```FullTypedCacheInterface::InsertFull```, allowing the block cache to optionally store the compressed block.
3. When there's a miss, the block object is constructed and inserted in the primary cache, and the compressed block is inserted into the nvm cache by calling ```InsertSaved```. This avoids the overhead of recompressing the block, as well as avoiding putting more memory pressure on the compressed secondary cache.
4. When there's a hit in the nvm cache, we attempt to insert the block in the compressed secondary cache and the primary cache, subject to the admission policy of those caches (i.e admit on second access). Blocks/items evicted from any tier are simply discarded.
We can easily implement additional admission policies if desired.
Todo (In a subsequent PR):
1. Add to db_bench and run benchmarks
2. Add to db_stress
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11812
Reviewed By: pdillinger
Differential Revision: D49461842
Pulled By: anand1976
fbshipit-source-id: b40ac1330ef7cd8c12efa0a3ca75128e602e3a0b
Summary:
when atomic_flush=false, there are certain cases where we try to install memtable results with already deleted SST files. This can happen when the following sequence events happen:
```
Start Flush0 for memtable M0 to SST0
Start Flush1 for memtable M1 to SST1
Flush 1 returns OK, but don't install to MANIFEST and let whoever flushes M0 to take care of it
Flush0 finishes with a retryable IOError, it rollbacks M0, (incorrectly) does not rollback M1, and deletes SST0 and SST1
Starts Flush2 for M0, it does not pick up M1 since it thought M1 is flushed
Flush2 writes SST2 and finishes OK, tries to install SST2 and SST1
Error opening SST1 since it's already deleted with an error message like the following:
IO error: No such file or directory: While open a file for random read: /tmp/rocksdbtest-501/db_flush_test_3577_4230653031040984171/000011.sst: No such file or directory
```
This happens since:
1. We currently only rollback the memtables that we are flushing in a flush job when atomic_flush=false.
2. Pending output SSTs from previous flushes are deleted since a pending file number is released whenever a flush job is finished no matter of flush status: https://github.com/facebook/rocksdb/blob/f42e70bf561d4be9b6bbe7316d1c2c0c8a3818e6/db/db_impl/db_impl_compaction_flush.cc#L3161
This PR fixes the issue by rollback these pending flushes.
There is another issue where if a new flush for new memtable starts and finishes after Flush0 finishes. Its output may also be deleted (see more in unit test). It is fixed by checking bg error status before installing a memtable result, and rollback if there is an error.
There is a more efficient fix where we just don't release the pending file output number for flushes that delegate installation. It is more efficient since it does not have to rewrite the flush output file. With the fix in this PR, we can end up with a giant file if a lot of memtables are being flushed together. However, the more efficient fix is a bit more complicated to implement (requires associating such pending file numbers with flush job/memtables) and is more risky since it changes normal flush code path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11865
Test Plan: * Added repro unit tests.
Reviewed By: anand1976
Differential Revision: D49484922
Pulled By: cbi42
fbshipit-source-id: 25b536c08f4e02e7f1d0f86571663737d2b5d53d
Summary:
This PR makes disabling the compressed secondary cache by setting capacity to 0 a bit more efficient. Previously, inserts/lookups would go to the backing LRUCache before getting rejected due to 0 capacity. With this change, insert/lookup would return from ```CompressedSecondaryCache``` itself.
Tests:
Existing tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11863
Reviewed By: akankshamahajan15
Differential Revision: D49476248
Pulled By: anand1976
fbshipit-source-id: f0f17a5e3df7d8bfc06709f8f23c1302056ba590
Summary:
When auto_readahead_size is enabled in async_io, during seek, first buffer will prefetch the data - (current block + readahead till upper_bound). There can be cases where
1. first buffer prefetched all the data till upper bound, or
2. first buffer already has the data from prev seek call
and second buffer prefetch further leading to alignment issues.
This PR fixes that assertion and second buffer won't go for prefetching if first buffer has already prefetched till upper_bound.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11852
Test Plan:
- Added new unit test that failed without this fix.
- crash tests passed locally
Reviewed By: pdillinger
Differential Revision: D49384138
Pulled By: akankshamahajan15
fbshipit-source-id: 54417e909e4d986f1e5a17dbaea059cd4962fd4d
Summary:
**Context:**
As requested, lowest level as well as a map from input file to its table properties among all input files used in table creation (if any) are exposed in `CompactionFilter::Context`.
**Summary:**
This PR contains two commits:
(1) [Refactory](https://github.com/facebook/rocksdb/pull/11857/commits/0012777f0ee829fee859eec5db11a882f450ae26) to make resonating/using what is in `Compaction:: table_properties_` easier
- Separate `Compaction:: table_properties_` into `Compaction:: input_table_properties_` and `Compaction:: output_table_properties_`
- Separate the "set input table properties" logic into `Compaction:: SetInputTableProperties()`) from `Compaction:: GetInputTableProperties`
- Call `Compaction:: SetInputTableProperties()` as soon as possible, which is right after `Compaction::SetInputVersion()`. Bundle these two functions into one `Compaction::FinalizeInputInfo()` to minimize missing one or the other
(2) [Expose more info about input files:](https://github.com/facebook/rocksdb/pull/11857/commits/6093e7dfbadd4fe1d05ad8a6ab3452d363f6d131) `CompactionFilter::Context::input_start_level/input_table_properties`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11857
Test Plan:
- Modify existing UT `
TEST_F(DBTestCompactionFilter, CompactionFilterContextManual)` to cover new logics
Reviewed By: ajkr
Differential Revision: D49402540
Pulled By: hx235
fbshipit-source-id: 469fff50fa0e5964ffa5ea8db0743f61438ea392
Summary:
**Summary:**
When row cache hits and a timestamp is being set in read_options, even though ROW_CACHE entry is hit, the return status is kNotFound.
**Cause of error:**
If timestamp is provided in readoptions, a callback for sequence number checking is registered [here](https://github.com/facebook/rocksdb/blob/8fc78a3a9e1d24ba55731b70c0c25cef0765dbc8/db/db_impl/db_impl.cc#L2112).
Hence the default value set at this [line](https://github.com/facebook/rocksdb/blob/694e49cbb1cff88fbb84a96394a0f76b7bac9e41/table/get_context.cc#L611) prevents get_context from saving value found in cache. Causing the final status to be kNotFound even though the entry exist in both cache and SST file.
**Proposed Solution**
Row cache key contains a sequence number in it. If the key for row cache lookup matches the key in cache, this cache entry should be good to be exposed to user and hence we reuse the sequence number in cache key rather than passing kMaxSequenceNumber.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11816
Reviewed By: ajkr
Differential Revision: D49419029
Pulled By: jowlyzhang
fbshipit-source-id: 6c77e9e751628d7d8e6c389f299e29a11ea824c6
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11858
The patch builds on https://github.com/facebook/rocksdb/pull/11807 and integrates the `FullMergeV3` API into the read and compaction code paths by updating and extending the logic in `MergeHelper`.
In particular, when it comes to merge inputs, the existing `TimedFullMergeWithEntity` is folded into `TimedFullMerge`, since wide-column base values are now handled the same way as plain base values (or no base values for that matter), e.g. they are passed directly to the `MergeOperator`. On the other hand, there is some new differentiation on the output side. Namely, there are now two sets of `TimedFullMerge` variants: one set for contexts where the complete merge result and its value type are needed (used by iterators and compactions), and another set where the merge result is needed in a form determined by the client (used by the point lookup APIs, where e.g. for `Get` we have to extract the value of the default column of any wide-column results).
Implementation-wise, the two sets of overloads use different visitors to process the `std::variant` produced by `FullMergeV3`. This has the benefit of eliminating some repeated code e.g. in the point lookup paths, since `TimedFullMerge` now populates the application's result object (`PinnableSlice`/`string` or `PinnableWideColumns`) directly. Moreover, within each set of variants, there is a separate overload for the no base value/plain base value/wide-column base value cases, which eliminates some repeated branching w/r/t to the type of the base value if any.
Reviewed By: jaykorean
Differential Revision: D49352562
fbshipit-source-id: c2fb9853dba3fbbc6918665bde4195c4ea150a0c
Summary:
FaultInjectionTestFS is not directly writable by default. Should set it to direct writable if there is no write fault injection.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11862
Test Plan: internal stress test failure reduces.
Reviewed By: jaykorean
Differential Revision: D49428108
Pulled By: cbi42
fbshipit-source-id: 5dfa1fbb454272a14f8228a5c496d480d7138ef1
Summary:
This PR contains two fixes:
1. disable write fault injection since it caused several other kinds of internal stress test failures. I'll try to fix those separately before enabling it again.
2. Fix segfault like
```
https://github.com/facebook/rocksdb/issues/5 0x000000000083dc43 in rocksdb::port::Mutex::Lock (this=0x30) at internal_repo_rocksdb/repo/port/port_posix.cc:80
80 internal_repo_rocksdb/repo/port/port_posix.cc: No such file or directory.
https://github.com/facebook/rocksdb/issues/6 0x0000000000465142 in rocksdb::MutexLock::MutexLock (mu=0x30, this=<optimized out>) at internal_repo_rocksdb/repo/util/mutexlock.h:37
37 internal_repo_rocksdb/repo/util/mutexlock.h: No such file or directory.
https://github.com/facebook/rocksdb/issues/7 rocksdb::FaultInjectionTestFS::DisableWriteErrorInjection (this=0x0) at internal_repo_rocksdb/repo/utilities/fault_injection_fs.h:505
505 internal_repo_rocksdb/repo/utilities/fault_injection_fs.h: No such file or directory.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11859
Test Plan: db_stress with no fault injection: `./db_stress --write_fault_one_in=0 --read_fault_one_in=0 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --sync_fault_injection=0`
Reviewed By: jaykorean
Differential Revision: D49408247
Pulled By: cbi42
fbshipit-source-id: 0ca01f20e6e81bf52af77818b50d562ef7462165
Summary:
* db_crashtest.py now may set `write_fault_one_in` to 500 for blackbox and whitebox simple test.
* Error injection only applies to writing to SST files. Flush error will cause DB to pause background operations and auto-resume. Compaction error will just re-schedule later.
* File ingestion and back up tests are updated to check if the result status is due to an injected error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11829
Test Plan:
a full round of whitebox simple and blackbox simple crash test
* `python3 ./tools/db_crashtest.py whitebox/blackbox --simple --write_fault_one_in=500`
Reviewed By: ajkr
Differential Revision: D49256962
Pulled By: cbi42
fbshipit-source-id: 68e0c9648d8e03bad39c7672b25d5500fc286d97
Summary:
Fixes https://github.com/facebook/rocksdb/issues/10257 (also see [here](https://github.com/facebook/rocksdb/pull/10355#issuecomment-1684308556)) by releasing compaction files earlier when writing to manifest in LogAndApply(). This is done by passing in a [callback](https://github.com/facebook/rocksdb/blob/ba597514309b686d8addb59616f067d5522186b7/db/version_set.h#L1199) to LogAndApply(). The new Version is created in the same critical section where compaction files are released. When compaction picker is picking compaction based on the new version, these compaction files will already be released.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11764
Test Plan:
* Existing unit tests
* A repro unit test to validate that compaction files are released: `./db_compaction_test --gtest_filter=DBCompactionTest.ReleaseCompactionDuringManifestWrite`
* `python3 ./tools/db_crashtest.py --simple whitebox` with some assertions to check compaction files are released
Reviewed By: ajkr
Differential Revision: D48742152
Pulled By: cbi42
fbshipit-source-id: 7560fd0e723a63fe692234015d2b96850f8b5d77
Summary:
before 459969e9, we were using CMake `option()` to represent `PORTABLE`. so the CMake boolean representations like ON, OFF, 0 and 1 are supported. this is also the downstream package maintainers were using before v8.3.2.
in 459969e9, this option is expanded to specify the argument of `-march` passed to compiler in order to be more flexible and hence allows user to specify CPU type directly. but in the typical use cases, user would just want to use "ON" for the best performance on the building host, and "OFF" for a portable build when it comes to a distro package maintainer.
so, in this change, let's check for the boolean representations supported by CMake.
Fixes https://github.com/facebook/rocksdb/issues/11558
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11724
Reviewed By: anand1976
Differential Revision: D48827447
Pulled By: ajkr
fbshipit-source-id: b2fef7076b2e90ad13a1fbec80e197841fa06d38
Summary:
When skip_memtable is true in MultiGetImpl, The lookup_current is always false, Causes data to be unable to be queried in super_version->current。
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11700
Reviewed By: anand1976
Differential Revision: D49342877
Pulled By: jowlyzhang
fbshipit-source-id: 270a36d049b4cb7fd151a1fa3080300310111271
Summary:
With the async_io option, the Seek happens in 2 phases. Phase 1 starts an asynchronous read on a block cache miss, and phase 2 waits for it to complete and finishes the seek. In both phases, BlockBasedTable::NewDataBlockIterator is called, which tries to lookup the block cache for the data block first before looking in the prefetch buffer. It's optimized by doing the block cache lookup only in the first phase and save some CPU.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11616
Test Plan: Added unit test
Reviewed By: jaykorean
Differential Revision: D47477887
Pulled By: akankshamahajan15
fbshipit-source-id: 0355e0a68fc0ea2eb92340ae42735afcdbcbfd79
Summary:
An internal user wants to be able to dynamically switch between Bloom and Ribbon filters, without a custom FilterPolicy. Making `filter_policy` mutable would actually make issue https://github.com/facebook/rocksdb/issues/10079 worse, because it would be a race on a pointer field, not just on scalars.
As a reasonable compromise until that is fixed, I am enabling dynamic control over Bloom vs. Ribbon choice by making
RibbonFilterPolicy::bloom_before_level mutable, and doing that safely by using an atomic.
I've also slightly tweaked the interpretation of that field so that setting it to INT_MAX really means "always Bloom."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11838
Test Plan: unit tests added/extended. crash test updated for SetOptions call and tested under TSAN with amplified probability (lower set_options_one_in).
Reviewed By: ajkr
Differential Revision: D49296284
Pulled By: pdillinger
fbshipit-source-id: e4251c077510df9a9c719876f482448c0d15402a
Summary:
- As a follow up from https://github.com/facebook/rocksdb/issues/11799, adding `Env::IOActivity::kMultiGetEntity` support to `DBImpl::MultiGetEntity()`.
## Minor Refactor
- Because both `DBImpl::MultiGet()` and `DBImpl::MultiGetEntity()` call `DBImpl::MultiGetCommon()` which later calls `DBImpl::MultiGetWithCallback()` where we check `Env::IOActivity::kMultiGet`, minor refactor was needed so that we don't check `Env::IOActivity::kMultiGet` for `DBImpl::MultiGetEntity()`.
- I still see more areas for refactoring to avoid duplicate code of checking IOActivity and setting it when Unknown, but this will be addressed separately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11842
Test Plan:
- Added the `ThreadStatus::OperationType::OP_MULTIGETENTITY` in `db_stress` to verify the pass-down IOActivity in a thread aligns with the actual activity the thread is doing.
```
python3 tools/db_crashtest.py blackbox --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10
python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10
python3 tools/db_crashtest.py blackbox --cf_consistency --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10
```
Reviewed By: ltamasi
Differential Revision: D49329575
Pulled By: jaykorean
fbshipit-source-id: 05198f1d3f92e6be3d42a3d184bacb3ab2ce6923
Summary:
This PR resolves https://github.com/facebook/rocksdb/issues/10487 & https://github.com/facebook/rocksdb/issues/10536, user code needs to call Refresh() periodically.
The main code change is to support range deletions. A range tombstone iterator uses a sequence number as upper bound to decide which range tombstones are effective. During Iterator refresh, this sequence number upper bound needs to be updated for all range tombstone iterators under DBIter and LevelIterator. LevelIterator may create new table iterators and range tombstone iterator during scanning, so it needs to be aware of iterator refresh. The code path that propagates this change is `db_iter_->set_sequence(read_seq) -> MergingIterator::SetRangeDelReadSeqno() -> TruncatedRangeDelIterator::SetRangeDelReadSeqno() and LevelIterator::SetRangeDelReadSeqno()`.
This change also fixes an issue where range tombstone iterators created by LevelIterator may access ReadOptions::snapshot, even though we do not explicitly require users to keep a snapshot alive after creating an Iterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10594
Test Plan:
* New unit tests.
* Add Iterator::Refresh(snapshot) to stress test. Note that this change only adds tests for refreshing to the same snapshot since this is the main target use case.
TODO in a following PR:
* Stress test Iterator::Refresh() to different snapshots or no snapshot.
Reviewed By: ajkr
Differential Revision: D48456896
Pulled By: cbi42
fbshipit-source-id: 2e642c04e91235cc9542ef4cd37b3c20823bd779
Summary:
**Context/Summary:**
It allows db bench reflect the default behavior of this option. For example, we recently changed its default value.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11831
Test Plan: No code change
Reviewed By: cbi42
Differential Revision: D49253690
Pulled By: hx235
fbshipit-source-id: 445d4e54f62b4b538626e301a3014d2f00849d30
Summary:
Application using rocksdb today dont have much control over the cost of reads when merge-ops are enabled, expect for waiting for compactions to kick in or using max_successive_merges hint, which only applies to memtable. This change adds Transaction::CollapseKey api giving applications the ability to request merge chain collapse on-demand, when they detect high read costs due to merges. Currently, this only supported on PessimisticTransactions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11815
Test Plan: Add a unit test
Reviewed By: ajkr
Differential Revision: D49309387
Pulled By: sarangbh
fbshipit-source-id: a1eb5cc9e3bd4b3206a36150aacead770318e3e1
Summary:
Update the logic in FilePrefetchBuffer to update `upper_bound_offset_` during reseek. During Reseek, `iterate_upper_bound` can be changed dynamically. So added an API to update that in FilePrefetchBuffer.
Added unit test to confirm the behavior.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11775
Test Plan:
- Check stress tests in case there is any failure after this diff.
- make crash_test -j32 with auto_readahead_size=1 passed locally
Reviewed By: anand1976
Differential Revision: D48815177
Pulled By: akankshamahajan15
fbshipit-source-id: 5f44fbb3af06c86a1c38f139c5fa4543891837f4
Summary:
When `MultiGet` acquires `SuperVersion` via locking the db mutex and get the current `ColumnFamilyData::super_version_`, its corresponding cleanup logic is not correctly done.
It's currently doing this:
`MultiGetColumnFamilyData::cfd->GetSuperVersion().Unref()`
This operates on the most recent `SuperVersion` without locking db mutex , which is not thread safe by itself. And this unref operation is intended for the originally acquired `SuperVersion` instead of the current one. Because a race condition could happen where a new `SuperVersion` is installed in between this `MultiGet`'s ref and unref. When this race condition does happen, it's not sufficient to just unref the `SuperVersion`, `DBImpl::CleanupSuperVersion` should be called instead to properly clean up the `SuperVersion` had this `MultiGet` call be its last reference holder.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11830
Test Plan:
`make all check`
Added a unit test that would originally fail
Reviewed By: ltamasi
Differential Revision: D49287715
Pulled By: jowlyzhang
fbshipit-source-id: 8353636ee11b2e90d85c677a96a92360072644b0
Summary:
`GetEntity` API support for ReadOnly DB and Secondary DB.
- Introduced `GetImpl()` with `GetImplOptions` in `db_impl_readonly` and refactored current `Get()` logic into `GetImpl()` so that look up logic can be reused for `GetEntity()` (Following the same pattern as `DBImpl::Get()` and `DBImpl::GetEntity()`)
- Introduced `GetImpl()` with `GetImplOptions` in `db_impl_secondary` and refactored current `GetImpl()` logic. This is to make `DBImplSecondary::Get/GetEntity` consistent with `DBImpl::Get/GetEntity` and `DBImplReadOnly::Get/GetEntity`
- `GetImpl()` in `db_impl` is now virtual. both `db_impl_readonly` and `db_impl_secondary`'s `Get()` override are no longer needed since all three dbs now have the same `Get()` which calls `GetImpl()` internally.
- `GetImpl()` in `DBImplReadOnly` and `DBImplSecondary` now pass in `columns` instead of `nullptr` in lookup functions like `memtable->get()`
- Introduced `GetEntity()` API in `DBImplReadOnly` and `DBImplSecondary` which simply calls `GetImpl()` with `columns` set in `GetImplOptions`.
- Introduced `Env::IOActivity::kGetEntity` and set read_options.io_activity to `Env::IOActivity::kGetEntity` for `GetEntity()` operations (in db_impl)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11799
Test Plan:
**Unit Tests**
- Added verification in `DBWideBasicTest::PutEntity` by Reopening DB as ReadOnly with the same setup.
- Added verification in `DBSecondaryTest::ReopenAsSecondary` by calling `PutEntity()` and `GetEntity()` on top of existing `Put()` and `Get()`
- `make -j64 check`
**Crash Tests**
- `python3 tools/db_crashtest.py blackbox --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --inter
val=10`
- `python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 `
- `python3 tools/db_crashtest.py blackbox --cf_consistency --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --inter
val=10`
Reviewed By: ltamasi
Differential Revision: D49037040
Pulled By: jaykorean
fbshipit-source-id: a0648253ded6e91af7953de364ed3c6bf163626b
Summary:
**Context/Summary:** `rocksdb.file.read.db.open.micros` is landed in 8.3 but not 8.6. It was included in the HISTORY due to an error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11839
Test Plan: no code change; Will cherry pick this to 8.6 branch when landed.
Reviewed By: anand1976
Differential Revision: D49294250
Pulled By: hx235
fbshipit-source-id: b2ac10758a15eadd5c129d80e93e1c3d0aa569cb
Summary:
When executing ClipColumnFamily, if end_key is equal to largest_user_key in a file, this key will not be deleted. So we need to change less than to less than or equal to
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11811
Reviewed By: ajkr
Differential Revision: D49206936
Pulled By: cbi42
fbshipit-source-id: 3e8bcb7b52040a9b4d1176de727616cc298d3445
Summary:
As discussed in https://github.com/facebook/rocksdb/issues/11730 , this PR tracks the effective `full_history_ts_low` per SuperVersion and update existing sanity checks for `ReadOptions.timestamp >= full_history_ts_low` to use this per SuperVersion `full_history_ts_low` instead. This also means the check is moved to happen after acquiring SuperVersion.
There are two motivations for this: 1) Each time `full_history_ts_low` really come into effect to collapse history, a new SuperVersion is always installed, because it would involve either a Flush or Compaction, both of which change the LSM tree shape. We can take advantage of this to ensure that as long as this sanity check is passed, even if `full_history_ts_low` can be concurrently increased and collapse some history above the requested `ReadOptions.timestamp`, a read request won’t have visibility to that part of history through this SuperVersion that it already acquired. 2) the existing sanity check uses `ColumnFamilyData::GetFullHistoryTsLow` without locking the db mutex, which is the mutex all `IncreaseFullHistoryTsLow` operation is using when mutating this field. So there is a race condition. This also solve the race condition on the read path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11784
Test Plan:
`make all check`
// Checks success scenario really provide the read consistency attribute as mentioned above.
`./db_with_timestamp_basic_test --gtest_filter=*FullHistoryTsLowSanityCheckPassReadIsConsistent*`
// Checks failure scenario cleans up SuperVersion properly.
`./db_with_timestamp_basic_test --gtest_filter=*FullHistoryTsLowSanityCheckFail*`
`./db_secondary_test --gtest_filter=*FullHistoryTsLowSanityCheckFail*`
`./db_readonly_with_timestamp_test --gtest_filter=*FullHistoryTsLowSanitchCheckFail*`
Reviewed By: ltamasi
Differential Revision: D48894795
Pulled By: jowlyzhang
fbshipit-source-id: 1f801fe8e1bc8e63ca76c03cbdbd0974e5ff5bf6
Summary:
**Context/Summary:**
A size amp compaction can select and prevent a large number of L0 files from being selected by other compaction. If such compaction is running long or being queued behind, these L0 files will exist for long. With a few more flushes, we can run into write stop triggered by # L0 files. We've seen this happen on a host with many DBs sharing same thread pool, each of these DBs submits a size amp compaction with (110-180)+ files to the pool upon reopen and with a few more flushes, they hit the 200 L0 write stop condition.
The idea is to exclude some L0 input files in size amp compaction that are harmless to size amp reduction but improve the situation described above.
The exclusion algorithm is in `MightExcludeNewL0sToReduceWriteStop()` with two elements:
1. #L0 to exclude + (level0_stop_writes_trigger - num_l0_input_pre_exclusion) should be in the range of [min_merge_width, max_merge_width].
- This is to ensure we are excluding enough L0 input files but not too many to be qualified to picked for another compaction along with the incoming future L0 files before write stop.
2. Based on (1), further constrain #L0 to exclude based on the post-exclusion compaction score. The goal is to ensure our exclusion will not disqualify the size amp compaction from being a size amp compaction after exclusion.
**Tets plan:** New unit test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11749
Reviewed By: ajkr
Differential Revision: D48850631
Pulled By: hx235
fbshipit-source-id: 2c321036e164087c36319dd5645cbbf6b6152092
Summary:
Existing compaction statistics are `COMPACTION_TIME` and `COMPACTION_CPU_TIME` which are histogram and are logged at the end of a compaction. The new statistics `COMPACTION_CPU_TOTAL_TIME` is for cumulative total compaction time which is updated regularly during a compaction. This allows user to more closely track compaction cpu usage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11741
Test Plan: * new unit test `DBTestWithParam.CompactionTotalTimeTest`
Reviewed By: ajkr
Differential Revision: D48608094
Pulled By: cbi42
fbshipit-source-id: b597109f3e4bf2237fb5a216b6fd036e5363b4c0
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11823
Similarly to https://github.com/facebook/rocksdb/pull/11813, the patch is a small refactoring that eliminates some copy-paste around sorting the columns of entities by column name.
Reviewed By: jaykorean
Differential Revision: D49195504
fbshipit-source-id: d48c9f290e3203f838cc5949856c469ecf730008
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11807
For now, RocksDB has limited support for using merge with wide columns: when a bunch of merge operands have to be applied to a wide-column base value, RocksDB currently passes only the value of the default column to the application's `MergeOperator`, which means there is no way to update any other columns during a merge. As a first step in making this more general, the patch adds a new API `FullMergeV3` to `MergeOperator`.
`FullMergeV3`'s interface enables applications to receive a plain, wide-column, or non-existent base value as merge input, and to produce a new plain value, a new wide-column value, or an existing operand as merge output. Note that there are no limitations on the column names and values if the merge result is a wide-column entity. Also, the interface is general in the sense that it makes it possible e.g. for a merge that takes a plain base value and some deltas to produce a wide-column entity as a result.
For backward compatibility, the default implementation of `FullMergeV3` falls back to `FullMergeV2` and implements the current logic where merge operands are applied to the default column of the base entity and any other columns are unchanged. (Note that with `FullMergeV3` in the `MergeOperator` interface, this behavior will become customizable.)
This patch just introduces the new API and the default backward compatible implementation. I plan to integrate `FullMergeV3` into the query and compaction logic in subsequent diffs.
Reviewed By: jaykorean
Differential Revision: D49117253
fbshipit-source-id: 109e016f25cd130fc504790818d927bae7fec6bd
Summary:
During Seek, the iterator seeks every file on L0. In async_io, it submit the requests to seek on every file on L0 asynchronously using RocksDB FilePrefetchBuffer.
However, FilePrefetchBuffer does alignment and reads extra bytes then needed that can increase the throughput.
In case of non direct io, the alignment can be avoided.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11793
Test Plan:
- Added a unit test that fails without this PR.
- make crash_test -j32 completed successfully
Reviewed By: anand1976
Differential Revision: D48985051
Pulled By: akankshamahajan15
fbshipit-source-id: 2d130a9e7c3df9c4fcd0408406e6277ab75a4389
Summary:
This function uses racing reads for heuristic performance improvement. My change in https://github.com/facebook/rocksdb/issues/11792 only worked for clang, not gcc, and gcc does not accurately handle TSAN suppressions. I would have to mark much more code as suppressed than I want to.
So I've taken a different approach: TSAN build does not use the racing reads but substitutes random results, as an extra test that a "correct" value is not needed for correct overall behavior.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11806
Test Plan: manual TSAN builds & tests with cache_bench
Reviewed By: ajkr
Differential Revision: D49100115
Pulled By: pdillinger
fbshipit-source-id: d6d0dfb796d710b953212dd3fc171b6e88fadea1
Summary:
This is for fb internal use. Please see the comment in internal Phabricator for details.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11803
Reviewed By: hx235
Differential Revision: D49065093
Pulled By: jaykorean
fbshipit-source-id: acd71d7c1163f3c95c59c427caf944dacfe58ef6
Summary:
Tests a scenario where range tombstone reseek used to cause MergingIterator to discard non-ok status.
Ran on main without https://github.com/facebook/rocksdb/issues/11786:
```
./db_range_del_test --gtest_filter="*RangeDelReseekAfterFileReadError*"
Note: Google Test filter = *RangeDelReseekAfterFileReadError*
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBRangeDelTest
[ RUN ] DBRangeDelTest.RangeDelReseekAfterFileReadError
db/db_range_del_test.cc:3577: Failure
Value of: iter->Valid()
Actual: true
Expected: false
[ FAILED ] DBRangeDelTest.RangeDelReseekAfterFileReadError (64 ms)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11790
Reviewed By: ajkr
Differential Revision: D48972869
Pulled By: cbi42
fbshipit-source-id: b1a71867533b0fb60af86f8ce8a9e391ba84dd57
Summary:
https://github.com/facebook/rocksdb/issues/11789 added error injection during compaction to db_stress. However, error injection was not disabled after compaction completion, which resulted in some test failures due to stale errors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11798
Reviewed By: cbi42
Differential Revision: D49022821
Pulled By: anand1976
fbshipit-source-id: 3cbfe18d55bee393697e063d05e7a7a7f88b7635
Summary:
Some repro unit tests for the bug fixed in https://github.com/facebook/rocksdb/pull/11782.
Ran on main without https://github.com/facebook/rocksdb/pull/11782:
```
./db_compaction_test --gtest_filter='*ErrorWhenReadFileHead'
Note: Google Test filter = *ErrorWhenReadFileHead
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBCompactionTest
[ RUN ] DBCompactionTest.ErrorWhenReadFileHead
db/db_compaction_test.cc:10105: Failure
Value of: s.IsIOError()
Actual: false
Expected: true
[ FAILED ] DBCompactionTest.ErrorWhenReadFileHead (3960 ms)
./db_iterator_test --gtest_filter="*ErrorWhenReadFile*"
Note: Google Test filter = *ErrorWhenReadFile*
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBIteratorTest
[ RUN ] DBIteratorTest.ErrorWhenReadFile
db/db_iterator_test.cc:3399: Failure
Value of: (iter->status()).ok()
Actual: true
Expected: false
[ FAILED ] DBIteratorTest.ErrorWhenReadFile (280 ms)
[----------] 1 test from DBIteratorTest (280 ms total)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11788
Reviewed By: ajkr
Differential Revision: D48940284
Pulled By: cbi42
fbshipit-source-id: 06f3c5963f576db3f85d305ffb2745ee13d209bb
Summary:
Currently, rocksdb users would use the event listener to catch the compaction/flush event and log them if any. But now the reason is an integer type instead of a human-readable string, so we would like to convert them into a human-readable string.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11778
Reviewed By: jaykorean
Differential Revision: D49012934
Pulled By: ajkr
fbshipit-source-id: a4935b95d70c1be02aec65da7bf1c98a8cf8b933
Summary:
There was a `#include "port/lang.h"` situated inside an `extern "C" {` which just started causing the header to be unusuable in some contexts. This was a regression on the CircleCI job build-linux-unity-and-headers in https://github.com/facebook/rocksdb/issues/11792
The include, and another like it, now appears obsolete so removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11797
Test Plan: local `make check-headers` and `make`, CI
Reviewed By: jaykorean
Differential Revision: D48976826
Pulled By: pdillinger
fbshipit-source-id: 131d66969e045f2ded0f8936924ee30c9ef2655a
Summary:
- Fixed misspellings of "inject"
- Made user read errors retryable when `FLAGS_inject_error_severity == 1`
- Added compaction read errors when `FLAGS_read_fault_one_in > 0`. These are always retryable so that the DB will keep accepting writes
- Reenabled setting `compaction_readahead_size` in crash test. The reason for disabling it was to "keep the test clean", which is not a good enough reason to skip testing it
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11789
Test Plan:
With https://github.com/facebook/rocksdb/issues/11782 reverted, reproduced the bug:
- Build: `make -j56 db_stress`
- Command: `TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --interval=10 --max_key=1000000`
- Output:
```
stderr has error message:
***put or merge error: Corruption: Compaction number of input keys does not match number of keys processed.***
```
Reviewed By: cbi42
Differential Revision: D48939994
Pulled By: ajkr
fbshipit-source-id: a1efb799efecdfd5d9cfd185e4a6321db8fccfbb
Summary:
[Apache Kvrocks](https://github.com/apache/kvrocks) is an open-source distributed key-value NoSQL database built on top of RocksDB. It serves as a cost-saving and capacity-increasing alternative drop-in replacement for Redis
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11779
Reviewed By: ajkr
Differential Revision: D48872257
Pulled By: cbi42
fbshipit-source-id: 507f67d69b826607a1464a22ec7c60abe11c5124
Summary:
This change add an experimental next-generation HyperClockCache (HCC) with automatic sizing of the underlying hash table. Both the existing version (stable) and the new version (experimental for now) of HCC are available depending on whether an estimated average entry charge is provided in HyperClockCacheOptions.
Internally, we call the two implementations AutoHyperClockCache (new) and FixedHyperClockCache (existing). The performance characteristics and much of the underlying logic are similar enough that AutoHCC is likely to make FixedHCC obsolete, and so it's best considered an evolution of the same technology or solution rather than an alternative. More specifically, both implementations share essentially the same logic for managing the state of individual entries in the cache, including metadata for reference counting and counting clocks for eviction. This metadata, which I like to call the "low-level HCC protocol," includes a read-write lock on entries, but relaxed consistency requirements on the cache (e.g. allowing rare duplication) means high-level cache operations never wait for these low-level per-entry locks. FixedHCC is fully wait-free.
AutoHCC is different in how entries are indexed into an efficient hash table. AutoHCC is "essentially wait-free" as there is no pattern of typical high-level operations on a large cache that can lead to one thread waiting on another to complete some work, though it can happen in some unusual/unlucky cases, or atypical uses such as erasing specific cache keys. Table growth and entry reclamation is more complex in AutoHCC compared to FixedHCC, so uses some localized locking to manage that. AutoHCC uses linear hashing to grow the table as needed, with low latency and to a precise size. AutoHCC depends on anonymous mmap support from the OS (currently verified working on Linux, MacOS, and Windows) to allow the array underlying a hash table to grow in place without wasting resident memory on space reserved but unused. AutoHCC uses a form of chaining while FixedHCC uses open addressing and double hashing.
More specifics:
* In developing this PR, a rare availability bug (minor) was noticed in the existing HCC implementation of Release()+erase_if_last_ref, which is now inherited into AutoHCC. Fixing this without a performance regression will not be simple, so is left for follow-up work.
* Some existing unit tests required adjustment of operational parameters or conditions to work with the new behaviors of AutoHCC. A number of bugs were found and fixed in the validation process, including getting unit tests in good working order.
* Added an option to cache_bench, `-degenerate_hash_bits` for correctness stress testing described below. For this, the tool uses the reverse-engineered hash function for HCC to generate keys in which the specified number of hash bits, in critical positions, have a fixed value. Essentially each degenerate hash bit will half the number of chain heads utilized and double the average chain length.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11738
Test Plan:
unit tests updated, and already added to db crash test. Also
## Correctness
The code includes generous assertions to check for unexpected states, especially at destruction time, so should be able to detect critical concurrency bugs. Less serious "availability bugs" in which cache data is hidden or cleanly lost are more difficult to detect, but also less scary for data correctness (as long as performance is good and the design is sound).
In average operation, the structure is extremely low stress and low contention (see next section) so stressing the corner case logic requires artificially stressing the operating conditions. First, we keep the structure small to increase the number of threads hitting the same chain or entry, and just one cache shard. Second, we artificially degrade the hashing so that chains are much longer than typical, using the new `-degenerate_hash_bits` option to cache_bench. Third, we re-create the structure from scratch frequently in order to exercise the Grow logic repeatedly and to get the benefit of the consistency checks in the structure's destructor in debug builds. For cache_bench this also means disabling the single-threaded "populate cache" step (normally used for steady state performance testing). And of course use many more threads than cores to have many preemptions.
An effective test for working out bugs was this (using debug build of course):
```
while ./cache_bench -cache_type=auto_hyper_clock_cache -histograms=0 -cache_size=8000000 -threads=100 -populate_cache=0 -ops_per_thread=10000 -degenerate_hash_bits=6 -num_shard_bits=0; do :; done
```
Or even smaller cases. This setup has around 27 utilized chains, with around 35 entries each, and yield-waits more than 1 million times per second (very high contention; see next section). I have let this run for hours searching for any lingering issues.
I've also run cache_bench under ASAN, UBSAN, and TSAN.
## Essentially wait free
There is a counter for number of yield() calls when one thread is waiting on another. When we pre-populate the structure in a single thread,
```
./cache_bench -cache_type=auto_hyper_clock_cache -histograms=0 -populate_cache=1 -ops_per_thread=200000 2>&1 | grep Yield
```
We see something on the order of 1 yield call per second across 16 threads, even when we load the system other other jobs (parallel compilation). With -populate_cache=0, there are more yield opportunities with parallel table growth. On an otherwise unloaded system, we still see very small (single digit) yield counts, with a chance of getting into the thousands, and getting into 10s of thousands per second during table growth phase if the system is loaded with other jobs. However, I am not worried about this if performance is still good (see next section).
## Overall performance
Although cache_bench initially suggested performance very close to FixedHCC, there was a very noticeable performance hit under a db_bench setup like used in validating https://github.com/facebook/rocksdb/issues/10626. Much of the difference has been reduced by optimizing Lookup with a "naive" pass that will almost always find entries quickly, and only falling back to the careful Lookup algorithm when not found in the first pass.
Setups (chosen to be sensitive to block cache performance), and compiled with USE_CLANG=1 JEMALLOC=1 PORTABLE=0 DEBUG_LEVEL=0:
```
TEST_TMPDIR=/dev/shm base/db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16
```
### No regression on FixedHCC
Running before & after builds at the same time on a 48 core machine.
```
TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -benchmarks=readrandom[-X10],block_cache_entry_stats,cache_report_problems -readonly -num=30000000 -bloom_bits=16 -cache_index_and_filter_blocks=1 -cache_size=610000000 -duration 20 -threads=24 -cache_type=fixed_hyper_clock_cache -seed=1234
```
Before:
readrandom [AVG 10 runs] : 847234 (± 8150) ops/sec; 59.2 (± 0.6) MB/sec
703MB max RSS
After:
readrandom [AVG 10 runs] : 851021 (± 7929) ops/sec; 59.5 (± 0.6) MB/sec
706MB max RSS
Probably no material difference.
### Single-threaded performance
Using `[-X2]` and `-threads=1` and `-duration=30`, running all three at the same time:
lru_cache: 55100 ops/sec, then 55862 ops/sec (627MB max RSS)
fixed_hyper_clock_cache: 60496 ops/sec, then 61231 ops/sec (626MB max RSS)
auto_hyper_clock_cache: 47560 ops/sec, then 56081 ops/sec (626MB max RSS)
So AutoHCC has more ramp-up cost in the first pass as the cache grows to the appropriate size. (In single-threaded operation, the parallelizability and per-op low latency of table growth is overall slower.) However, once up to size, its performance is comparable to LRUCache. FixedHCC's lean operations still win overall when a good estimate is available.
If we look at HCC table stats, we can see that this configuration is not favorable to AutoHCC (and I have verified that other memory sizes do not yield substantially different results, until shards are under-sized for the full filters):
FixedHCC:
Slot occupancy stats: Overall 47% (124991/262144), Min/Max/Window = 28%/64%/500, MaxRun{Pos/Neg} = 17/22
AutoHCC:
Slot occupancy stats: Overall 59% (125781/209682), Min/Max/Window = 43%/82%/500, MaxRun{Pos/Neg} = 76/16
Head occupancy stats: Overall 43% (92259/209682), Min/Max/Window = 24%/74%/500, MaxRun{Pos/Neg} = 19/26
Entries at home count: 53350
FixedHCC configuration is relatively good for speed, and not ideal for space utilization. As is typical, AutoHCC has tighter control on metadata usage (209682 x 64 bytes rather than 262144 x 64 bytes), and the higher load factor is slightly worse for speed. LRUCache also has more metadata usage, at 199680 x 96 bytes of tracked metadata (plus roughly another 10% of that untracked in the head pointers), and that metadata is subject to fragmentation.
### Parallel performance, high hit rate
Now using `[-X10]` and `-threads=10`, all three at the same time
lru_cache: [AVG 10 runs] : 263629 (± 1425) ops/sec; 18.4 (± 0.1) MB/sec
655MB max RSS, 97.1% cache hit rate
fixed_hyper_clock_cache: [AVG 10 runs] : 479590 (± 8114) ops/sec; 33.5 (± 0.6) MB/sec
651MB max RSS, 97.1% cache hit rate
auto_hyper_clock_cache: [AVG 10 runs] : 418687 (± 5915) ops/sec; 29.3 (± 0.4) MB/sec
657MB max RSS, 97.1% cache hit rate
Even with just 10-way parallelism for each cache (though 30+/48 cores busy overall), LRUCache is already showing performance degradation, while AutoHCC is in the neighborhood of FixedHCC. And that brings us to the question of how AutoHCC holds up under extreme parallelism, so now independent runs with `-threads=100` (overloading 48 cores).
lru_cache: 438613 ops/sec, 827MB max RSS
fixed_hyper_clock_cache: 1651310 ops/sec, 812MB max RSS
auto_hyper_clock_cache: 1505875 ops/sec, 821MB max RSS (Yield count: 1089 over 30s)
Clearly, AutoHCC holds up extremely well under extreme parallelism, even closing some of the modest performance gap with FixedHCC.
### Parallel performance, low hit rate
To get down to roughly 50% cache hit rate, we use `-cache_index_and_filter_blocks=0 -cache_size=1650000000` with `-threads=10`. Here the extra cost of running counting clock eviction, especially on the chains of AutoHCC, are evident, especially with the lower contention of cache_index_and_filter_blocks=0:
lru_cache: 725231 ops/sec, 1770MB max RSS, 51.3% hit rate
fixed_hyper_clock_cache: 638620 ops/sec, 1765MB max RSS, 50.2% hit rate
auto_hyper_clock_cache: 541018 ops/sec, 1777MB max RSS, 50.8% hit rate
Reviewed By: jowlyzhang
Differential Revision: D48784755
Pulled By: pdillinger
fbshipit-source-id: e79813dc087474ac427637dd282a14fa3011a6e4
Summary:
This happens in (Compaction)MergingIterator layer, and can cause data loss during compaction or read/scan return incorrect result
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11782
Reviewed By: ajkr
Differential Revision: D48880575
Pulled By: cbi42
fbshipit-source-id: 2294ad284a6d653d3674bebe55380f12ee4b645b
Summary:
**Context/Summary:**
After https://github.com/facebook/rocksdb/pull/11631, we rely on `compaction_readahead_size` for how much to read ahead for compaction read under non-direct IO case. https://github.com/facebook/rocksdb/pull/11658 therefore also sanitized 0 `compaction_readahead_size` to 2MB under non-direct IO, which is consistent with the existing sanitization with direct IO.
However, this makes disabling compaction readahead impossible as well as add one more scenario to the inconsistent effects between `Options.compaction_readahead_size=0` during DB open and `SetDBOptions("compaction_readahead_size", "0")` .
- `SetDBOptions("compaction_readahead_size", "0")` will disable compaction readahead as its logic never goes through sanitization above while `Options.compaction_readahead_size=0` will go through sanitization.
Therefore we decided to do this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11762
Test Plan: Modified existing UTs to cover this PR
Reviewed By: ajkr
Differential Revision: D48759560
Pulled By: hx235
fbshipit-source-id: b3f85e58bda362a6fa1dc26bd8a87aa0e171af79
Summary:
For a SST file that uses user-defined timestamp aware comparators, if a lower or upper bound is set, sst_dump tool doesn't handle it well. This PR adds support for that. While working on this `MaybeAddTimestampsToRange` is moved to the udt_util.h file to be shared.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11757
Test Plan:
make all check
for changes in db_impl.cc and db_impl_compaction_flush.cc
for changes in sst_file_dumper.cc, I manually tested this change handles specifying bounds for UDT use cases. It probably should have a unit test file eventually.
Reviewed By: ltamasi
Differential Revision: D48668048
Pulled By: jowlyzhang
fbshipit-source-id: 1560465f40e44668d6d82a7439fe9012be0e74a8
Summary:
wide_columns can now be pretty-printed in the following commands
- `./ldb dump_wal`
- `./ldb dump`
- `./ldb idump`
- `./ldb dump_live_files`
- `./ldb scan`
- `./sst_dump --command=scan`
There are opportunities to refactor to reduce some nearly identical code. This PR is initial change to add wide column support in `ldb` and `sst_dump` tool. More PRs to come for the refactor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11754
Test Plan:
**New Tests added**
- `WideColumnsHelperTest::DumpWideColumns`
- `WideColumnsHelperTest::DumpSliceAsWideColumns`
**Changes added to existing tests**
- `ExternalSSTFileTest::BasicMixed` added to cover mixed case (This test should have been added in https://github.com/facebook/rocksdb/issues/11688). This test does not verify the ldb or sst_dump output. This test was used to create test SST files having some rows with wide columns and some without and the generated SST files were used to manually test sst_dump_tool.
- `createSST()` in `sst_dump_test` now takes `wide_column_one_in` to add wide column value in SST
**dump_wal**
```
./ldb dump_wal --walfile=/tmp/rocksdbtest-226125/db_wide_basic_test_2675429_2308393776696827948/000004.log --print_value --header
```
```
Sequence,Count,ByteSize,Physical Offset,Key(s) : value
1,1,59,0,PUT_ENTITY(0) : 0x:0x68656C6C6F 0x617474725F6E616D6531:0x666F6F 0x617474725F6E616D6532:0x626172
2,1,34,42,PUT_ENTITY(0) : 0x617474725F6F6E65:0x74776F 0x617474725F7468726565:0x666F7572
3,1,17,7d,PUT(0) : 0x7468697264 : 0x62617A
```
**idump**
```
./ldb --db=/tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/ idump
```
```
'first' seq:1, type:22 => :hello attr_name1:foo attr_name2:bar
'second' seq:2, type:22 => attr_one:two attr_three:four
'third' seq:3, type:1 => baz
Internal keys in range: 3
```
**SST Dump from dump_live_files**
```
./ldb --db=/tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/ compact
./ldb --db=/tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/ dump_live_files
```
```
...
==============================
SST Files
==============================
/tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/000013.sst level:1
------------------------------
Process /tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/000013.sst
Sst file format: block-based
'first' seq:0, type:22 => :hello attr_name1:foo attr_name2:bar
'second' seq:0, type:22 => attr_one:two attr_three:four
'third' seq:0, type:1 => baz
...
```
**dump**
```
./ldb --db=/tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/ dump
```
```
first ==> :hello attr_name1:foo attr_name2:bar
second ==> attr_one:two attr_three:four
third ==> baz
Keys in range: 3
```
**scan**
```
./ldb --db=/tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/ scan
```
```
first : :hello attr_name1:foo attr_name2:bar
second : attr_one:two attr_three:four
third : baz
```
**sst_dump**
```
./sst_dump --file=/tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/000013.sst --command=scan
```
```
options.env is 0x7ff54b296000
Process /tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/000013.sst
Sst file format: block-based
from [] to []
'first' seq:0, type:22 => :hello attr_name1:foo attr_name2:bar
'second' seq:0, type:22 => attr_one:two attr_three:four
'third' seq:0, type:1 => baz
```
Reviewed By: ltamasi
Differential Revision: D48837999
Pulled By: jaykorean
fbshipit-source-id: b0280f0589d2b9716bb9b50530ffcabb397d140f
Summary:
This PR adds a missing piece for the UDT in memtable only feature, which is to automatically increase `full_history_ts_low` when flush happens during recovery.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11774
Test Plan:
Added unit test
make all check
Reviewed By: ltamasi
Differential Revision: D48799109
Pulled By: jowlyzhang
fbshipit-source-id: fd681ed66d9d40904ca2c919b2618eb692686035
Summary:
the value of `done` is always false here, so the sub-condition `!done` will always be true and the check can be removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11746
Reviewed By: anand1976
Differential Revision: D48656845
Pulled By: ajkr
fbshipit-source-id: 523ba3d07b3af7880c8c8ccb20442fd7c0f49417
Summary:
Having a synthetic implementation of `TimedWait()` in `SystemClock` will allow us to add `SyncPoint`s while mutex is released, which was previously impossible since the lock was released and reacquired all within `pthread_cond_timedwait()`. Additionally, integrating `TimedWait()` with `MockSystemClock` allows us to cleanup some workarounds in the test code. In this PR I only cleaned up the `GenericRateLimiter` test workaround.
This is related to the intended follow-up mentioned in https://github.com/facebook/rocksdb/issues/7101's description. There are a couple differences:
(1) This PR does not include removing the particular workaround that initially motivated it. Actually, the `Timer` class uses `InstrumentedCondVar`, so the interface introduced here is inadequate to remove that workaround. On the bright side, the interface introduced in this PR can be changed as needed since it can neither be used nor extended externally, due to using forward-declared `port::CondVar*` in the interface.
(2) This PR only makes the change in `SystemClock` not `Env`. Older revisions of this PR included `Env::TimedWait()` and `SpecialEnv::TimedWait()`; however, since they were unused it probably makes sense to defer adding them until when they are needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11753
Reviewed By: pdillinger
Differential Revision: D48654995
Pulled By: ajkr
fbshipit-source-id: 15e19f2454b64d4ec7f50e328691c66ca9911122
Summary:
when a key is recorded for locking in a pessimistic transaction, the key is first looked up in a map, and then inserted into the map if it was not already contained.
this can be simplified to an unconditional insert. in the ideal case that all keys are unique, this saves all the find() operations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11743
Reviewed By: anand1976
Differential Revision: D48656798
Pulled By: ajkr
fbshipit-source-id: d0150de2db757e0c05e1797cfc24380790c71276
Summary:
The user-defined timestamps feature only enforces that for the same key, user-defined timestamps should be non-decreasing. For the user-defined timestamps in memtable only feature, during flush, we check the user-defined timestamps in each memtable to examine if the data is considered expired with regard to `full_history_ts_low`. In this process, it's assuming that a newer memtable should not have smaller user-defined timestamps than an older memtable. This check however is enforcing ordering of user-defined timestamps across keys, as apposed to the vanilla UDT feature, that only enforce ordering of user-defined timestamps for the same key.
This more strict user-defined timestamp ordering requirement could be an issue for secondary instances where commits can be out of order. And after thinking more about it, this requirement is really an overkill to keep the invariants of `full_history_ts_low` which are:
1) users cannot read below `full_history_ts_low`
2) users cannot write at or below `full_history_ts_low`
3) `full_history_ts_low` can only be increasing
As long as RocksDB enforces these 3 checks, we can prohibit inconsistent read that returns a different value. And these three checks are covered in existing APIs.
So this PR removes the extra checks in the UDT in memtable only feature that requires user-defined timestamps to be non decreasing across keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11732
Reviewed By: ltamasi
Differential Revision: D48541466
Pulled By: jowlyzhang
fbshipit-source-id: 95453c6e391cbd511c0feab05f0b11c312d17186
Summary:
Fix seg fault in auto_readahead_size with async_io when readahead_size = 0. If readahead_size is trimmed and is 0, it's not eligible for further prefetching and should return.
Error occured when the first buffer already contains data and it goes for prefetching in second buffer leading to assertion failure -
`assert(roundup_len1 >= alignment);
`
because roundup_len1 = length + readahead_size.
length is 0 and readahead_size is also 0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11769
Test Plan: Reproducible with db_stress with async_io enabled.
Reviewed By: anand1976
Differential Revision: D48743031
Pulled By: akankshamahajan15
fbshipit-source-id: 0e08c41f862f6287ca223fbfaf6cd42fc97b3c87
Summary:
`VersionBuilderMap` type alias definition seem unused.
If this PR can be compiled fine then the alias is probably not needed anymore.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11286
Reviewed By: jaykorean
Differential Revision: D48656747
Pulled By: ajkr
fbshipit-source-id: ac8554922aead7dc3d24fe7e6544a4622578c514
Summary: Python3 makes the use of `(object)` in class inheritance unnecessary. Let's modernize our code by eliminating this.
Reviewed By: itamaro
Differential Revision: D48673915
fbshipit-source-id: a1a6ae8572271eb2898b748c8216ea68e362f06a
Summary:
Fix seg fault in auto_readahead_size
```
db_stress:
internal_repo_rocksdb/repo/table/block_based/partitioned_index_iterator.h:70: virtual rocksdb::IndexValue rocksdb::PartitionedIndexIterator::value() const: Assertion `Valid()' failed.
```
During seek, after calculating readahead_size, db_stress can inject IOError resulting in failure to index_iter_->Seek and making index_iter_ invalid.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11761
Test Plan: Reproducible locally and passed with this fix
Reviewed By: anand1976
Differential Revision: D48696248
Pulled By: akankshamahajan15
fbshipit-source-id: 2be43bf56ad0fc2f95f9093c19c9a1b15a716091
Summary:
* Add some options to cache_bench to use JemallocNodumpAllocator
* Make num_shard_bits option use and report cache-specific defaults
* Add a usleep option to sleep between operations, for simulating a workload with more CPU idle/wait time.
* Use const& for JemallocAllocatorOptions, to improve API usability (e.g. can bind to temporary `{}`)
* InstallStackTraceHandler()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11758
Test Plan: manual
Reviewed By: jowlyzhang
Differential Revision: D48668479
Pulled By: pdillinger
fbshipit-source-id: b6032fbe09444cdb8f1443a5e017d2eea4f6205a
Summary:
Same as title
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11729
Test Plan: make crash_test -j32
Reviewed By: anand1976
Differential Revision: D48534820
Pulled By: akankshamahajan15
fbshipit-source-id: 3a2a28af98dfad164b82ddaaf9fddb94c53a652e
Summary:
In blackbox tests, db_stress command always run with timeout. Timeout can happen during validation, leaving some of the keys not checked. Since key validation is done in order, it is quite likely that keys those are towards to the end of the set are never validated. This PR adds a final execution, without timeout, to ensure validation is executed for all keys, at least once.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11592
Reviewed By: cbi42
Differential Revision: D48003998
Pulled By: hx235
fbshipit-source-id: 72543475a932f12cf0f57534b7e3b6e07e87080f
Summary:
**Context/Summary:**
Same intention as https://github.com/facebook/rocksdb/pull/2693 - basically we now pick from the last sorted run and expand forward till we can't
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11740
Test Plan:
Existing UT
Stress test
Reviewed By: ajkr
Differential Revision: D48586475
Pulled By: hx235
fbshipit-source-id: 3eb3c3ee1d5f7e0b0d6d649baaeb8c6990fee398
Summary:
Add a bunch of C API functions to expose new `WaitForCompact` function and related options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11737
Test Plan: unit tests
Reviewed By: jaykorean
Differential Revision: D48568239
Pulled By: abulimov
fbshipit-source-id: 1ff35972d7abacd7e1e17fe2ada1e20cdc88d8de
Summary:
Currently the stress test does not support restoring expected state (to a specific sequence number) when there is unsynced data loss during the reopen phase. This causes a few internal stress test failure with errors like inconsistent value. This PR disables dropping unsynced data during reopen to avoid failures due to this issue. We can re-enable later after we decide to support unsynced data loss during DB reopen in stress test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11731
Test Plan:
* Running this test a few times can fail for inconsistent value before this change
```
./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --allow_concurrent_memtable_write=1 --allow_data_in_errors=True --async_io=0 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_protection_bytes_per_key=8 --block_size=16384 --bloom_bits=20.57166126835524 --bottommost_compression_type=disable --bytes_per_sync=262144 --cache_index_and_filter_blocks=1 --cache_size=8388608 --cache_type=auto_hyper_clock_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=0 --checksum_type=kxxHash --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=3 --compaction_style=1 --compaction_ttl=100 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --db_write_buffer_size=0 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --enable_thread_tracking=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --fifo_allow_compaction=1 --file_checksum_impl=big --flush_one_in=1000000 --format_version=3 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=6 --index_type=3 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=1000000 --log2_keys_per_lock=10 --long_running_snapshots=1 --manual_wal_flush_one_in=1000000 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=0 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=25000000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_max_range_deletions=100 --memtable_prefix_bloom_size_ratio=0 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=0 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=1 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=5 --open_write_fault_one_in=0 --ops_per_thread=200000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=1000000 --periodic_compaction_seconds=10 --prefix_size=-1 --prefixpercent=0 --prepopulate_block_cache=1 --preserve_internal_time_seconds=0 --progress_reports=0 --read_fault_one_in=1000 --readahead_size=524288 --readpercent=50 --recycle_log_file_num=0 --reopen=20 --ribbon_starting_level=0 --secondary_cache_fault_one_in=32 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=10 --subcompactions=3 --sync=0 --sync_fault_injection=1 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=2 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=1 --use_merge=0 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=1 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=zstd --write_buffer_size=33554432 --write_dbid_to_manifest=1 --writepercent=35```
Reviewed By: hx235
Differential Revision: D48537494
Pulled By: cbi42
fbshipit-source-id: ddae21b9bb6ee8d67229121f58513e95f7ef6d8d
Summary:
For some ldb commands that doesn't need to open the DB, it's still useful to use the DB's existing OPTIONS file if it's available.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11721
Reviewed By: pdillinger
Differential Revision: D48485540
Pulled By: jowlyzhang
fbshipit-source-id: 2d2db837523044066f1a2c4b59a5c03f6cd35e6b
Summary:
This piggy back the existing last level file temperature statistics test to test the default temperature becoming effective.
While adding this unit test, I found that the approach to swap out and use default temperature in `VersionBuilder::LoadTableHandlers` will miss the L0 files created from flush, and only work for existing SST files, SST files created by compaction. So this PR moves that logic to `TableCache::GetTableReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11722
Test Plan:
```
./db_test2 --gtest_filter="*LastLevelStatistics*"
make all check
```
Reviewed By: pdillinger
Differential Revision: D48489171
Pulled By: jowlyzhang
fbshipit-source-id: ac29f7d484916f3218729594c5bb35c4f2979ac2
Summary:
**Context/Summary:** as title, should be harmless. And it's a guessed fix to https://github.com/facebook/rocksdb/issues/11717 while no repro has obtained on my end yet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11720
Test Plan: existing tests
Reviewed By: cbi42
Differential Revision: D48475661
Pulled By: hx235
fbshipit-source-id: 7c7390319f094c540e703fe2e78a8d601b7a894b
Summary:
Implement trimming of readahead_size under a new option ReadOptions.auto_readahead_size. It'll trim the readahead_size during prefetching upto iterate_upper_bound offset only when ReadOptions.iterate_upper_bound is set, therefore reducing the prefetching of data beyond upper_bound.
It's enabled for both implicit auto readahead size and when ReadOptions.readahead_size is specified and for sync and async_io.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11684
Test Plan: Added new unit test
Reviewed By: anand1976
Differential Revision: D48479723
Pulled By: akankshamahajan15
fbshipit-source-id: 2b1703579caf779105e836b580866ffd7db076fc
Summary:
While it's rare, we may run into a scenario where `WaitForCompact()` waits for background jobs indefinitely. For example, not enough space error will add the job back to the queue while WaitForCompact() waits for _all jobs_ including the jobs that are in the queue to be completed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11711
Test Plan:
`DBCompactionWaitForCompactTest::WaitForCompactToTimeout` added
`timeout` option added to the variables for all of the existing DBCompactionWaitForCompactTests
Reviewed By: pdillinger, jowlyzhang
Differential Revision: D48416390
Pulled By: jaykorean
fbshipit-source-id: 7b6a12f705ab6c6dfaf8ad736a484ca654a86106
Summary:
This PR implements a new admission policy for the compressed secondary cache, which includes the functionality of the existing policy, and also admits items evicted from the primary block cache with the hit bit set. Effectively, the new policy works as follows -
1. When an item is demoted from the primary cache without a hit, a placeholder is inserted in the compressed cache. A second demotion will insert the full entry.
2. When an item is promoted from the compressed cache to the primary cache for the first time, a placeholder is inserted in the primary. The second promotion inserts the full entry, while erasing it form the compressed cache.
3. If an item is demoted from the primary cache with the hit bit set, it is immediately inserted in the compressed secondary cache.
The ```TieredVolatileCacheOptions``` has been updated with a new option, ```adm_policy```, which allows the policy to be selected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11713
Reviewed By: pdillinger
Differential Revision: D48444512
Pulled By: anand1976
fbshipit-source-id: b4cbf8c169a88097dff08e36e8bc4b3088de1492
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11714
Fixes T161017540.
The staging build starts failing with an undefined symbol error:
```
ld.lld: error: undefined symbol: std::enable_if<rocksdb::ParsedFullFilterBlock::kCacheEntryRole == (rocksdb::CacheEntryRole)13 || true, rocksdb::Status>::type rocksdb::BlockBasedTable::MaybeReadBlockAndLoadToCache<rocksdb::ParsedFullFilterBlock>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, bool, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::BlockContents*, bool) const
```
This is the `MaybeReadBlockAndLoadToCache` function where `TBlocklike = ParsedFullFilterBlock`. The trigger was an FDO profile update D48261413.
`MaybeReadBlockAndLoadToCache` is used in the same translation unit `block_based_table_reader.cc`, and also in another file `partitioned_filter_block.cc`. The later was the file that couldn't find the symbol. It seems after the FDO profile update, `MaybeReadBlockAndLoadToCache` may've got inlined into its caller in `block_based_table_reader.cc`. And with no knowledge of other usages, the symbol got stripped.
Explicitly instantiate the template similar to how `RetrieveBlock` was handled.
Reviewed By: pdillinger, akankshamahajan15
Differential Revision: D48400574
fbshipit-source-id: d4a80999bfb6ce4afa80678444139fcd8ae84aa4
Summary:
Add a column family option `default_temperature` that will be used for file reading accounting purpose, such as io statistics, for files that don't have an explicitly set temperature.
This options is not a mutable one, changing its value would require a DB restart. This is to avoid the confusion that had the option being a mutable one, the users may expect it to take effect on all files immediately, while in reality, it would only become effective for SST files opened in the future.
This `default_temperature` also just affect accounting during one DB session. It won't be recorded in manifest as the file's temperature and can be different across different DB sessions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11708
Test Plan:
```
make all check
```
Reviewed By: pdillinger
Differential Revision: D48375763
Pulled By: jowlyzhang
fbshipit-source-id: eb756696c14a694c6e2a93d2bb6f040563194981
Summary:
* JemallocNodumpAllocator was passing a size_t to FastRange32, which could cause compilation errors or warnings (seen with clang)
* Fixed the order of arguments to match what would be used with modulo operator (%), for clarity.
Fixes https://github.com/facebook/rocksdb/issues/11006
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11707
Test Plan: no functional change, existing tests
Reviewed By: ajkr
Differential Revision: D48435149
Pulled By: pdillinger
fbshipit-source-id: e6e8b107ded4eceda37db20df59985c846a2546b
Summary:
For leveled compaction, RocksDB has a special kind of compaction with reason "kBottommmostFiles" that compacts bottommost level files to clear data held by snapshots (more detail in https://github.com/facebook/rocksdb/issues/3009). Such compactions can happen soon after a relevant snapshot is released. For some use cases, a bottommost file may contain only a small amount of keys that can be cleared, so compacting such a file has a high write amp. In addition, these bottommost files may be compacted in compactions with reason other than "kBottommmostFiles" if we wait for some time (so that enough data is ingested to trigger such a compaction). This PR introduces an option `bottommost_file_compaction_delay` to specify the delay of these bottommost level single file compactions.
* The main change is in `VersionStorageInfo::ComputeBottommostFilesMarkedForCompaction()` where we only add a file to `bottommost_files_marked_for_compaction_` if it oldest_snapshot is larger than its non-zero largest_seqno **and** the file is old enough. Note that if a file is not old enough but its largest_seqno is less than oldest_snapshot, we exclude it from the calculation of `bottommost_files_mark_threshold_`. This makes the change simpler, but such a file's eligibility for compaction will only be checked the next time `ComputeBottommostFilesMarkedForCompaction()` is called. This happens when a new Version is created (compaction, flush, SetOptions()...), a new enough snapshot is released (`VersionStorageInfo::UpdateOldestSnapshot()`) or when a compaction is picked and compaction score has to be re-calculated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11701
Test Plan:
* Add two unit tests to test when bottommost_file_compaction_delay > 0.
* Ran crash test with the new option.
Reviewed By: jaykorean, ajkr
Differential Revision: D48331564
Pulled By: cbi42
fbshipit-source-id: c584f3dc5f6354fce3ed65f4c6366dc450b15ba8
Summary:
As titled. User-defined timestamp feature users sometimes directly call the user comparator to do validation on their side too. Having access to the root comparator can help make their code consistent for when UDT is enabled and disabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11704
Reviewed By: ltamasi
Differential Revision: D48355090
Pulled By: jowlyzhang
fbshipit-source-id: 26bc73543bfb379ef548d1361803d6f8c308cef6
Summary:
As titled, mostly adding documentation. While updating one usage of these util functions in the external file ingestion job based on code inspection.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11674
Test Plan:
```
make check
```
Note that no unit test was added or updated to check the change in the external file ingestion flow works. This is because user-defined timestamp doesn't support bulk loading yet. There could be other missing pieces that are needed to make this flow functional and testable. That work is separately tracked and unit tests will be added then.
Reviewed By: cbi42
Differential Revision: D48271338
Pulled By: jowlyzhang
fbshipit-source-id: c05c3440f1c08632dd0de51b563a30b44b4eb8b5
Summary:
It's a bit repetitive in order to give reasonably informative error messages.
I also removed total_order_seek in cases where it's not needed, just to make sure a case that shouldn't matter really doesn't.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11698
Test Plan:
run it -
```
$ DEBUG_LEVEL=0 TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox --max_key=100000 --duration=86400 --interval=10 --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --compression_type=none --blob_compression_type=none --writepercent=50 -iterpercent=45 -readpercent=0 -prefixpercent=0 --prefix_size=0 --verify_iterator_with_expected_state_one_in=10 --test_batches_snapshots=0 -enable_compaction_filter=0
```
Reviewed By: cbi42
Differential Revision: D48285036
Pulled By: ajkr
fbshipit-source-id: 51b147bd7c8011740629ae2fd8114d3d48ce7137
Summary:
* The plan is for AutoHyperClockCache to be selected when HyperClockCacheOptions::estimated_entry_charge == 0, and in that case to use a new configuration option min_avg_entry_charge for determining an extreme case maximum size for the hash table. For the placeholder, a hack is in place in HyperClockCacheOptions::MakeSharedCache() to make the unit tests happy despite the new options not really making sense with the current implementation.
* Mostly updating and refactoring tests to test both the current HCC (internal name FixedHyperClockCache) and a placeholder for the new version (internal name AutoHyperClockCache).
* Simplify some existing tests not to depend directly on cache type.
* Type-parameterize the shard-level unit tests, which unfortunately requires more syntax like `this->` in places for disambiguation.
* Added means of choosing auto_hyper_clock_cache to cache_bench, db_bench, and db_stress, including add to crash test.
* Add another templated class BaseHyperClockCache to reduce future copy-paste
* Added ReportProblems support to cache_bench
* Added a DEBUG-level diagnostic to ReportProblems for the variance in load factor throughout the table, which will become more of a concern with linear hashing to be used in the Auto implementation. Example with current Fixed HCC:
```
2023/08/10-13:41:41.602450 6ac36 [DEBUG] [che/clock_cache.cc:1507] Slot occupancy stats: Overall 49% (129008/262144), Min/Max/Window = 39%/60%/500, MaxRun{Pos/Neg} = 18/17
```
In other words, with overall occupancy of 49%, the lowest across any 500 contiguous cells is 39% and highest 60%. Longest run of occupied is 18 and longest run of unoccupied is 17. This seems consistent with random samples from a uniform distribution.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11692
Test Plan: Shouldn't be any meaningful changes yet to production code or to what is tested, but there is temporary redundancy in testing until the new implementation is plugged in.
Reviewed By: jowlyzhang
Differential Revision: D48247413
Pulled By: pdillinger
fbshipit-source-id: 11541f996d97af403c2e43c92fb67ff22dd0b5da
Summary:
**Context/Summary**
After https://github.com/facebook/rocksdb/pull/11058, we no longer lock the key range to iterate in TestIterateAgainstExpected, except for working with timestamp feature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11695
Test Plan: no code change
Reviewed By: ajkr
Differential Revision: D48276668
Pulled By: hx235
fbshipit-source-id: dc92a3708b2281dc737c0877fb755548bf03a9fc
Summary:
Context:
As mentioned in https://github.com/facebook/rocksdb/issues/11436, introducing `close_db` option in `WaitForCompactOptions` to close DB after waiting for compactions to finish. Must be set to true to close the DB upon compactions finishing.
1. `bool close_db = false` added to `WaitForCompactOptions`
2. Introduced `CancelPeriodicTaskSchedulers()` and moved unregistering PeriodicTaskSchedulers to it.`CancelAllBackgroundWork()` calls it now.
3. When close_db option is on, unpersisted data (data in memtable when WAL is disabled) will be flushed in `WaitForCompact()` if flush option is not on (and `mutable_db_options_.avoid_flush_during_shutdown` is not true). The unpersisted data flush in `CancelAllBackgroundWork()` will be skipped because `shutting_down_` flag will be set true before calling `Close()`.
4. Atomic boolean `reject_new_background_jobs_` is introduced to prevent new background jobs from being added during the short period of time after waiting is done and before `shutting_down_` is set by `Close()`.
5. `WaitForCompact()` now waits for recovery in progress to complete as well. (flush operations from WAL -> L0 files)
6. Added `close_db_` cases to all existing `WaitForCompactTests`
7. Added a scenario to `DBBasicTest::DBClose`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11497
Test Plan:
- Existing DBCompactionTests
- `WaitForCompactWithOptionToFlushAndCloseDB` added
- Added a scenario to `DBBasicTest::DBClose`
Reviewed By: pdillinger, jowlyzhang
Differential Revision: D46337560
Pulled By: jaykorean
fbshipit-source-id: 0f8c7ee09394847f2af5ea4bdd331b47bcdef0b0
Summary:
This API should consider the case when user-defined timestamp is enabled. Also added some documentation to some related API to clarify the usage in the case when user-defined timestamp is enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11689
Test Plan:
Unit test added
```
make check
./db_with_timestamp_basic_test --gtest_filter=*GetApproximateSizes*
```
Reviewed By: ltamasi
Differential Revision: D48208568
Pulled By: jowlyzhang
fbshipit-source-id: c5baa4a2923441f8ea3a3672c98223a43a3428dc
Summary:
fixes https://github.com/facebook/rocksdb/issues/11220
fixes https://github.com/facebook/rocksdb/issues/11594
CXX is not initialized early enough in Makefile.
On OpenBSD its value is `g++` at first, and this results in several `command not found`, notably during the tests for HAVE_POWER8 and HAS_ALTIVEC which results in the build problem mentionned in https://github.com/facebook/rocksdb/issues/11594
reordering the Makefile fixes the issue, by placing the creation of make_config.mk and its import before any use of `$(CXX)`
Also, fixes the platofrm version for macos. it must be 10.14 now that rocksdb is using the C++17 standard
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11675
Reviewed By: cbi42
Differential Revision: D48101615
Pulled By: ajkr
fbshipit-source-id: 1f1b4d4604480b31675140b92c6fe97dc55b8c75
Summary:
RocksDB provides APIs that enable creating SST files offline and then bulk loading them into the LSM tree quickly using metadata operations. Namely, clients can use the `SstFileWriter` class for the offline data preparation and then the IngestExternalFile family of APIs to perform the bulk loading. However, `SstFileWriter` currently does not support creating files with wide-column data in them. This PR adds `PutEntity` API implementation to `SstFileWriter` to support creating files with wide-column data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11688
Test Plan: - `BasicWideColumn` test added in external_sst_file_test
Reviewed By: ltamasi
Differential Revision: D48243779
Pulled By: jaykorean
fbshipit-source-id: 1697e5bd67121a648c03946f867416a94be0cadf
Summary:
Expose the functions that creates these UDT aware comparators so that users can create all the RocksDB builtin comparators in consistent ways.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11690
Reviewed By: ltamasi
Differential Revision: D48212021
Pulled By: jowlyzhang
fbshipit-source-id: a17a9a11e36e4267551e193f1b22647414acf467
Summary:
We're still getting some rare cases of 5x TryAgains in a row. Here I'm boosting the failure threshold to 10 in a row and adding more info in the output, to help us manually verify whether there's anything suspicous about the sequence of TryAgains, such as if Rollback failed to reset to new sequence numbers.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11691
Test Plan: By lowering the threshold to 2 and adjusting some other db_crashtest parameters, I was able to hit my new code and saw fresh sequence number on the subsequent TryAgain.
Reviewed By: cbi42
Differential Revision: D48236153
Pulled By: pdillinger
fbshipit-source-id: c0530e969ddcf8de7348e5cf7daf5d6d5dec24f4
Summary:
Set up the default column family timestamp size for a reused write committed transaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11685
Test Plan: Added unit test.
Reviewed By: ltamasi
Differential Revision: D48195129
Pulled By: jowlyzhang
fbshipit-source-id: 54faa900c123fc6daa412c01490e36c10a24a678
Summary:
**Context/Summary:**
- Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`.
- For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation)
- New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main.
- Misc
- More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority`
- Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444
Test Plan:
- CI fake db crash/stress test
- Microbenchmarking
**Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench`
- google benchmark version: https://github.com/google/benchmark/commit/604f6fd3f4b34a84ec4eb4db81d842fa4db829cd
- db_basic_bench_base: upstream
- db_basic_bench_pr: db_basic_bench_base + this PR
- asyncread_db_basic_bench_base: upstream + [db basic bench patch for IteratorNext](https://github.com/facebook/rocksdb/compare/main...hx235:rocksdb:micro_bench_async_read)
- asyncread_db_basic_bench_pr: asyncread_db_basic_bench_base + this PR
**Test**
Get
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_{null_stat|base|pr} --benchmark_filter=DBGet/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/negative_query:0/enable_filter:0/mmap:1/threads:1 --benchmark_repetitions=1000
```
Result
```
Coming soon
```
AsyncRead
```
TEST_TMPDIR=/dev/shm ./asyncread_db_basic_bench_{base|pr} --benchmark_filter=IteratorNext/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/async_io:1/include_detailed_timers:0 --benchmark_repetitions=1000 > syncread_db_basic_bench_{base|pr}.out
```
Result
```
Base:
1956,1956,1968,1977,1979,1986,1988,1988,1988,1990,1991,1991,1993,1993,1993,1993,1994,1996,1997,1997,1997,1998,1999,2001,2001,2002,2004,2007,2007,2008,
PR (2.3% regression, due to measuring `SST_READ_MICRO` that wasn't measured before):
1993,2014,2016,2022,2024,2027,2027,2028,2028,2030,2031,2031,2032,2032,2038,2039,2042,2044,2044,2047,2047,2047,2048,2049,2050,2052,2052,2052,2053,2053,
```
Reviewed By: ajkr
Differential Revision: D45918925
Pulled By: hx235
fbshipit-source-id: 58a54560d9ebeb3a59b6d807639692614dad058a
Summary:
As titled, and also removed an undefined and unused member function in for ColumnFamilyData
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11683
Reviewed By: ajkr
Differential Revision: D48156290
Pulled By: jowlyzhang
fbshipit-source-id: cc99aaafe69db6611af3854cb2b2ebc5044941f7
Summary:
Although the built-in Cache implementations never return failure on Insert without keeping a reference (Handle), a custom implementation could. The code for inserting into row_cache does not keep a reference but does not clean up appropriately on non-OK. This is a fix.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11682
Test Plan: unit test added that previously fails under ASAN
Reviewed By: ajkr
Differential Revision: D48153831
Pulled By: pdillinger
fbshipit-source-id: 86eb7387915c5b38b6ff5dd8deb4e1e223b7d020
Summary:
I'm anticipating using the public name HyperClockCache for both the current version with a fixed-size table and the upcoming version with an automatically growing table. However, for simplicity of testing them as substantially distinct implementations, I want to give them distinct internal names, like FixedHyperClockCache and AutoHyperClockCache.
This change anticipates that by renaming to FixedHyperClockCache and assuming for now that all the unit tests run on HCC will run and behave similarly for the automatic HCC. Obviously updates will need to be made, but I'm trying to avoid uninteresting find & replace updates in what will be a large and engineering-heavy PR for AutoHCC
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11676
Test Plan: no behavior change intended, except logging will now use the name FixedHyperClockCache
Reviewed By: ajkr
Differential Revision: D48103165
Pulled By: pdillinger
fbshipit-source-id: a33f1901488fea102164c2318e2f2b156aaba736
Summary:
Only re-calculate compaction score once for a batch of deletions. Fix performance regression brought by https://github.com/facebook/rocksdb/pull/8434.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10744
Test Plan:
In one of our production cluster that recently upgraded to RocksDB 6.29, it takes more than 10 minutes to delete files in 30,000 ranges. The RocksDB instance contains approximately 80,000 files. After this patch, the duration reduces to 100+ ms, which is on par with RocksDB 6.4.
Cherry-picking downstream PR: https://github.com/tikv/rocksdb/pull/316
Signed-off-by: tabokie <xy.tao@outlook.com>
Reviewed By: cbi42
Differential Revision: D48002581
Pulled By: ajkr
fbshipit-source-id: 7245607ee3ad79c53b648a6396c9159f166b9437
Summary:
More code leading up to dynamic HCC.
* Small enhancements to cache_bench
* Extra assertion in Unref
* Improve a CAS loop in ChargeUsageMaybeEvictStrict
* Put load factor constants in appropriate class
* Move `standalone` field to HyperClockTable::HandleImpl because it can be encoded differently in the upcoming dynamic HCC.
* Add a typed version of MemMapping to simplify some future code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11670
Test Plan: existing tests, unit test added for TypedMemMapping
Reviewed By: jowlyzhang
Differential Revision: D48056464
Pulled By: pdillinger
fbshipit-source-id: 186b7d3105c5d6d2eb6a592369bc10a97ee14a15
Summary:
An internal user reported this copy showing up in a CPU profile. We can use move instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11681
Differential Revision: D48103170
Pulled By: ajkr
fbshipit-source-id: 083d6470181a0041bb5275b657aa61bee23a3729
Summary:
When `num_levels` > 65, we may be shifting more than 63 bits in FileTtlBooster. This can give errors like: `runtime error: shift exponent 98 is too large for 64-bit type 'uint64_t' (aka 'unsigned long')`. This PR makes a quick fix for this issue by taking a min in the shifting component. This issue should be rare since it requires a user using a large `num_levels`. I'll follow up with a more complex fix if needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11673
Test Plan: * Add a unit test that produce the above error before this PR. Need to compile it with ubsan: `COMPILE_WITH_UBSAN=1 OPT="-fsanitize-blacklist=.circleci/ubsan_suppression_list.txt" ROCKSDB_DISABLE_ALIGNED_NEW=1 USE_CLANG=1 make V=1 -j32 compaction_picker_test`
Reviewed By: hx235
Differential Revision: D48074386
Pulled By: cbi42
fbshipit-source-id: 25e59df7e93f20e0793cffb941de70ac815d9392
Summary:
**Context/Summary:**
After https://github.com/facebook/rocksdb/pull/11631, file hint is not longer needed for compaction read. Therefore we can deprecate `Options::access_hint_on_compaction_start`. As this is a public API change, we should first mark the relevant APIs (including the Java's) deprecated and remove it in next major release 9.0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11658
Test Plan: No code change
Reviewed By: ajkr
Differential Revision: D47997856
Pulled By: hx235
fbshipit-source-id: 16e015ae7728c224b1caef73143aa9915668f4ac
Summary:
Add a mutable column family option `memtable_max_range_deletions`. When non-zero, RocksDB will try to flush the current memtable after it has at least `memtable_max_range_deletions` range deletions. Java API is added and crash test is updated accordingly to randomly enable this option.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11358
Test Plan:
* New unit test: `DBRangeDelTest.MemtableMaxRangeDeletions`
* Ran crash test `python3 ./tools/db_crashtest.py whitebox --simple --memtable_max_range_deletions=20` and saw logs showing flushed memtables usually with 20 range deletions.
Reviewed By: ajkr
Differential Revision: D46582680
Pulled By: cbi42
fbshipit-source-id: f23d6fa8d8264ecf0a18d55c113ba03f5e2504da
Summary:
... used in validating some HyperClockCache development in progress.
* Revamp the "populate cache" step to avoid redundant insertions (very rare in practice) and more consistently approach the desired resident_ratio while maintaining appropriate skew (still not perfect).
* Track and print hit ratio on lookups, to ensure a fair comparison is happening between implementations etc.
* Add an option to disable tracking and printing histograms (lots of output)
* Add an option to specify a random seed (for more reproducibility)
* Remove confusing/redundant "-skewed" option
Uses BitwiseAnd from https://github.com/facebook/rocksdb/issues/11660 (tested there)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11661
Test Plan: manual
Reviewed By: akankshamahajan15, jowlyzhang
Differential Revision: D47937671
Pulled By: pdillinger
fbshipit-source-id: 85a2bb881b1bca4f63e015bac684105fd91c9f35
Summary:
Updated the main branch for the 8.5.fb branch cut. Also made unreleased_history/release.sh backdate to the last commit instead of the current date in case the release manager is a laggard like myself.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11642
Reviewed By: cbi42
Differential Revision: D47783574
Pulled By: ajkr
fbshipit-source-id: 4e2a80f5ccd542dc7dd0d22dfd7e59cb136325a1
Summary:
BottomNBits() - there is a single fast instruction for this on x86 since BMI2, but testing with godbolt indicates you need at least GCC 10 for the compiler to choose that instruction from the obvious C++ code. https://godbolt.org/z/5a7Ysd41h
BitwiseAnd() - this is a convenience function that works around the language flaw that the type of the result of x & y is the larger of the two input types, when it should be the smaller. This can save some ugly static_cast.
I expect to use both of these in coming HyperClockCache developments, and have applied them in a couple of places in existing code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11660
Test Plan: unit tests added
Reviewed By: jowlyzhang
Differential Revision: D47935531
Pulled By: pdillinger
fbshipit-source-id: d148c43a1e51df4a1c549b93aaf2725a3f8d3bd6
Summary:
Adds a few missing features to the C API:
1) Statistics level
2) Getting individual values instead of a serialized string
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11263
Test Plan: unit tests
Reviewed By: ajkr
Differential Revision: D47309963
Pulled By: hx235
fbshipit-source-id: 84df59db4045fc0fb3ea4aec451bc5c2afd2a248
Summary:
(Copied from https://www.internalfb.com/diff/D46606060)
This diff makes its files safe for use with -Wimplicit-fallthrough. Now that we're using C+20 there's no reason not to use this C++17 feature to make our code safer.
It's currently possible to write code like this:
```
switch(x){
case 1:
foo1();
case 2:
foo2();
break;
case 3:
foo3();
}
```
But that's scary because we don't know whether the fallthrough from case 1 was intentional or not.
The -Wimplicit-fallthrough flag will make this an error. The solution is to either fix the bug by inserting break or indicating intention by using [[fallthrough]]; (from C++17).
```
switch(x){
case 1:
foo1();
[[fallthrough]]; // Solution if we intended to fallthrough
break; // Solution if we did not intend to fallthrough
case 2:
foo2();
break;
case 3:
foo3();
}
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11663
Test Plan: Existing tests
Reviewed By: jowlyzhang
Differential Revision: D47961248
Pulled By: jaykorean
fbshipit-source-id: 0d374c721bf1b328c14949dc5c17693da7311d03
Summary:
https://github.com/facebook/rocksdb/issues/11653 broke some crash tests.
Apparently these Rollbacks are needed for pessimistic transaction cases. (I'm still not sure if the API makes any sense with regard to safe usage. It's certainly not documented. Will consider in follow-up PRs.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11656
Test Plan: manual crash test runs, crash_test_with_multiops_wc_txn and crash_test_with_multiops_wp_txn
Reviewed By: cbi42
Differential Revision: D47906280
Pulled By: pdillinger
fbshipit-source-id: d058a01b6dbb47a4f08d199e335364168304f81b
Summary:
## Context checksum
All RocksDB checksums currently use 32 bits of checking
power, which should be 1 in 4 billion false negative (FN) probability (failing to
detect corruption). This is true for random corruptions, and in some cases
small corruptions are guaranteed to be detected. But some possible
corruptions, such as in storage metadata rather than storage payload data,
would have a much higher FN rate. For example:
* Data larger than one SST block is replaced by data from elsewhere in
the same or another SST file. Especially with block_align=true, the
probability of exact block size match is probably around 1 in 100, making
the FN probability around that same. Without `block_align=true` the
probability of same block start location is probably around 1 in 10,000,
for FN probability around 1 in a million.
To solve this problem in new format_version=6, we add "context awareness"
to block checksum checks. The stored and expected checksum value is
modified based on the block's position in the file and which file it is in. The
modifications are cleverly chosen so that, for example
* blocks within about 4GB of each other are guaranteed to use different context
* blocks that are offset by exactly some multiple of 4GiB are guaranteed to use
different context
* files generated by the same process are guaranteed to use different context
for the same offsets, until wrap-around after 2^32 - 1 files
Thus, with format_version=6, if a valid SST block and checksum is misplaced,
its checksum FN probability should be essentially ideal, 1 in 4B.
## Footer checksum
This change also adds checksum protection to the SST footer (with
format_version=6), for the first time without relying on whole file checksum.
To prevent a corruption of the format_version in the footer (e.g. 6 -> 5) to
defeat the footer checksum, we change much of the footer data format
including an "extended magic number" in format_version 6 that would be
interpreted as empty index and metaindex block handles in older footer
versions. We also change the encoding of handles to free up space for
other new data in footer.
## More detail: making space in footer
In order to keep footer the same size in format_version=6 (avoid change to IO
patterns), we have to free up some space for new data. We do this two ways:
* Metaindex block handle is encoded down to 4 bytes (from 10) by assuming
it immediately precedes the footer, and by assuming it is < 4GB.
* Index block handle is moved into metaindex. (I don't know why it was
in footer to begin with.)
## Performance
In case of small performance penalty, I've made a "pay as you go" optimization
to compensate: replace `MutableCFOptions` in BlockBasedTableBuilder::Rep
with the only field used in that structure after construction: `prefix_extractor`.
This makes the PR an overall performance improvement (results below).
Nevertheless I'm seeing essentially no difference going from fv=5 to fv=6,
even including that improvement for both. That's based on extreme case table
write performance testing, many files with many blocks. This is relatively
checksum intensive (small blocks) and salt generation intensive (small files).
```
(for I in `seq 1 100`; do TEST_TMPDIR=/dev/shm/dbbench2 ./db_bench -benchmarks=fillseq -memtablerep=vector -disable_wal=1 -allow_concurrent_memtable_write=false -num=3000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -write_buffer_size=100000 -compression_type=none -block_size=1000; done) 2>&1 | grep micros/op | tee out
awk '{ tot += $5; n += 1; } END { print int(1.0 * tot / n) }' < out
```
Each value below is ops/s averaged over 100 runs, run simultaneously with competing
configuration for load fairness
Before -> after (both fv=5): 483530 -> 483673 (negligible)
Re-run 1: 480733 -> 485427 (1.0% faster)
Re-run 2: 483821 -> 484541 (0.1% faster)
Before (fv=5) -> after (fv=6): 482006 -> 485100 (0.6% faster)
Re-run 1: 482212 -> 485075 (0.6% faster)
Re-run 2: 483590 -> 484073 (0.1% faster)
After fv=5 -> after fv=6: 483878 -> 485542 (0.3% faster)
Re-run 1: 485331 -> 483385 (0.4% slower)
Re-run 2: 485283 -> 483435 (0.4% slower)
Re-run 3: 483647 -> 486109 (0.5% faster)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9058
Test Plan:
unit tests included (table_test, db_properties_test, salt in env_test). General DB tests
and crash test updated to test new format_version.
Also temporarily updated the default format version to 6 and saw some test failures. Almost all
were due to an inadvertent additional read in VerifyChecksum to verify the index block checksum,
though it's arguably a bug that VerifyChecksum does not appear to (re-)verify the index block
checksum, just assuming it was verified in opening the index reader (probably *usually* true but
probably not always true). Some other concerns about VerifyChecksum are left in FIXME
comments. The only remaining test failure on change of default (in block_fetcher_test) now
has a comment about how to upgrade the test.
The format compatibility test does not need updating because we have not updated the default
format_version.
Reviewed By: ajkr, mrambacher
Differential Revision: D33100915
Pulled By: pdillinger
fbshipit-source-id: 8679e3e572fa580181a737fd6d113ed53c5422ee
Summary:
In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers.
Also, some of the APIs were not clear about Transaction semantics, so I have clarified:
* (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction).
* Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test.
Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress.
* Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function.
* Use unique_ptr (nicely complements removing unnecessary Rollbacks)
* Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".)
Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653
Test Plan:
this is the test :)
Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances.
Reviewed By: cbi42
Differential Revision: D47882995
Pulled By: pdillinger
fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
Summary:
Some trailing whitespace has leaked into HISTORY.md entries. This can lead to unexpected changes when modifying HISTORY.md with hygienic editors (e.g. for a patch release). This change should protect against future cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11652
Test Plan: manual
Reviewed By: akankshamahajan15
Differential Revision: D47882814
Pulled By: pdillinger
fbshipit-source-id: 148c3746d3b298cb6e1f655f0416d46619969086
Summary:
... to improve data integrity validation during compaction.
A new option `compaction_verify_record_count` is introduced for this verification and is enabled by default. One exception when the verification is not done is when a compaction filter returns kRemoveAndSkipUntil which can cause CompactionIterator to seek until some key and hence not able to keep track of the number of keys processed.
For expected number of input keys, we sum over the number of total keys - number of range tombstones across compaction input files (`CompactionJob::UpdateCompactionStats()`). Table properties are consulted if `FileMetaData` is not initialized for some input file. Since table properties for all input files were also constructed during `DBImpl::NotifyOnCompactionBegin()`, `Compaction::GetTableProperties()` is introduced to reduce duplicated code.
For actual number of keys processed, each subcompaction will record its number of keys processed to `sub_compact->compaction_job_stats.num_input_records` and aggregated when all subcompactions finish (`CompactionJob::AggregateCompactionStats()`). In the case when some subcompaction encountered kRemoveAndSkipUntil from compaction filter and does not have accurate count, it propagates this information through `sub_compact->compaction_job_stats.has_num_input_records`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11571
Test Plan:
* Add a new unit test `DBCompactionTest.VerifyRecordCount` for the corruption case.
* All other unit tests for non-corrupted case.
* Ran crash test for a few hours: `python3 ./tools/db_crashtest.py whitebox --simple`
Reviewed By: ajkr
Differential Revision: D47131965
Pulled By: cbi42
fbshipit-source-id: cc8e94565dd526c4347e9d3843ecf32f6727af92
Summary:
Add a built-in comparator that supports uint64_t style user-defined timestamps for ReverseBytewiseComparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11647
Test Plan:
Added a test wrapper for retrieving this comparator from registry and used it in this test:
`./udt_util_test`
Reviewed By: ltamasi
Differential Revision: D47848303
Pulled By: jowlyzhang
fbshipit-source-id: 5af5534a8c2d9195997d0308c8e194c1c797548c
Summary:
Fix use_after_free bug in async_io MultiReads when underlying FS enabled kFSBuffer. kFSBuffer is when underlying FS pass their own buffer instead of using RocksDB scratch in FSReadRequest
Since it's an experimental feature, added a hack for now to fix the bug.
Planning to make public API change to remove const from the callback as it doesn't make sense to use const.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11645
Test Plan: tested locally
Reviewed By: ltamasi
Differential Revision: D47819907
Pulled By: akankshamahajan15
fbshipit-source-id: 1faf5ef795bf27e2b3a60960374d91274931df8d
Summary:
Add support to allow enabling / disabling user-defined timestamps feature for an existing column family in combination with the in-Memtable only feature.
To do this, this PR includes:
1) Log the `persist_user_defined_timestamps` option per column family in Manifest to facilitate detecting an attempt to enable / disable UDT. This entry is enforced to be logged in the same VersionEdit as the user comparator name entry.
2) User-defined timestamps related options are validated when re-opening a column family, including user comparator name and the `persist_user_defined_timestamps` flag. These type of settings and settings change are considered valid:
a) no user comparator change and no effective `persist_user_defined_timestamp` flag change.
b) switch user comparator to enable UDT provided the immediately effective `persist_user_defined_timestamps` flag
is false.
c) switch user comparator to disable UDT provided that the before-change `persist_user_defined_timestamps` is
already false.
3) when an attempt to enable UDT is detected, we mark all its existing SST files as "having no UDT" by marking its `FileMetaData.user_defined_timestamps_persisted` flag to false and handle their file boundaries `FileMetaData.smallest`, `FileMetaData.largest` by padding a min timestamp.
4) while enabling / disabling UDT feature, timestamp size inconsistency in existing WAL logs are handled to make it compatible with the running user comparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11623
Test Plan:
```
make all check
./db_with_timestamp_basic_test --gtest-filter="*EnableDisableUDT*"
./db_wal_test --gtest_filter="*EnableDisableUDT*"
```
Reviewed By: ltamasi
Differential Revision: D47636862
Pulled By: jowlyzhang
fbshipit-source-id: dcd19f67292da3c3cc9584c09ad00331c9ab9322
Summary:
Make flush respect the cutoff timestamp `full_history_ts_low` as much as possible for the user-defined timestamps in Memtables only feature. We achieve this by not proceeding with the actual flushing but instead reschedule the same `FlushRequest` so a follow up flush job can continue with the check after some interval.
This approach doesn't work well for atomic flush, so this feature currently is not supported in combination with atomic flush. Furthermore, this approach also requires a customized method to get the next immediately bigger user-defined timestamp. So currently it's limited to comparator that use uint64_t as the user-defined timestamp format. This support can be extended when we add such a customized method to `AdvancedColumnFamilyOptions`.
For non atomic flush request, at any single time, a column family can only have as many as one FlushRequest for it in the `flush_queue_`. There is deduplication done at `FlushRequest` enqueueing(`SchedulePendingFlush`) and dequeueing time (`PopFirstFromFlushQueue`). We hold the db mutex between when a `FlushRequest` is popped from the queue and the same FlushRequest get rescheduled, so no other `FlushRequest` with a higher `max_memtable_id` can be added to the `flush_queue_` blocking us from re-enqueueing the same `FlushRequest`.
Flush is continued nevertheless if there is risk of entering write stall mode had the flush being postponed, e.g. due to accumulation of write buffers, exceeding the `max_write_buffer_number` setting. When this happens, the newest user-defined timestamp in the involved Memtables need to be tracked and we use it to increase the `full_history_ts_low`, which is an inclusive cutoff timestamp for which RocksDB promises to keep all user-defined timestamps equal to and newer than it.
Tet plan:
```
./column_family_test --gtest_filter="*RetainUDT*"
./memtable_list_test --gtest_filter="*WithTimestamp*"
./flush_job_test --gtest_filter="*WithTimestamp*"
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11599
Reviewed By: ajkr
Differential Revision: D47561586
Pulled By: jowlyzhang
fbshipit-source-id: 9400445f983dd6eac489e9dd0fb5d9b99637fe89
Summary:
this is stacked on https://github.com/facebook/rocksdb/issues/11550 to further clarify usage of these two options for universal compaction. Similar to FIFO, the two options have the same meaning for universal compaction, which can be confusing to use. For example, for universal compaction, dynamically changing the value of `ttl` has no impact on periodic compactions. Users should dynamically change `periodic_compaction_seconds` instead. From feature matrix (https://fburl.com/daiquery/5s647hwh), there are instances where users set `ttl` to non-zero value and `periodic_compaction_seconds` to 0. For backward compatibility reason, instead of deprecating `ttl`, comments are added to mention that `periodic_compaction_seconds` are preferred. In `SanitizeOptions()`, we update the value of `periodic_compaction_seconds` to take into account value of `ttl`. The logic is documented in relevant option comment.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11552
Test Plan: * updated existing unit test `DBTestUniversalCompaction2.PeriodicCompactionDefault`
Reviewed By: ajkr
Differential Revision: D47381434
Pulled By: cbi42
fbshipit-source-id: bc41f29f77318bae9a96be84dd89bf5617c7fd57
Summary:
Remove obsolete comment.
Support for WriteBatchWithIndex::NewIteratorWithBase when overwrite_key=false is added in https://github.com/facebook/rocksdb/pull/8135, as you can clearly see in the HISTORY.md.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11636
Reviewed By: jowlyzhang
Differential Revision: D47722955
Pulled By: ajkr
fbshipit-source-id: 4fa44a309d9708e9f4a1530918a9aaf7114c9032
Summary:
... ahead of dynamic variant.
* Introduce an Unref function for a common pattern. Cases that were previously using std::memory_order_acq_rel we doing so because we were saving the pre-updated value in case it might be used. Now we are explicitly throwing away the pre-updated value so do not need the acquire semantic, just release.
* Introduce a reusable EvictionData struct and TrackAndReleaseEvictedEntry() function.
* Based on a linter suggesting, use const Func& parameter type instead of Func for templated callable parameters.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11630
Test Plan: existing tests, and performance test with release build of cache_bench. Getting 1-2% difference between before & after from run to run, but inconsistent about which one is faster.
Reviewed By: jowlyzhang
Differential Revision: D47657334
Pulled By: pdillinger
fbshipit-source-id: 5cf2377c0d47a39143b04be6735f98c550e8bdc3
Summary:
**Context/Summary**
As titled. The benefit of doing so is to explicitly call readahead() instead of relying page cache behavior for compaction read when we know that we most likely need readahead as compaction read is sequential read .
**Test**
Extended the existing UT to cover compaction read case
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11631
Reviewed By: ajkr
Differential Revision: D47681437
Pulled By: hx235
fbshipit-source-id: 78792f64985c4dc44aa8f2a9c41ab3e8bbc0bc90
Summary:
Add path existence check in the script to avoid script running even when db_bench executable does not exist or relative path is not right.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11621
Reviewed By: jowlyzhang
Differential Revision: D47552590
Pulled By: ajkr
fbshipit-source-id: f09ea069f69e067212b249a22ad755b76bc6063a
Summary:
In [db_impl_open.cc](https://github.com/facebook/rocksdb/blob/main/db/db_impl/db_impl_open.cc), the sync point `SanitizeOptions::AfterChangeMaxOpenFiles` is used to set `max_open_files` with some specified "**invalid**" value even if it has been sanitized.
However, in [db_compaction_test.cc](https://github.com/facebook/rocksdb/blob/main/db/db_compaction_test.cc), `SanitizeOptions::AfterChangeMaxOpenFiles` would not be executed since `SyncPoint::EnableProcessing()` is run after `DBTestBase::Reopen()`. To enable `SanitizeOptions::AfterChangeMaxOpenFiles`, `SyncPoint::EnableProcessing()` should be put ahead of `DBTestBase::Reopen()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11583
Test Plan:
run unit tests locally as below:
```
make J=1 check
[ RUN ] DBCompactionTest.LevelTtlCascadingCompactions
[ OK ] DBCompactionTest.LevelTtlCascadingCompactions (85 ms)
[ RUN ] DBCompactionTest.LevelPeriodicCompaction
[ OK ] DBCompactionTest.LevelPeriodicCompaction (57 ms)
```
Reviewed By: jowlyzhang
Differential Revision: D47311827
Pulled By: ajkr
fbshipit-source-id: 99165e87a8129e404af06fdf9b4c96eca540fd23
Summary:
This adds proper support for using rocksdb with FetchContent, without this PR the user must include the following with their own `CMakeLists.txt` file:
```cmake
include_directories(./build/_deps/rocksdb-src/include)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11575
Reviewed By: jowlyzhang
Differential Revision: D47163520
Pulled By: ajkr
fbshipit-source-id: a202dcf435ecc9dd8d51c88f90e98c04814721ca
Summary:
An internal user wants to implement a key-aware row cache policy. For that, they need to know the components of the cache key, especially the user key component. With a specialized `RowCache` interface, we will be able to tell them the components so they won't have to make assumptions about our internal key schema.
This PR prepares for the specialized `RowCache` interface by updating the migration plan of https://github.com/facebook/rocksdb/issues/11450. I added a release note for the removed APIs and didn't mention the added ones for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11620
Reviewed By: pdillinger
Differential Revision: D47536962
Pulled By: ajkr
fbshipit-source-id: bbee0fc4ad67fc699a66b8f2b4ea4544dd003691
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11624
<queue> must be included to use std::queue.
Reviewed By: pdillinger
Differential Revision: D47562433
fbshipit-source-id: 7c5b19fd9e411694c782dfc0dff0231d4f92ef24
Summary:
... ahead of planned dynamic HCC variant. This changes
simplifies some logic while still enabling future code sharing between
implementation variants.
Detail: For complicated reasons, using a std::function parameter to
`ConstApplyToEntriesRange` with a lambda argument does not play
nice with templated HandleImpl. An explicit conversion to std::function
would be needed for it to compile. Templating the function type is the
easy work-around.
Also made some functions from https://github.com/facebook/rocksdb/issues/11572 private as recommended
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11609
Test Plan: existing tests
Reviewed By: jowlyzhang
Differential Revision: D47407415
Pulled By: pdillinger
fbshipit-source-id: 0f65954db16335999b78fb7d2563ec627624cef0
Summary:
Stacked on https://github.com/facebook/rocksdb/issues/11572
* Minimize use of std::function and lambdas to minimize chances of
compiler heap-allocating closures (unnecessary stress on allocator). It
appears that converting FindSlot to a template enables inlining the
lambda parameters, avoiding heap allocations.
* Clean up some logic with FindSlot (FIXMEs from https://github.com/facebook/rocksdb/issues/11572)
* Fix handling of rare case of probing all slots, with new unit test.
(Previously Insert would not roll back displacements in that case, which
would kill performance if it were to happen.)
* Add an -early_exit option to cache_bench for gathering memory stats
before deallocation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11601
Test Plan:
unit test added for probing all slots
## Seeing heap allocations
Run `MALLOC_CONF="stats_print:true" ./cache_bench -cache_type=hyper_clock_cache`
before https://github.com/facebook/rocksdb/issues/11572 vs. after this change. Before, we see this in the
interesting bin statistics:
```
size nrequests
---- ---------
32 578460
64 24340
8192 578460
```
And after:
```
size nrequests
---- ---------
32 (insignificant)
64 24370
8192 579130
```
## Performance test
Build with `make USE_CLANG=1 PORTABLE=0 DEBUG_LEVEL=0 -j32 cache_bench`
Run `./cache_bench -cache_type=hyper_clock_cache -ops_per_thread=5000000`
in before and after configurations, simultaneously:
```
Before: Complete in 33.244 s; Rough parallel ops/sec = 2406442
After: Complete in 32.773 s; Rough parallel ops/sec = 2441019
```
Reviewed By: jowlyzhang
Differential Revision: D47375092
Pulled By: pdillinger
fbshipit-source-id: 46f0f57257ddb374290a0a38c651764ea60ba410
Summary:
We observed `CompactionOutputs::UpdateGrandparentBoundaryInfo` consumes much time for `InternalKey::DecodeFrom` and `InternalKey::~InternalKey` in flame graph.
This PR omit the InternalKey object in `CompactionOutputs::UpdateGrandparentBoundaryInfo` .
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11610
Reviewed By: ajkr
Differential Revision: D47426971
Pulled By: cbi42
fbshipit-source-id: f0d3a8186d778294515c0685032f5b395c4d6a62
Summary:
Separate out some functionality that will be common to both static and dynamic HCC into BaseClockTable. Table::InsertState and GrowIfNeeded will be used by the dynamic HCC so don't make much sense right now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11572
Test Plan:
existing tests. No functional changes intended.
Performance test in subsequent PR https://github.com/facebook/rocksdb/issues/11601
Reviewed By: jowlyzhang
Differential Revision: D47110496
Pulled By: pdillinger
fbshipit-source-id: 379bd433322a42ea28c0043b41ec24956d21e7aa
Summary:
I got the following error message when an SST file is recorded in MANIFEST but is missing from the db folder.
It's confusing in two ways:
1. The part about file "./074837.ldb" which RocksDB will attempt to open only after ./074837.sst is not found.
2. The last part about "No such file or directory in file ./MANIFEST-074507" sounds like `074837.ldb` is not found in manifest.
```
ldb --hex --db=. get some_key
Failed: Corruption: Corruption: IO error: No such file or directory: While open a file for random read: ./074837.ldb: No such file or directory in file ./MANIFEST-074507
```
Improving the error message a little bit:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11573
Test Plan:
run the same command after this PR
```
Failed: Corruption: Corruption: IO error: No such file or directory: While open a file for random read: ./074837.sst: No such file or directory The file ./MANIFEST-074507 may be corrupted.
```
Reviewed By: ajkr
Differential Revision: D47192056
Pulled By: cbi42
fbshipit-source-id: 06863f376cc4455803cffb2250c41399b4c39467
Summary:
Handle file boundaries `FileMetaData.smallest`, `FileMetaData.largest` for when `persist_user_defined_timestamps` is false:
1) on the manifest write path, the original user-defined timestamps in file boundaries are stripped. This stripping is done during `VersionEdit::Encode` to limit the effect of the stripping to only the persisted version of the file boundaries.
2) on the manifest read path during DB open, a a min timestamp is padded to the file boundaries. Ideally, this padding should happen during `VersionEdit::Decode` so that all in memory file boundaries have a compatible user key format as the running user comparator. However, because the user-defined timestamp size information is not available at that time. This change is added to `VersionEditHandler::OnNonCfOperation`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11578
Test Plan:
```
make all check
./version_edit_test --gtest_filter="*EncodeDecodeNewFile4HandleFileBoundary*".
./db_with_timestamp_basic_test --gtest_filter="*HandleFileBoundariesTest*"
```
Reviewed By: pdillinger
Differential Revision: D47309399
Pulled By: jowlyzhang
fbshipit-source-id: 21b4d54d2089a62826b31d779094a39cb2bbbd51
Summary:
Thanks pdillinger for pointing out this test hole. The test `DBWALTestWithTimestamp.Recover` that is intended to test recovery from WAL including user-defined timestamps doesn't achieve its promised coverage. Specifically, after https://github.com/facebook/rocksdb/issues/11557, timestamps will be removed during flush, and RocksDB by default flush memtables during recovery with `avoid_flush_during_recovery` defaults to false. This test didn't fail even if all the timestamps are quickly lost due to the default flush behavior.
This PR renamed test `Recover` to `RecoverAndNoFlush`, and updated it to verify timestamps are successfully recovered from WAL with some time-travel reads. `avoid_flush_during_recovery` is set to true to help do this verification.
On the other hand, for test `DBWALTestWithTimestamp.RecoverAndFlush`, since flush on reopen is DB's default behavior. Setting the flags `max_write_buffer` and `arena_block_size` are not really the factors that enforces the flush, so these flags are removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11577
Test Plan: ./db_wal_test
Reviewed By: pdillinger
Differential Revision: D47142892
Pulled By: jowlyzhang
fbshipit-source-id: 9465e278806faa5885b541b4e32d99e698edef7d
Summary:
https://github.com/facebook/rocksdb/issues/11542 added a parameter to the C API `rocksdb_options_add_compact_on_deletion_collector_factory` which causes some internal builds to fail. External users using this API would also require code change. Making the API backward compatible by restoring the old C API and add the parameter to a new C API `rocksdb_options_add_compact_on_deletion_collector_factory_del_ratio`.
Also updated change log for 8.4 and will backport this change to 8.4 branch once landed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11593
Test Plan: `make c_test && ./c_test`
Reviewed By: akankshamahajan15
Differential Revision: D47299555
Pulled By: cbi42
fbshipit-source-id: 517dc093ef4cf02cac2fe4af4f1af13754bbda63
Summary:
both options `ttl` and `periodic_compaction_seconds` have the same meaning for FIFO compaction, which is redundant and can be confusing to use. For example, setting TTL to 0 does not disable TTL: user needs to also set periodic_compaction_seconds to 0. Another example is that dynamically setting `periodic_compaction_seconds` (surprisingly) has no effect on TTL compaction. This is because FIFO compaction picker internally only looks at value of `ttl`. The value of `ttl` is in `SanitizeOptions()` which take into account the value of `periodic_compaction_seconds`, but dynamically setting an option does not invoke this method.
This PR clarifies the usage of both options for FIFO compaction: only `ttl` should be used, `periodic_compaction_seconds` will not have any effect on FIFO compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11550
Test Plan:
- updated existing unit test `DBOptionsTest.SanitizeFIFOPeriodicCompaction`
- checked existing values of both options in feature matrix: https://fburl.com/daiquery/xxd0gs9w. All current uses cases either have `periodic_compaction_seconds = 0` or have `periodic_compaction_seconds > ttl`, so should not cause change of behavior.
Reviewed By: ajkr
Differential Revision: D46902959
Pulled By: cbi42
fbshipit-source-id: a9ede235b276783b4906aaec443551fa62ceff4c
Summary:
`sst_dump --command=verify` did not set read_options.verify_checksum to true so it was not verifying checksum.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11576
Test Plan:
ran the same command on an SST file with bad checksum:
```
sst_dump --command=verify --file=...sst_file_with_bad_block_checksum
Before this PR:
options.env is 0x6ba048
Process ...sst_file_with_bad_block_checksum
Sst file format: block-based
The file is ok
After this PR:
options.env is 0x7f43f6690000
Process ...sst_file_with_bad_block_checksum
Sst file format: block-based
... is corrupted: Corruption: block checksum mismatch: stored = 2170109798, computed = 2170097510, type = 4 ...
```
Reviewed By: ajkr
Differential Revision: D47136284
Pulled By: cbi42
fbshipit-source-id: 07d68db715c00347145e5b83d649aef2c3f2acd9
Summary:
This should be a benign bug caused by a long lived typo, this PR fix this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11398
Reviewed By: ajkr
Differential Revision: D47163379
Pulled By: cbi42
fbshipit-source-id: 531728cae496fd7ac1371bbbd64fc103c3a90dcf
Summary:
Logically strip the user-defined timestamp when L0 files are created during flush when `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` is false. Logically stripping timestamp here means replacing the original user-defined timestamp with a mininum timestamp, which for now is hard coded to be all zeros bytes.
While working on this, I caught a missing piece on the `BlockBuilder` level for this feature. The current quick path `std::min(buffer_size, last_key_size)` needs a bit tweaking to work for this feature. When user-defined timestamp is stripped during block building, on writing first entry or right after resetting, `buffer` is empty and `buffer_size` is zero as usual. However, in follow-up writes, depending on the size of the stripped user-defined timestamp, and the size of the value, what's in `buffer` can sometimes be smaller than `last_key_size`, leading `std::min(buffer_size, last_key_size)` to truncate the `last_key`. Previous test doesn't caught the bug because in those tests, the size of the stripped user-defined timestamps bytes is smaller than the length of the value. In order to avoid the conditional operation, this PR changed the original trivial `std::min` operation into an arithmetic operation. Since this is a change in a hot and performance critical path, I did the following benchmark to check no observable regression is introduced.
```TEST_TMPDIR=/dev/shm/rocksdb1 ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=50000000```
Compiled with DEBUG_LEVEL=0
Test vs. control runs simulaneous for better accuracy, units = ops/sec
PR vs base:
Round 1: 350652 vs 349055
Round 2: 365733 vs 364308
Round 3: 355681 vs 354475
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11557
Test Plan:
New timestamp specific test added or existing tests augmented, both are parameterized with `UserDefinedTimestampTestMode`:
`UserDefinedTimestampTestMode::kNormal` -> UDT feature enabled, write / read with min timestamp
`UserDefinedTimestampTestMode::kStripUserDefinedTimestamps` -> UDT feature enabled, write / read with min timestamp, set Options.persist_user_defined_timestamps to false.
```
make all check
./db_wal_test --gtest_filter="*WithTimestamp*"
./flush_job_test --gtest_filter="*WithTimestamp*"
./repair_test --gtest_filter="*WithTimestamp*"
./block_based_table_reader_test
```
Reviewed By: pdillinger
Differential Revision: D47027664
Pulled By: jowlyzhang
fbshipit-source-id: e729193b6334dfc63aaa736d684d907a022571f5
Summary:
Expose the remaining fields of PlainTableOptions as arguments to `rocksdb_options_set_plain_table_factory` in the C API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11442
Reviewed By: ajkr
Differential Revision: D46786962
Pulled By: hx235
fbshipit-source-id: 8862083dde332bfecc5ff02f9375776ad35c11f5
Summary:
Add `skip_tmpdir_check` argument in crash script. If `tmp_dir` is on remote storage and exist, `isdir` will be false (checking on local storage) leading to exit. By passing `skip_tmpdir_check` with `crashtest.py`, the dir check can be skipped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11539
Test Plan: Ran locally
Reviewed By: anand1976
Differential Revision: D46740456
Pulled By: akankshamahajan15
fbshipit-source-id: 8726882ef53d2c84b604c7515e84eda6d1bf797c
Summary:
I made some changes to add OpenBSD support.
Second time doing something like this, so I apologize in advance if I'm doing something wrong (had some minor hiccups with how github worked).
Fixes https://github.com/facebook/rocksdb/issues/11220
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11255
Reviewed By: akankshamahajan15
Differential Revision: D46361706
Pulled By: ajkr
fbshipit-source-id: 90922fa30197fe6d6f3c0e3ecca2dbb92c337277
Summary:
There are some comments on subclasses in EncryptedEnv module which are duplicate to their parent classes, it would be nice to remove the duplication and keep the consistency if the comments on parent classes updated in someday.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11549
Reviewed By: akankshamahajan15
Differential Revision: D47007061
Pulled By: ajkr
fbshipit-source-id: 8bfdaf9f2418a24ca951c30bb88e90ac861d9016
Summary:
Infer detected a(n) [Unnecessary Copy Intermediate](https://fbinfer.com/docs/next/all-issue-types#unnecessary copy intermediate) issue. variable &my_secondary_handles is copied unnecessarily into an intermediate on line 268. To avoid the copy, try moving it by calling std::move instead or alternatively change the callee's parameter type to const &.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11566
Reviewed By: akankshamahajan15
Differential Revision: D47057361
Pulled By: ajkr
fbshipit-source-id: bc5d7a71638aecbf976f1a163128b489c9e87fd8
Summary:
When num_file_reads_for_auto_readahead = 1, during seek, it would go for prefetchingextra data in second buffer along with seek data, that would lead to increase in read data and
discarded bytes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11560
Test Plan: Added unit test
Reviewed By: anand1976
Differential Revision: D47008102
Pulled By: akankshamahajan15
fbshipit-source-id: 566c6131cb5f968d5efb81fd0ab233ff7e534ab0
Summary:
https://github.com/facebook/rocksdb/issues/11378 added a new overloaded `CreateColumnFamilyWithImport` API and updated the virtual function in `StackableDB` and `DBImplReadOnly` to the newly overloaded one. This caused internal error when there is a derived class that tries to override the original `CreateColumnFamilyWithImport` function. This PR adds the original `CreateColumnFamilyWithImport` function back to `StackableDB` and `DBImplReadOnly`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11556
Test Plan: check if this fixes an internal build
Reviewed By: akankshamahajan15
Differential Revision: D46980506
Pulled By: cbi42
fbshipit-source-id: 975a6c5748bf9481499a62ee5997ca59e542e3bc
Summary:
1. Public API change: Replace `use_async_io` API in file_system with `SupportedOps` API which is used by underlying FileSystem to indicate to upper layers whether the FileSystem supports different operations introduced in `enum FSSupportedOps `. Right now operations are `async_io` and whether FS will provide its own buffer during reads or not. The api is changed to extend it to various FileSystem operations in one API rather than creating a separate API for each operation.
2. Provide support for underlying FS to pass their own buffer during Reads (async and sync read) instead of using RocksDB provided `scratch` (buffer) in `FSReadRequest`. Currently only MultiRead supports it and later will be extended to other reads as well (point lookup, scan etc). More details in how to enable in file_system.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11324
Test Plan: Tested locally
Reviewed By: anand1976
Differential Revision: D44465322
Pulled By: akankshamahajan15
fbshipit-source-id: 9ec9e08f839b5cc815e75d5dade6cd549998d0ec
Summary:
... instead of race-condition-laden FaultInjectionTestEnv. See https://app.circleci.com/pipelines/github/facebook/rocksdb/27912/workflows/4c63e5a8-597e-439d-8c7e-82308056af02/jobs/609648 and similar PR https://github.com/facebook/rocksdb/issues/11271
Had to fix the semantics of FaultInjectionTestFS Close() operations to allow a non-OK Close() to fulfill the obligation to close before destruction. To me, this is the obvious choice of Close contract, because what is the caller supposed to do if Close() fails and they still have an obligation to successfully close before object destruction? Call Close() in an infinite loop? Leak the object? I have added API comments to the Env and Filesystem Close() functions to clarify the contracts.
Note that `DB::Close()` has one exception to this kind of Close contract, but it is clearly described in API comments and it is really only for catching programming mistakes, not for dealing with exogenous errors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11499
Test Plan: watch CI
Reviewed By: jowlyzhang
Differential Revision: D46375708
Pulled By: pdillinger
fbshipit-source-id: 03d4d8251e5df50a82ecd139f7e83f613015fe40
Summary:
Start to record the value of the flag `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` in the Manifest and table properties for a SST file when it is created. And use the recorded flag when creating a table reader for the SST file. This flag's default value is true, it is only explicitly recorded if it's false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11515
Test Plan:
```
make all check
./version_edit_test
```
Reviewed By: ltamasi
Differential Revision: D46920386
Pulled By: jowlyzhang
fbshipit-source-id: 075c20363d3d2cc1368422ecc805617ed135cc26
Summary:
... so that a non-cryptographic whole file checksum would be highly resistant
to manipulation by a user able to manipulate key-value data (e.g. a user whose data is
stored in RocksDB) and able to predict SST metadata such as DB session id and file
number based on read access to logs or DB files. The adversary would also need to predict
the salt in order to influence the checksum result toward collision with another file's
checksum.
This change is just internal code to support such a future feature. I think this should be a
passive feature, not option-controlled, because you probably won't think about needing it
until you discover you do need it, and it should be low cost, in space (16 bytes per SST
file) and CPU.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11331
Test Plan: Unit tests added to verify at least pseudorandom behavior. (Actually caught a bug in first draft!) The new "stress" style tests run in ~3ms each on my system.
Reviewed By: ajkr
Differential Revision: D46129415
Pulled By: pdillinger
fbshipit-source-id: 7972dc74487e062b29b1fd9c227425e922c98796
Summary:
The class `NewCompactOnDeletionCollectorFactory` exposes the parameter `delete_ratio`.
The C API `rocksdb_options_add_compact_on_deletion_collector_factory` does not allow a user to pass a delete ration to be passed down the the C++ class bellow.
The class has default value for the delete ratio which makes it pass the compilation and the tests.
closes https://github.com/facebook/rocksdb/issues/11541
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11542
Reviewed By: ajkr
Differential Revision: D46770908
Pulled By: cbi42
fbshipit-source-id: 7b5162fe459896052e392e2d85a8f6c01db3b464
Summary:
Calling `Flush` (even with `wait==true`) does not guarantee that obsolete WAL files are physically deleted before the call returns. The patch attempts to fix the resulting flakiness by using `SyncPoint`s to make sure `PurgeObsoleteFiles` finishes before checking for WAL deletions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11537
Test Plan:
```
gtest-parallel --repeat=1000 ./db_wal_test --gtest_filter="*SkipDeletedWALs*"
```
Reviewed By: pdillinger
Differential Revision: D46736050
Pulled By: ltamasi
fbshipit-source-id: 47a931b7a3a03ef681fbf4adb5a0b223d452703e
Summary:
`StressTest::optimistic_txn_db_` is currently not initialized by the constructor, which
can lead to assertion failures down the line in `StressTest::Open`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11547
Reviewed By: cbi42
Differential Revision: D46845658
Pulled By: ltamasi
fbshipit-source-id: 578b0f24fc00e3e97f24221fcdd003cc529439c2
Summary:
Context:
OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB.
1. Adding the following gflag options to to test OptimisticTransactionDB
- `use_optimistic_txn`: When true, open OptimisticTransactionDB to test
- `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default.
- `share_occ_lock_buckets`: Use shared occ locks
- `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock.
2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc`
3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk
Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513
Test Plan:
**Crash Test**
Serial Validation
```
export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0"
make crash_test -j
```
Parallel Validation (no share bucket)
```
export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0"
make crash_test -j
```
Parallel Validation (share bucket)
```
export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500"
make crash_test -j
```
**Stress Test**
```
./db_stress -use_optimistic_txn -threads=32
```
Reviewed By: pdillinger
Differential Revision: D46547387
Pulled By: jaykorean
fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
Summary:
**Context/Summary:**
When db is upgrading to adopt [pr11406](https://github.com/facebook/rocksdb/pull/11406/), it's possible for RocksDB to infer a small tail size to prefetch for pre-upgrade files. Such small tail size would have caused 1 file read per index or filter partition if partitioned index or filer is used. This PR provides a UT to show this would not happen.
Misc: refactor the related UTs a bit to make this new UT more readable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11522
Test Plan:
- New UT
If logic of upgrade is wrong e.g,
```
--- a/table/block_based/partitioned_index_reader.cc
+++ b/table/block_based/partitioned_index_reader.cc
@@ -166,7 +166,8 @@ Status PartitionIndexReader::CacheDependencies(
uint64_t prefetch_len = last_off - prefetch_off;
std::unique_ptr<FilePrefetchBuffer> prefetch_buffer;
if (tail_prefetch_buffer == nullptr || !tail_prefetch_buffer->Enabled() ||
- tail_prefetch_buffer->GetPrefetchOffset() > prefetch_off) {
+ (false && tail_prefetch_buffer->GetPrefetchOffset() > prefetch_off)) {
```
, then the UT will fail like below
```
[ RUN ] PrefetchTailTest/PrefetchTailTest.UpgradeToTailSizeInManifest/0
file/prefetch_test.cc:461: Failure
Expected: (db_open_file_read.count) < (num_index_partition), actual: 38 vs 33
Received signal 11 (Segmentation fault)
```
Reviewed By: pdillinger
Differential Revision: D46546707
Pulled By: hx235
fbshipit-source-id: 9897b0a975e9055963edac5451fd1cd9d6c45d0e
Summary:
Fix the error handling in `GetHostName` for non EFAULT, non EINVAL error. Current handling will cause stack overflow when non null-terminated c style string is in `name`, e.g. ENAMETOOLONG, when the `name` buffer is not big enough and the host name is truncated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11544
Test Plan:
```
COMPILE_WITH_ASAN=1 make all check
```
Reviewed By: pdillinger
Differential Revision: D46775799
Pulled By: jowlyzhang
fbshipit-source-id: e0fc9400c50fe38bc1fd888b4fea5fe8706165bf
Summary:
This ticker combined with `rocksdb.files.marked.trash` can help give a better picture of how DeleteScheduler is keeping up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11540
Test Plan:
```
./delete_scheduler_test
```
Reviewed By: ajkr
Differential Revision: D46746401
Pulled By: jowlyzhang
fbshipit-source-id: f3daa622aa3ddefe7d673e0cc257a47699d506df
Summary:
The original Feature Request is from [https://github.com/facebook/rocksdb/issues/11317](https://github.com/facebook/rocksdb/issues/11317).
Flink uses rocksdb as the state backend, all DB options are the same, and the keys of each DB instance are adjacent and there is no key overlap between two db instances.
In the Flink rescaling scenario, it is necessary to quickly split the DB according to a certain key range or quickly merge multiple DBs into one.
This PR is mainly used to quickly merge multiple DBs into one.
We hope to extend the function of `CreateColumnFamilyWithImports` to support creating ColumnFamily by importing multiple ColumnFamily with no overlapping keys.
The import logic is almost the same as `CreateColumnFamilyWithImport`, but it will check whether there is key overlap between CF when importing. The import will fail if there are key overlaps.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11378
Reviewed By: ajkr
Differential Revision: D46413709
Pulled By: cbi42
fbshipit-source-id: 846d0049fad11c59cf460fa846c345b26c658dfb
Summary:
Use another static object to join threads instead.
This change is motivated by a case in which some code using NewLRUCache() -> ShardedCacheBase -> SemiStructuredUniqueIdGen -> GenerateRawUniqueId() -> Env::Default() was happening
during static destruction.
I didn't see anything else in PosixEnv or base classes that would cause a problem by not
destroying. (WinEnv is already not destroyed; see env_default.cc)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11538UndefinedBehaviorSanitizer: undefined-behavior env/env_test.cc:3561:23 in
$
```
Test Plan:
test added, which would previously fail with UBSAN:
```
$ ./env_test --gtest_filter=*Destruct*
Note: Google Test filter = *Destruct*
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from EnvTestMisc
[ RUN ] EnvTestMisc.StaticDestruction
[ OK ] EnvTestMisc.StaticDestruction (0 ms)
[----------] 1 test from EnvTestMisc (0 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (0 ms total)
[ PASSED ] 1 test.
env/env_test.cc:3561:23: runtime error: member call on address 0x7f7b96671ca8 which does not point to an object of type 'rocksdb::Env'
0x7f7b96671ca8: note: object is of type 'N7rocksdb12ConfigurableE'
00 00 00 00 90 a7 f7 95 7b 7f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^~~~~~~~~~~~~~~~~~~~~~~
vptr for 'N7rocksdb12ConfigurableE'
Reviewed By: jowlyzhang
Differential Revision: D46737389
Pulled By: pdillinger
fbshipit-source-id: 0f80a443bf799ffc5641e898cf3a75f7d10a987b
Summary:
when a DB is configured with `allow_ingest_behind = true`, the last level should be reserved for ingested files and these files should not be included in any compaction. Currently, a major compaction can compact these files to smaller levels. This can cause future files to be rejected for ingest behind (see `ExternalSstFileIngestionJob::CheckLevelForIngestedBehindFile()`). This PR fixes the issue such that files in the last level is not included in any compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11489
Test Plan: * Updated unit test `ExternalSSTFileTest.IngestBehind` to test that last level is not included in manual and auto-compaction.
Reviewed By: ajkr
Differential Revision: D46455711
Pulled By: cbi42
fbshipit-source-id: 5e2142c2a709ef932ad797897795021c06c4ac8c
Summary:
See "unreleased_history/new_features/obsolete_sst_files_size.md" for description
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11533
Test Plan: updated unit test
Reviewed By: jowlyzhang
Differential Revision: D46703152
Pulled By: ajkr
fbshipit-source-id: ea5e31cd6293eccc154130c13e66b5271f57c102
Summary:
the first CI step "Check buck targets and code format..." is failing with the following error message:
```
Download action repository 'wei/wget@v1' (SHA:c15e476d1463f4936cb54f882170d9d631f1aba5)
Error: An action could not be found at the URI 'https://api.github.com/repos/wei/wget/tarball/c15e476d1463f4936cb54f882170d9d631f1aba5'
```
Not sure why the action is lost, but it seems we can use wget directly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11532
Test Plan: watch CI job "Check buck targets and code format" passes
Reviewed By: ltamasi
Differential Revision: D46700626
Pulled By: cbi42
fbshipit-source-id: 53c09f27965444b533b3fe3755aec922571bba2c
Summary:
Add new tickers: `rocksdb.error.handler.bg.error.count`, `rocksdb.error.handler.bg.io.error.count`, `rocksdb.error.handler.bg.retryable.io.error.count` to replace the misspelled ones: `rocksdb.error.handler.bg.errro.count`, `rocksdb.error.handler.bg.io.errro.count`, `rocksdb.error.handler.bg.retryable.io.errro.count` ('error' instead of 'errro'). Users should switch to use the new tickers before 9.0 release as the misspelled old tickers will be completely removed then.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11509
Reviewed By: ltamasi
Differential Revision: D46542809
Pulled By: jowlyzhang
fbshipit-source-id: a2a6d8354af46a060de81d40ef6f5336a80bd32e
Summary:
Fix a use-after-move issue in block.cc and added some unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11505
Test Plan:
```
make all check
./block_test
```
Reviewed By: ltamasi
Differential Revision: D46506188
Pulled By: jowlyzhang
fbshipit-source-id: 316ed8ddd221c00b2bce2cf9fd47eea686cd74a5
Summary:
Support was added in 8.1.0
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11517
Test Plan: comments only
Reviewed By: anand1976
Differential Revision: D46489929
Pulled By: pdillinger
fbshipit-source-id: 4fd30078389065c9ec225bf55b6773f1641f0646
Summary:
**Context:**
[PR11406](https://github.com/facebook/rocksdb/pull/11406/) caused more frequent read during db open reading files with no `tail_size` in the manifest as part of the upgrade to 11406. This is due to that PR introduced
- [smaller](https://github.com/facebook/rocksdb/pull/11406/files#diff-57ed8c49db2bdd4db7618646a177397674bbf25beacacecb104070071d30129fR833) prefetch tail buffer size compared to pre-11406 for small files (< 52 MB) when `tail_prefetch_stats` infers tail size to be 0 (usually happens when the stats does not have much historical data to infer early on)
- more read (up to # of partitioned filter/index) when such small prefetch tail buffer does not contain all the partitioned filter/index needed in CacheDependencies() since the [fallback logic](https://github.com/facebook/rocksdb/pull/11406/files#diff-d98f1a83de24412ad7f3527725dae7e28851c7222622c3cdb832d3cdf24bbf9fR165-R179) that prefetches all partitions at once will be [skipped](url) when such a small prefetch tail buffer is passed in
**Summary:**
- Revert the fallback prefetch buffer size change to preserve existing behavior fully during upgrading in `BlockBasedTable::PrefetchTail()`
- Use passed-in prefetch tail buffer in `CacheDependencies()` only if it has a smaller offset than the the offset of first partition filter/index, that is, at least as good as the existing prefetching behavior
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11516
Test Plan:
- db bench
Create db with small files prior to PR 11406
```
./db_bench -db=/tmp/testdb/ --partition_index_and_filters=1 --statistics=1 -benchmarks=fillseq -key_size=3200 -value_size=5 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=true -compression_type=zstd`
```
Read db to see if post-pr has lower read qps (i.e, rocksdb.file.read.db.open.micros count) during db open.
```
./db_bench -use_direct_reads=1 --file_opening_threads=1 --threads=1 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 --db=/tmp/testdb/ --benchmarks=readrandom --key_size=3200 --value_size=5 --num=100 --disable_auto_compactions=true --compression_type=zstd
```
Pre-PR:
```
rocksdb.file.read.db.open.micros P50 : 3.399023 P95 : 5.924468 P99 : 12.408333 P100 : 29.000000 COUNT : 611 SUM : 2539
```
Post-PR:
```
rocksdb.file.read.db.open.micros P50 : 593.736842 P95 : 861.605263 P99 : 1212.868421 P100 : 2663.000000 COUNT : 585 SUM : 345349
```
_Note: To control the starting offset of the prefetch tail buffer easier, I manually override the following to eliminate the effect of alignment_
```
class PosixRandomAccessFile : public FSRandomAccessFile {
virtual size_t GetRequiredBufferAlignment() const override {
- return logical_sector_size_;
+ return 1;
}
```
- CI
Reviewed By: pdillinger
Differential Revision: D46472566
Pulled By: hx235
fbshipit-source-id: 2fe14ac8d489d15b0e08e6f8fe4f46d5f110978e
Summary:
Fix the test added in https://github.com/facebook/rocksdb/issues/11459 that is failing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11512
Test Plan: `./db_range_del_test --gtest_filter="*NonBottommostCompactionDropRangetombstone"`
Reviewed By: pdillinger
Differential Revision: D46451450
Pulled By: cbi42
fbshipit-source-id: bcad20b8fd21c4f71924cec6cb045ee4b2038b90
Summary:
Switch from std::unordered_map to RocksDB UnorderedMap for all the places that logging user-defined timestamp size in WAL used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11507
Test Plan:
```
make all check
```
Reviewed By: ltamasi
Differential Revision: D46448975
Pulled By: jowlyzhang
fbshipit-source-id: bdb4d56a723b697a33daaf0f856a61d49a367a99
Summary:
Similar to point tombstones, we can drop a range tombstone during compaction when we know its range does not exist in any higher level. This PR adds this optimization. Some existing test in db_range_del_test is fixed to work under this optimization.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11459
Test Plan:
* Add unit test `DBRangeDelTest, NonBottommostCompactionDropRangetombstone`.
* Ran crash test that issues range deletion for a few hours: `python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=1048576 --delrangepercent=10 --writepercent=31 --readpercent=40`
Reviewed By: ajkr
Differential Revision: D46007904
Pulled By: cbi42
fbshipit-source-id: 3f37205b6778b7d55ed106369ca41b0632a6d0fd
Summary:
Follow a couple best practices:
- Allowed Google benchmark to decide number of iterations. Previously we hardcoded a value, which circumvented benchmark's heuristic for iterating until the result is stable.
- Made each iteration do similar work. Previously, an iteration could do different work depending if the key was found in the first, second, third, or no L0 file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11498
Test Plan: none as I am unable to prove it is better
Reviewed By: hx235
Differential Revision: D46339050
Pulled By: ajkr
fbshipit-source-id: fcfc6da4111c5b3ae86d79d908afc5f61f96675b
Summary:
currently for leveled compaction, the max output level of a call to `CompactRange()` is pre-computed before compacting each level. This max output level is the max level whose key range overlaps with the manual compaction key range. However, during manual compaction, files in the max output level may be compacted down further by some background compaction. When this background compaction is a trivial move, there is a race condition and the manual compaction may not be able to compact all keys in the specified key range. This PR updates `CompactRange()` to always compact to the bottommost level to make this race condition more unlikely (it can still happen, see more in comment here: https://github.com/cbi42/rocksdb/blob/796f58f42ad1bdbf49e5fcf480763f11583b790e/db/db_impl/db_impl_compaction_flush.cc#L1180C29-L1184).
This PR also changes the behavior of CompactRange() when `bottommost_level_compaction=kIfHaveCompactionFilter` (the default option). The old behavior is that, if a compaction filter is provided, CompactRange() always does an intra-level compaction at the final output level for all files in the manual compaction key range. The only exception when `first_overlapped_level = 0` and `max_overlapped_level = 0`. It’s awkward to maintain the same behavior after this PR since we do not compute max_overlapped_level anymore. So the new behavior is similar to kForceOptimized: always does intra-level compaction at the bottommost level, but not including new files generated during this manual compaction.
Several unit tests are updated to work with this new manual compaction behavior.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11468
Test Plan: Add new unit tests `DBCompactionTest.ManualCompactionCompactAllKeysInRange*`
Reviewed By: ajkr
Differential Revision: D46079619
Pulled By: cbi42
fbshipit-source-id: 19d844ba4ec8dc1a0b8af5d2f36ff15820c6e76f
Summary:
Add support to strip timestamp in block based table builder and pad timestamp in block based table reader.
On the write path, use the per column family option `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` to indicate whether user-defined timestamps should be stripped for all block based tables created for the column family.
On the read path, added a per table `TableReadOption.user_defined_timestamps_persisted` to flag whether the user keys in the table contains user defined timestamps.
This patch is mostly passing the related flags down to the block building/parsing level with the exception of handling the `first_internal_key` in `IndexValue`, which is included in the `IndexBuilder` level. The value part of range deletion entries should have a similar handling, I haven't decided where to best fit this piece of logic, I will do it in a follow up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11495
Test Plan:
Existing test `BlockBasedTableReaderTest` is parameterized to run with:
1) different UDT test modes: kNone, kNormal, kStripUserDefinedTimestamp
2) all four index types, when index type is `kTwoLevelIndexSearch`, also enables partitioned filters
3) parallel vs non-parallel compression
4) enable/disable compression dictionary.
Also added tests for API `BlockBasedTableReader::NewIterator`.
`PartitionedFilterBlockTest` is parameterized to run with different UDT test modes:kNone, kNormal, kStripUserDefinedTimestamp.
```
make all check
./block_based_table_reader_test
./partitioned_filter_block_test
```
Reviewed By: ltamasi
Differential Revision: D46344577
Pulled By: jowlyzhang
fbshipit-source-id: 93ac8542b19319d1298712b8bed908c8831ba675
Summary:
I got the following errors when running `unreleased_history/release.sh` on my mac. This is due to mac does not have gnu version of awk and find by default. This PR updates the script to work on macOS.
```
awk: calling undefined function strftime
input record number 43, file
source line number 4
find: -regextype: unknown primary or operator
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11494
Test Plan: manually run `DRY_RUN=1 unreleased_history/release.sh | less` on macOS and CentOS8 machines.
Reviewed By: ajkr
Differential Revision: D46328442
Pulled By: cbi42
fbshipit-source-id: a7570cd3480fcd25ac1438beb0d59fe655f9a71a
Summary:
Context:
As mentioned in https://github.com/facebook/rocksdb/issues/11436, introducing `flush` option in `WaitForCompactOptions` to flush before waiting for compactions to finish. Must be set to true to ensure no immediate compactions (except perhaps periodic compactions) after closing and re-opening the DB.
1. `bool flush = false` added to `WaitForCompactOptions`
2. `DBImpl::FlushAllColumnFamilies()` is introduced and `DBImpl::FlushForGetLiveFiles()` is refactored to call it.
3. `DBImpl::FlushAllColumnFamilies()` gets called before waiting in `WaitForCompact()` if `flush` option is `true`
4. Some previous WaitForCompact tests were parameterized to include both cases for `abort_on_pause_` being true/false as well as `flush_` being true/false
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11483
Test Plan:
- `DBCompactionTest::WaitForCompactWithOptionToFlush` added
- Changed existing DBCompactionTest::WaitForCompact tests to `DBCompactionWaitForCompactTest` to include params
Reviewed By: pdillinger
Differential Revision: D46289770
Pulled By: jaykorean
fbshipit-source-id: 70d3f461d96a6e06390be60170dd7c4d0d38f8b0
Summary:
Start logging the timestamp size record in WAL and use the record during recovery. Currently, user comparator cannot be different from what was used to create a column family, so the timestamp size record is just used to confirm it's consistent with the timestamp size the running user comparator indicates.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11471
Test Plan:
```
make all check
./db_secondary_test
./db_wal_test --gtest_filter="*WithTimestamp*"
./repair_test --gtest_filter="*WithTimestamp*"
```
Reviewed By: ltamasi
Differential Revision: D46236769
Pulled By: jowlyzhang
fbshipit-source-id: f6c60b5c8defdb05021c63df302ccc0be1275ad0
Summary:
See new NOTE in HISTORY.md and unreleased_history/README.txt
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11481
Test Plan: some manual testing on my CentOS 8 system
Reviewed By: jaykorean
Differential Revision: D46233342
Pulled By: pdillinger
fbshipit-source-id: daf59cf3dc907f450b469090dcc481a30a7d7c0d
Summary:
This draft PR implements charging of reserved memory, for write buffers, table readers, and other purposes, proportionally to the block cache and the compressed secondary cache. The basic flow of memory reservation is maintained - clients use ```CacheReservationManager``` to request reservations, and ```CacheReservationManager``` inserts placeholder entries, i.e null value and non-zero charge, into the block cache. The ```CacheWithSecondaryAdapter``` wrapper uses its own instance of ```CacheReservationManager``` to keep track of reservations charged to the secondary cache, while the placeholder entries are inserted into the primary block cache. The design is as follows.
When ```CacheWithSecondaryAdapter``` is constructed with the ```distribute_cache_res``` parameter set to true, it manages the entire memory budget across the primary and secondary cache. The secondary cache is assumed to be in memory, such as the ```CompressedSecondaryCache```. When a placeholder entry is inserted by a CacheReservationManager instance to reserve memory, the ```CacheWithSecondaryAdapter```ensures that the reservation is distributed proportionally across the primary/secondary caches.
The primary block cache is initially sized to the sum of the primary cache budget + the secondary cache budget, as follows -
|--------- Primary Cache Configured Capacity -----------|
|---Secondary Cache Budget----|----Primary Cache Budget-----|
A ```ConcurrentCacheReservationManager``` member in the ```CacheWithSecondaryAdapter```, ```pri_cache_res_```, is used to help with tracking the distribution of memory reservations. Initially, it accounts for the entire secondary cache budget as a reservation against the primary cache. This shrinks the usable capacity of the primary cache to the budget that the user originally desired.
|--Reservation for Sec Cache--|-Pri Cache Usable Capacity---|
When a reservation placeholder is inserted into the adapter, it is inserted directly into the primary cache. This means the entire charge of the placeholder is counted against the primary cache. To compensate and count a portion of it against the secondary cache, the secondary cache ```Deflate()``` method is called to shrink it. Since the ```Deflate()``` causes the secondary actual usage to shrink, it is reflected here by releasing an equal amount from the ```pri_cache_res_``` reservation.
For example, if the pri/sec ratio is 50/50, this would be the state after placeholder insertion -
|-Reservation for Sec Cache-|-Pri Cache Usable Capacity-|-R-|
Likewise, when the user inserted placeholder is released, the secondary cache ```Inflate()``` method is called to grow it, and the ```pri_cache_res_``` reservation is increased by an equal amount.
Other alternatives -
1. Another way of implementing this would have been to simply split the user reservation in ```CacheWithSecondaryAdapter``` into primary and secondary components. However, this would require allocating a structure to track the associated secondary cache reservation, which adds some complexity and overhead.
2. Yet another option is to implement the splitting directly in ```CacheReservationManager```. However, there are multiple instances of ```CacheReservationManager``` in a DB instance, making it complicated to keep track of them.
The PR contains the following changes -
1. A new cache allocator, ```NewTieredVolatileCache()```, is defined for allocating a tiered primary block cache and compressed secondary cache. This internally allocates an instance of ```CacheWithSecondaryAdapter```.
3. New interfaces, ```Deflate()``` and ```Inflate()```, are added to the ```SecondaryCache``` interface. The default implementaion returns ```NotSupported``` with overrides in ```CompressedSecondaryCache```.
4. The ```CompressedSecondaryCache``` uses a ```ConcurrentCacheReservationManager``` instance to manage reservations done using ```Inflate()/Deflate()```.
5. The ```CacheWithSecondaryAdapter``` optionally distributes memory reservations across the primary and secondary caches. The primary cache is sized to the total memory budget (primary + secondary), and the capacity allocated to secondary cache is "reserved" against the primary cache. For any subsequent reservations, the primary cache pre-reserved capacity is adjusted.
Benchmarks -
Baseline
```
time ~/rocksdb_anand76/db_bench --db=/dev/shm/comp_cache_res/base --use_existing_db=true --benchmarks="readseq,readwhilewriting" --key_size=32 --value_size=1024 --num=20000000 --threads=32 --bloom_bits=10 --cache_size=30000000000 --use_compressed_secondary_cache=true --compressed_secondary_cache_size=5000000000 --duration=300 --cost_write_buffer_to_cache=true
```
```
readseq : 3.301 micros/op 9694317 ops/sec 66.018 seconds 640000000 operations; 9763.0 MB/s
readwhilewriting : 22.921 micros/op 1396058 ops/sec 300.021 seconds 418846968 operations; 1405.9 MB/s (13068999 of 13068999 found)
real 6m31.052s
user 152m5.660s
sys 26m18.738s
```
With TieredVolatileCache
```
time ~/rocksdb_anand76/db_bench --db=/dev/shm/comp_cache_res/base --use_existing_db=true --benchmarks="readseq,readwhilewriting" --key_size=32 --value_size=1024 --num=20000000 --threads=32 --bloom_bits=10 --cache_size=30000000000 --use_compressed_secondary_cache=true --compressed_secondary_cache_size=5000000000 --duration=300 --cost_write_buffer_to_cache=true --use_tiered_volatile_cache=true
```
```
readseq : 4.064 micros/op 7873915 ops/sec 81.281 seconds 640000000 operations; 7929.7 MB/s
readwhilewriting : 20.944 micros/op 1527827 ops/sec 300.020 seconds 458378968 operations; 1538.6 MB/s (14296999 of 14296999 found)
real 6m42.743s
user 157m58.972s
sys 33m16.671
```
```
readseq : 3.484 micros/op 9184967 ops/sec 69.679 seconds 640000000 operations; 9250.0 MB/s
readwhilewriting : 21.261 micros/op 1505035 ops/sec 300.024 seconds 451545968 operations; 1515.7 MB/s (14101999 of 14101999 found)
real 6m31.469s
user 155m16.570s
sys 27m47.834s
```
ToDo -
1. Add to db_stress
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11449
Reviewed By: pdillinger
Differential Revision: D46197388
Pulled By: anand1976
fbshipit-source-id: 42d16f0254df683db4929db20d06ff26030e90df
Summary:
Together with the existing constructor,
`explicit WriteBatch(std::string&& rep)`, this enables transferring `WriteBatch` via its `std::string` representation. Associated info like KV checksums are dropped but the caller can use `WriteBatch::VerifyChecksum()` before taking ownership if needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11482
Reviewed By: cbi42
Differential Revision: D46233884
Pulled By: ajkr
fbshipit-source-id: 6bc64a6e75fb7bbf61d08c09520fc3705a7b44d8
Summary:
`output_level_` and `number_levels_` are not changing in iteration of `inputs_` files.
Moving the check out of `for` loop could slightly improve performance.
It is easier to review when ignore whitespace changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11467
Reviewed By: cbi42
Differential Revision: D46155962
Pulled By: ajkr
fbshipit-source-id: 45ec80b13152b3bed7305e6f707cb9b187d5f315
Summary:
Context:
Because of the branch cut, History change made it to the previous release. Moving entry to Unreleased
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11479
Test Plan: History change. Not needed.
Reviewed By: pdillinger
Differential Revision: D46226237
Pulled By: jaykorean
fbshipit-source-id: 33e7d84a05db254d227f05d76038fc6d225dbabf
Summary:
Context:
This is the first PR for WaitForCompact() Implementation with WaitForCompactOptions. In this PR, we are introducing `Status WaitForCompact(const WaitForCompactOptions& wait_for_compact_options)` in the public API. This currently utilizes the existing internal `WaitForCompact()` implementation (with default abort_on_pause = false). `abort_on_pause` has been moved to `WaitForCompactOptions&`. In the later PRs, we will introduce the following two options in `WaitForCompactOptions`
1. `bool flush = false` by default - If true, flush before waiting for compactions to finish. Must be set to true to ensure no immediate compactions (except perhaps periodic compactions) after closing and re-opening the DB.
2. `bool close_db = false` by default - If true, will also close the DB upon compactions finishing.
1. struct `WaitForCompactOptions` added to options.h and `abort_on_pause` in the internal API moved to the option struct.
2. `Status WaitForCompact(const WaitForCompactOptions& wait_for_compact_options)` introduced in `db.h`
3. Changed the internal WaitForCompact() to `WaitForCompact(const WaitForCompactOptions& wait_for_compact_options)` and checks for the `abort_on_pause` inside the option.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11436
Test Plan:
Following tests added
- `DBCompactionTest::WaitForCompactWaitsOnCompactionToFinish`
- `DBCompactionTest::WaitForCompactAbortOnPauseAborted`
- `DBCompactionTest::WaitForCompactContinueAfterPauseNotAborted`
- `DBCompactionTest::WaitForCompactShutdownWhileWaiting`
- `TransactionTest::WaitForCompactAbortOnPause`
NOTE: `TransactionTest::WaitForCompactAbortOnPause` was added to use `StackableDB` to ensure the wrapper function is in place.
Reviewed By: pdillinger
Differential Revision: D45799659
Pulled By: jaykorean
fbshipit-source-id: b5b58f95957f2ab47d1221dee32a61d6cdc4685b
Summary:
This patch adds support in `BlockBuilder` to strip user-defined timestamp from the `key` added via `Add(key, value)` and its equivalent APIs. The stripping logic is different when the key is either a user key or an internal key, so the `BlockBuilder` is created with a flag to indicate that. This patch also add support on the read path to APIs `NewIndexIterator`, `NewDataIterator` to support pad a min timestamp.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11472
Test Plan:
Three test modes are added to parameterize existing tests:
UserDefinedTimestampTestMode::kNone -> UDT feature is not enabled
UserDefinedTimestampTestMode::kNormal -> UDT feature enabled, write / read with min timestamp
UserDefinedTimestampTestMode::kStripUserDefinedTimestamps -> UDT feature enabled, write / read with min timestamp, set `persist_user_defined_timestamps` where it applies to false.
The tests read/write with min timestamp so that point read and range scan can correctly read values in all three test modes.
`block_test` are parameterized to run with above three test modes and some additional parameteriazation
```
make all check
./block_test --gtest_filter="P/BlockTest*"
./block_test --gtest_filter="P/IndexBlockTest*"
```
Reviewed By: ltamasi
Differential Revision: D46200539
Pulled By: jowlyzhang
fbshipit-source-id: 59f5d6b584639976b69c2943eba723bd47d9b3c0
Summary:
It's easy to mix up the ordering when it's undocumented. For an example of the meaning of the order, see DBTest.ThreadStatusFlush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11477
Test Plan: comments only
Reviewed By: jaykorean
Differential Revision: D46166683
Pulled By: pdillinger
fbshipit-source-id: 33118ba7ef1b08eab7b077548fe2e70f2c309e3f
Summary:
Currently it's easy to use a ton of memory with many small OptimisticTransactionDB instances, because each one by default allocates a million mutexes (40 bytes each on my compiler) for validating transactions. It even puts a lot of pressure on the allocator by allocating each one individually!
In this change:
* Create a new object and option that enables sharing these buckets of mutexes between instances. This is generally good for load balancing potential contention as various DBs become hotter or colder with txn writes. About the only cases where this sharing wouldn't make sense (e.g. each DB usually written by one thread) are cases that would be better off with OccValidationPolicy::kValidateSerial which doesn't use the buckets anyway.
* Allocate the mutexes in a contiguous array, for efficiency
* Add an option to ensure the mutexes are cache-aligned. In several other places we use cache-aligned mutexes but OptimisticTransactionDB historically does not. It should be a space-time trade-off the user can choose.
* Provide some visibility into the memory used by the mutex buckets with an ApproximateMemoryUsage() function (also used in unit testing)
* Share code with other users of "striped" mutexes, appropriate refactoring for customization & efficiency (e.g. using FastRange instead of modulus)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11439
Test Plan: unit tests added. Ran sized-up versions of stress test in unit test, including a before-and-after performance test showing no consistent difference. (NOTE: OptimisticTransactionDB not currently covered by db_stress!)
Reviewed By: ltamasi
Differential Revision: D45796393
Pulled By: pdillinger
fbshipit-source-id: ae2b3a26ad91ceeec15debcdc63ff48df6736a54
Summary:
Add the following missing options to `src/main/java/org/rocksdb/CompactRangeOptions.java` and in `java/rocksjni/options.cc` in RocksJava.
For the descriptions and API see the C++ file `include/rocksdb/options.h`, specifically the struct `CompactRangeOptions`
* full_history_ts_low
* canceled
We changed the handle to return an object (of class `Java_org_rocksdb_CompactRangeOptions`) containing a `ROCKSDB_NAMESPACE::CompactRangeOptions` at (almost certainly) 0-offset, rather than a raw `ROCKSDB_NAMESPACE::CompactRangeOptions`.
The `Java_org_rocksdb_CompactRangeOptions` contains as supplementary fields objects (std::string, std::atomic<bool>) which are passed as pointers to the `ROCKSDB_NAMESPACE::CompactRangeOptions` and which must therefore live for as long as the `ROCKSDB_NAMESPACE::CompactRangeOptions`. By placing them in a `Java_org_rocksdb_CompactRangeOptions` we achieve this.
Because the field offset of the `ROCKSDB_NAMESPACE::CompactRangeOptions` member is (very probably) 0, casting the handle to ROCKSDB_NAMESPACE::CompactRangeOptions works (i.e. old methods didn’t have to be changed), but really that’s a minefield and the correct answer is to cast to the correct type (Java_org_rocksdb_CompactRangeOptions) and then use the ROCKSDB_NAMESPACE::CompactRangeOptions field in that. So the get/set methods for existing parameters have this change.
Testing
-------
We added unit tests for getting and setting the newly implemented fields to `CompactRangeOptionsTest`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10880
Reviewed By: ajkr
Differential Revision: D41482476
Pulled By: anand1976
fbshipit-source-id: c70795e790436fb3544655920adf6fca62ed34e2
Summary:
- add TEST_TMPDIR_EXPECTED env in crash test if expected dir is on different filesystem. If TEST_TMPDIR_EXPECTED is not specified, it'll fallback to default value of TEST_TMPDIR (Same as before)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11448
Test Plan: Ran locally
Reviewed By: anand1976
Differential Revision: D45870268
Pulled By: akankshamahajan15
fbshipit-source-id: 52a7b961d3647dde023dcf7f20341558e8a5b528
Summary:
Add a util method `HandleWriteBatchTimestampSizeDifference` to handle a `WriteBatch` read from WAL log when user-defined timestamp size record is written and read. Two check modes are added: `kVerifyConsistency` that just verifies the recorded timestamp size are consistent with the running ones. This mode is to be used by `db_impl_secondary` for opening a DB as secondary instance. It will also be used by `db_impl_open` before the user comparator switch support is added to make a column switch between enabling/disable UDT feature. The other mode `kReconcileInconsistency` will be used by `db_impl_open` later when user comparator can be changed.
Another change is to extract a method `CollectColumnFamilyIdsFromWriteBatch` in db_secondary_impl.h into its standalone util file so it can be shared.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11451
Test Plan:
```
make check
./udt_util_test
```
Reviewed By: ltamasi
Differential Revision: D45894386
Pulled By: jowlyzhang
fbshipit-source-id: b96790777f154cddab6d45d9ba2e5d20ebc6fe9d
Summary:
This patch remove the "stress" aspect from the WriteUnpreparedStressTest and leave it to be a unit test for some correctness testing w.r.t. snapshot functionality. I added some read-your-write verification to the transaction test in db_stress.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11424
Test Plan:
`./write_unprepared_transaction_test`
`./db_crashtest.py whitebox --txn`
`./db_crashtest.py blackbox --txn`
Reviewed By: hx235
Differential Revision: D45551521
Pulled By: jowlyzhang
fbshipit-source-id: 20c3d510eb4255b08ddd7b6c85bdb4945436f6e8
Summary:
jemalloc was not building on M1 Macs. This makes it work.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11257
Reviewed By: anand1976
Differential Revision: D45959570
Pulled By: ajkr
fbshipit-source-id: 08c2b81b399f5003a2c159d037f9bcc5d0059556
Summary:
We want to know more about opportunities for better range filters, and the effectiveness of our own range filters. Currently the stats are very limited, essentially logging just hits and misses against prefix filters for range scans in BLOOM_FILTER_PREFIX_* without tracking the false positive rate. Perhaps confusingly, when prefix filters are used for point queries, the stats are currently going into the non-PREFIX tickers.
This change does several things:
* Introduce new stat tickers for seeks and related filtering, \*LEVEL_SEEK\*
* Most importantly, allows us to see opportunities for range filtering. Specifically, we can count how many times a seek in an SST file accesses at least one data block, and how many times at least one value() is then accessed. If a data block was accessed but no value(), we can generally assume that the key(s) seen was(were) not of interest so could have been filtered with the right kind of filter, avoiding the data block access.
* We can get the same level of detail when a filter (for now, prefix Bloom/ribbon) is used, or not. Specifically, we can infer a false positive rate for prefix filters (not available before) from the seek "false positive" rate: when a data block is accessed but no value() is called. (There can be other explanations for a seek false positive, but in typical iterator usage it would indicate a filter false positive.)
* For efficiency, I wanted to avoid making additional calls to the prefix extractor (or key comparisons, etc.), which would be required if we wanted to more precisely detect filter false positives. I believe that instrumenting value() is the best balance of efficiency vs. accurately measuring what we are often interested in.
* The stats are divided between last level and non-last levels, to help understand potential tiered storage use cases.
* The old BLOOM_FILTER_PREFIX_* stats have a different meaning: no longer referring to iterators but to point queries using prefix filters. BLOOM_FILTER_PREFIX_TRUE_POSITIVE is added for computing the prefix false positive rate on point queries, which can be due to filter false positives as well as different keys with the same prefix.
* Similarly, the non-PREFIX BLOOM_FILTER stats are now for whole key filtering only.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11460
Test Plan:
unit tests updated, including updating many to pop the stat value since last read to improve test
readability and maintainability.
Performance test shows a consistent small improvement with these changes, both with clang and with gcc. CPU profile indicates that RecordTick is using less CPU, and this makes sense at least for a high filter miss rate. Before, we were recording two ticks per filter miss in iterators (CHECKED & USEFUL) and now recording just one (FILTERED).
Create DB with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8
```
And run simultaneous before&after with
```
TEST_TMPDIR=/dev/shm ./db_bench -readonly -benchmarks=seekrandom[-X1000] -num=10000000 -bloom_bits=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8 -seek_nexts=1 -duration=20 -seed=43 -threads=8 -cache_size=1000000000 -statistics
```
Before: seekrandom [AVG 275 runs] : 189680 (± 222) ops/sec; 18.4 (± 0.0) MB/sec
After: seekrandom [AVG 275 runs] : 197110 (± 208) ops/sec; 19.1 (± 0.0) MB/sec
Reviewed By: ajkr
Differential Revision: D46029177
Pulled By: pdillinger
fbshipit-source-id: cdace79a2ea548d46c5900b068c5b7c3a02e5822
Summary:
Add two type aliases for Cache: BlockCache and GeneralCache, and add LRUCacheOptions::MakeSharedGeneralCache(). This will ease upgrade to an intended future change to separate the cache API between block cache and other (general) uses, including row cache. Separating the APIs will make it easier to expose more details of block caching for customization. For example, it would be nice to pass the file unique ID and offset as the logical cache key instead of using a Slice, which could facilitate some file-specific customizations in block cache. This would also make it clear that HyperClockCache is not usable as a general cache, because it can only deal with fixed-size block cache keys.
block_cache, row_cache, and blob_cache are the uses of Cache in the public API. blob_cache should be able to use BlockCache while row_cache is a GeneralCache user, as its keys are of arbitrary size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11450
Test Plan: see updated unit test.
Reviewed By: anand1976
Differential Revision: D45882067
Pulled By: pdillinger
fbshipit-source-id: ff5d9f0b644f87ae337a29a7728ce3ed07b2a4b2
Summary:
This PR is part of the request https://github.com/facebook/rocksdb/issues/11317.
(Another part is https://github.com/facebook/rocksdb/pull/11378)
ClipDB() will clip the entries in the CF according to the range [begin_key, end_key). All the entries outside this range will be completely deleted (including tombstones).
This feature is mainly used to ensure that there is no overlapping Key when calling CreateColumnFamilyWithImports() to import multiple CFs.
When Calling ClipDB [begin, end), there are the following steps
1. Quickly and directly delete files without overlap
DeleteFilesInRanges(nullptr, begin) + DeleteFilesInRanges(end, nullptr)
2. Delete the Key outside the range
Delete[smallest_key, begin) + Delete[end, largest_key]
3. Delete the tombstone through Manul Compact
CompactRange(option, nullptr, nullptr)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11379
Reviewed By: ajkr
Differential Revision: D45840358
Pulled By: cbi42
fbshipit-source-id: 54152e8a45fd8ede137f99787eb252f0b51440a4
Summary:
**Context/Summary:**
https://github.com/facebook/rocksdb/pull/11424 made me realize there are a couple gaps in my `ExpectedValue` comments so I updated them, along with separating `ExpectedValue` into separate files so it's clearer that `ExpectedValue` can be used without updating `ExpectedState` (e.g, TestMultiGet() where we care about value base of expected value but not updating the ExpectedState).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11456
Test Plan: CI
Reviewed By: jowlyzhang
Differential Revision: D45965070
Pulled By: hx235
fbshipit-source-id: dcee690c13b00a3119757ea9d43b646f9644e1a9
Summary:
Apply a small (and automatic) set of IntelliJ Java inspections/repairs to the Java interface to RocksDB Java and its tests.
Partly enabled by the fact that we now (from RocksDB7) require java 8.
Explicit <p> in empty lines in javadoc comments.
Parameters and variables made final where possible.
Anonymous subclasses converted lambdas.
Some tests which previously used other assertion models were converted to assertj, e.g. (assertThat(actual).isEqualTo(expected)
In a very few cases tests were found to be inoperative or broken, and were repaired. No problems with actual RocksDB behaviour were observed.
This PR is intended to replace https://github.com/facebook/rocksdb/pull/9618 - that PR was not merged, and attempts to rebase it have yielded a questionable looking diff, so we choose to go back to square 1 here, and implement a conservative set of changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10951
Reviewed By: anand1976
Differential Revision: D45057849
Pulled By: ajkr
fbshipit-source-id: e4ea46bfc80518ae86f37702b03ca9352bc11c3d
Summary:
Context:
In pull request https://github.com/facebook/rocksdb/issues/11436, we are introducing a new public API `waitForCompact(const WaitForCompactOptions& wait_for_compact_options)`. This API invokes the internal implementation `waitForCompact(bool wait_unscheduled=false)`. The unscheduled parameter indicates the compactions that are not yet scheduled but are required to process items in the queue.
In certain cases, we are unable to wait for compactions, such as during a shutdown or when background jobs are paused. It is important to return the appropriate status in these scenarios. For all other cases, we should wait for all compaction and flush jobs, including the unscheduled ones. The primary purpose of this new API is to wait until the system has resolved its compaction debt. Currently, the usage of `wait_unscheduled` is limited to test code.
This pull request eliminates the usage of wait_unscheduled. The internal `waitForCompact()` API now waits for unscheduled compactions unless the db is undergoing a shutdown. In the event of a shutdown, the API returns `Status::ShutdownInProgress()`.
Additionally, a new parameter, `abort_on_pause`, has been introduced with a default value of `false`. This parameter addresses the possibility of waiting indefinitely for unscheduled jobs if `PauseBackgroundWork()` was called before `waitForCompact()` is invoked. By setting `abort_on_pause` to `true`, the API will immediately return `Status::Aborted`.
Furthermore, all tests that previously called `waitForCompact(true)` have been fixed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11443
Test Plan:
Existing tests that involve a shutdown in progress:
- DBCompactionTest::CompactRangeShutdownWhileDelayed
- DBTestWithParam::PreShutdownMultipleCompaction
- DBTestWithParam::PreShutdownCompactionMiddle
Reviewed By: pdillinger
Differential Revision: D45923426
Pulled By: jaykorean
fbshipit-source-id: 7dc93fe6a6841a7d9d2d72866fa647090dba8eae
Summary:
In IDE navigation I find it annoying that there are two statistics.h files (etc.) and often land on the wrong one. Here I migrate several headers to use the blah.h <- blah_impl.h <- blah.cc idiom. Although clang-format wants "blah.h" to be the top include for "blah.cc", I think overall this is an improvement.
No public API changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11408
Test Plan: existing tests
Reviewed By: ltamasi
Differential Revision: D45456696
Pulled By: pdillinger
fbshipit-source-id: 809d931253f3272c908cf5facf7e1d32fc507373
Summary:
**Context:**
Current `NonBatchedOpsStressTest` does not allow multi-thread read (i.e, Get, Iterator) and write (i.e, Put, Merge) or delete to the same key. Every read or write/delete operation will acquire lock (`GetLocksForKeyRange`) on the target key to gain exclusive access to it. This does not align with RocksDB's nature of allowing multi-thread read and write/delete to the same key, that is concurrent threads can issue read/write/delete to RocksDB without external locking. Therefore this is a gap in our testing coverage.
To close the gap, biggest challenge remains in verifying db value against expected state in presence of parallel read and write/delete. The challenge is due to read/write/delete to the db and read/write to expected state is not within one atomic operation. Therefore we may not know the exact expected state of a certain db read, as by the time we read the expected state for that db read, another write to expected state for another db write to the same key might have changed the expected state.
**Summary:**
Credited to ajkr's idea, we now solve this challenge by breaking the 32-bits expected value of a key into different parts that can be read and write to in parallel.
Basically we divide the 32-bits expected value into `value_base` (corresponding to the previous whole 32 bits but now with some shrinking in the value base range we allow), `pending_write` (i.e, whether there is an ongoing concurrent write), `del_counter` (i.e, number of times a value has been deleted, analogous to value_base for write), `pending_delete` (similar to pending_write) and `deleted` (i.e whether a key is deleted).
Also, we need to use incremental `value_base` instead of random value base as before because we want to control the range of value base a correct db read result can possibly be in presence of parallel read and write. In that way, we can verify the correctness of the read against expected state more easily. This is at the cost of reducing the randomness of the value generated in NonBatchedOpsStressTest we are willing to accept.
(For detailed algorithm of how to use these parts to infer expected state of a key, see the PR)
Misc: hide value_base detail from callers of ExpectedState by abstracting related logics into ExpectedValue class
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11058
Test Plan:
- Manual test of small number of keys (i.e, high chances of parallel read and write/delete to same key) with equally distributed read/write/deleted for 30 min
```
python3 tools/db_crashtest.py --simple {blackbox|whitebox} --sync_fault_injection=1 --skip_verifydb=0 --continuous_verification_interval=1000 --clear_column_family_one_in=0 --max_key=10 --column_families=1 --threads=32 --readpercent=25 --writepercent=25 --nooverwritepercent=0 --iterpercent=25 --verify_iterator_with_expected_state_one_in=1 --num_iterations=5 --delpercent=15 --delrangepercent=10 --range_deletion_width=5 --use_merge={0|1} --use_put_entity_one_in=0 --use_txn=0 --verify_before_write=0 --user_timestamp_size=0 --compact_files_one_in=1000 --compact_range_one_in=1000 --flush_one_in=1000 --get_property_one_in=1000 --ingest_external_file_one_in=100 --backup_one_in=100 --checkpoint_one_in=100 --approximate_size_one_in=0 --acquire_snapshot_one_in=100 --use_multiget=0 --prefixpercent=0 --get_live_files_one_in=1000 --manual_wal_flush_one_in=1000 --pause_background_one_in=1000 --target_file_size_base=524288 --write_buffer_size=524288 --verify_checksum_one_in=1000 --verify_db_one_in=1000
```
- Rehearsal stress test for normal parameter and aggressive parameter to see if such change can find what existing stress test can find (i.e, no regression in testing capability)
- [Ongoing]Try to find new bugs with this change that are not found by current NonBatchedOpsStressTest with no parallel read and write/delete to same key
Reviewed By: ajkr
Differential Revision: D42257258
Pulled By: hx235
fbshipit-source-id: e6fdc18f1fad3753e5ac91731483a644d9b5b6eb
Summary:
When the DB is opened, RocksDB creates a temp OPTIONS file, writes the current options to it, and renames it. In case of a failure, the temp file is left behind, and is not deleted by PurgeObsoleteFiles(). Fix this by explicitly deleting the temp file if writing to it or renaming it fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11423
Test Plan: Add a unit test
Reviewed By: akankshamahajan15
Differential Revision: D45540454
Pulled By: anand1976
fbshipit-source-id: 47facdc30d8cc5667036312d04b21d3fc253c92e
Summary:
Added a ticker stat, `BLOCK_CHECKSUM_MISMATCH_COUNT`, to count how many block checksum verifications detected a mismatch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11438
Test Plan: new unit test
Reviewed By: pdillinger
Differential Revision: D45788179
Pulled By: ajkr
fbshipit-source-id: e2b44eba7c23b3e110ebe69eaa78a710dec2590f
Summary:
This patch adds support to write and read a user-defined timestamp size record in log writer and log reader. It will be used by WAL logs to persist the user-defined timestamp format for subsequent WriteBatch records. Reading and writing UDT sizes for WAL logs are not included in this patch. It will be in a follow up.
The syntax for the record is: at write time, one such record is added when log writer encountered any non-zero UDT size it hasn't recorded so far. At read time, all such records read up to a point are accumulated and applicable to all subsequent WriteBatch records.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11433
Test Plan:
```
make clean && make -j32 all
./log_test --gtest_filter="*WithTimestampSize*"
```
Reviewed By: ltamasi
Differential Revision: D45678708
Pulled By: jowlyzhang
fbshipit-source-id: b770c8f45bb7b9383b14aac9f22af781304fb41d
Summary:
- Add a new option `CompactionOptionsFIFO::file_temperature_age_thresholds` that allows user to specify age thresholds for compacting files to different temperatures. File temperature can be used to store files in different storage media. The new options allows specifying multiple temperature-age pairs. The option uses struct for a temperature-age pair to use the existing parsing functionality to make the option dynamically settable.
- Deprecate the old option `age_for_warm` that was added for a similar purpose.
- Compaction score calculation logic is updated to check if a file needs to be compacted to change its temperature.
- Some refactoring is done in `FIFOCompactionPicker::PickTemperatureChangeCompaction`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11428
Test Plan: adapted unit tests that were for `age_for_warm` to this new option.
Reviewed By: ajkr
Differential Revision: D45611412
Pulled By: cbi42
fbshipit-source-id: 2dc384841f61cc04abb9681e31aa2de0f0b06106
Summary:
Context:
This pull request update is in response to a comment made on https://github.com/facebook/rocksdb/pull/8596#discussion_r680264932. The current implementation of RefillBytesAndGrantRequestsLocked() drains all available_bytes, but the first request after the last wave of requesting/bytes granting is done is not being handled in the same way.
This creates a scenario where if a request for a large amount of bytes is enqueued first, but there are not enough available_bytes to fulfill it, the request is put to sleep until the next refill time. Meanwhile, a later request for a smaller number of bytes comes in and is granted immediately. This behavior is not fair as the earlier request was made first.
To address this issue, we have made changes to the code to exhaust the remaining available bytes from the request and queue the remaining. With this change, requests are granted in the order they are received, ensuring that earlier requests are not unfairly delayed by later, smaller requests. The specific scenario described above will no longer occur with this change. Also consolidated `granted` and `request_bytes` as part of the change since `granted` is equivalent to `request_bytes == 0`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11425
Test Plan: Added `AvailableByteSizeExhaustTest`
Reviewed By: hx235
Differential Revision: D45570711
Pulled By: jaykorean
fbshipit-source-id: a7117ed17bf4b8a7ae0f76124cb41902db1a2592
Summary:
**Background** - runtime detection of certain x86 CPU features was added for optimizing CRC32c checksums, where performance is dramatically affected by the availability of certain CPU instructions and code using intrinsics for those instructions. And Java builds with native library try to be broadly compatible but performant.
What has changed is that CRC32c is no longer the most efficient cheecksum on contemporary x86_64 hardware, nor the default checksum. XXH3 is generally faster and not as dramatically impacted by the availability of certain CPU instructions. For example, on my Skylake system using db_bench (similar on an older Skylake system without AVX512):
PORTABLE=1 empty USE_SSE : xxh3->8 GB/s crc32c->0.8 GB/s (no SSE4.2 nor AVX2 instructions)
PORTABLE=1 USE_SSE=1 : xxh3->19 GB/s crc32c->16 GB/s (with SSE4.2 and AVX2)
PORTABLE=0 USE_SSE ignored: xxh3->28 GB/s crc32c->16 GB/s (also some AVX512)
Testing a ~10 year old system, with SSE4.2 but without AVX2, crc32c is a similar speed to the new systems but xxh3 is only about half that speed, also 8GB/s like the non-AVX2 compile above. Given that xxh3 has specific optimization for AVX2, I think we can infer that that crc32c is only fastest for that ~2008-2013 period when SSE4.2 was included but not AVX2. And given that xxh3 is only about 2x slower on these systems (not like >10x slower for unoptimized crc32c), I don't think we need to invest too much in optimally adapting to these old cases.
x86 hardware that doesn't support fast CRC32c is now extremely rare, so requiring a custom build to support such hardware is fine IMHO.
**This change** does two related things:
* Remove runtime CPU detection for optimizing CRC32c on x86. Maintaining this code is non-zero work, and compiling special code that doesn't work on the configured target instruction set for code generation is always dubious. (On the one hand we have to ensure the CRC32c code uses SSE4.2 but on the other hand we have to ensure nothing else does.)
* Detect CPU features in source code, not in build scripts. Although there are some hypothetical advantages to detectiong in build scripts (compiler generality), RocksDB supports at least three build systems: make, cmake, and buck. It's not practical to support feature detection on all three, and we have suffered from missed optimization opportunities by relying on missing or incomplete detection in cmake and buck. We also depend on some components like xxhash that do source code detection anyway.
**In more detail:**
* `HAVE_SSE42`, `HAVE_AVX2`, and `HAVE_PCLMUL` replaced by standard macros `__SSE4_2__`, `__AVX2__`, and `__PCLMUL__`.
* MSVC does not provide high fidelity defines for SSE, PCLMUL, or POPCNT, but we can infer those from `__AVX__` or `__AVX2__` in a compatibility header. In rare cases of false negative or false positive feature detection, a build engineer should be able to set defines to work around the issue.
* `__POPCNT__` is another standard define, but we happen to only need it on MSVC, where it is set by that compatibility header, or can be set by the build engineer.
* `PORTABLE` can be set to a CPU type, e.g. "haswell", to compile for that CPU type.
* `USE_SSE` is deprecated, now equivalent to PORTABLE=haswell, which roughly approximates its old behavior.
Notably, this change should enable more builds to use the AVX2-optimized Bloom filter implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11419
Test Plan:
existing tests, CI
Manual performance tests after the change match the before above (none expected with make build).
We also see AVX2 optimized Bloom filter code enabled when expected, by injecting a compiler error. (Performance difference is not big on my current CPU.)
Reviewed By: ajkr
Differential Revision: D45489041
Pulled By: pdillinger
fbshipit-source-id: 60ceb0dd2aa3b365c99ed08a8b2a087a9abb6a70
Summary:
See motivation and description in new ShardedCacheOptions::hash_seed option.
Updated db_bench so that its seed param is used for the cache hash seed.
Made its code more safe to ensure seed is set before use.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11391
Test Plan:
unit tests added / updated
**Performance** - no discernible difference seen running cache_bench repeatedly before & after. With lru_cache and hyper_clock_cache.
Reviewed By: hx235
Differential Revision: D45557797
Pulled By: pdillinger
fbshipit-source-id: 40bf4da6d66f9d41a8a0eb8e5cf4246a4aa07934
Summary:
Fix build error: variable 'base_level' may be uninitialized
```
db_impl_compaction_flush.cc:1195:21: error: variable 'base_level' may be uninitialized when used here [-Werror,-Wconditional-uninitialized]
level = base_level;
```
^~~~~~~~~~
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11435
Test Plan: CircleCI jobs
Reviewed By: cbi42
Differential Revision: D45708176
Pulled By: akankshamahajan15
fbshipit-source-id: 851b1205b22b63d728495e5735fa91b0ad8e012b
Summary:
**Context:**
We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g, small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug. Therefore we decide to record the exact tail size and use it directly to prefetch tail of the SST instead of relying heuristics.
**Summary:**
- Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()`
- For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more.
- Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406
Test Plan:
1. New UT
2. db bench
Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison.
```
diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc
index bd5669f0f..791484c1f 100644
--- a/table/block_based/block_based_table_reader.cc
+++ b/table/block_based/block_based_table_reader.cc
@@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail(
&tail_prefetch_size);
// Try file system prefetch
- if (!file->use_direct_io() && !force_direct_prefetch) {
+ if (false && !file->use_direct_io() && !force_direct_prefetch) {
if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority)
.IsNotSupported()) {
prefetch_buffer->reset(new FilePrefetchBuffer(
diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc
index ea40f5fa0..39a0ac385 100644
--- a/tools/db_bench_tool.cc
+++ b/tools/db_bench_tool.cc
@@ -4191,6 +4191,8 @@ class Benchmark {
std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options));
} else {
BlockBasedTableOptions block_based_options;
+ block_based_options.metadata_cache_options.partition_pinning =
+ PinningTier::kAll;
block_based_options.checksum =
static_cast<ChecksumType>(FLAGS_checksum_type);
if (FLAGS_use_hash_search) {
```
Create DB
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
ReadRandom
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
(a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 3395
rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614
```
(b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 14257
rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540
```
As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR
3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR.
Reviewed By: pdillinger
Differential Revision: D45413346
Pulled By: hx235
fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064
Summary:
Roughly group ReadOptions into those that apply generally and those that only apply to range scans. Also use field assignment idiom to simplify specification of default values.
Also some rearranging to reduce unused padding. sizeof(ReadOptions) was 144 on my system, now 136.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11430
Test Plan: existing tests, no functional change intended
Reviewed By: hx235
Differential Revision: D45626508
Pulled By: pdillinger
fbshipit-source-id: 227d4158c5123405324f273ded2eb9d8bce86364
Summary:
This PR adds a plugin that supports AES-CTR encryption for RocksDB based on highly performant intel open-source cryptographic library IPP-Crypto.
Details:
- supports AES-128, AES-192, and AES-256.
- uses the CTR mode of operation.
- based on the Intel® crypto library -- https://github.com/intel/ipp-crypto.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11429
Reviewed By: cbi42
Differential Revision: D45622342
Pulled By: ajkr
fbshipit-source-id: 2463fa2b8ae625fdd7d83768e274c74e3f2a0f46
Summary:
Document ReadOptions::io_activity as internal-use-only. And to keep kUnknown as last (and why).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11427
Test Plan: comments only
Reviewed By: hx235
Differential Revision: D45576986
Pulled By: pdillinger
fbshipit-source-id: aae15aa22ea91370c2b7366154e45d4b91a79ad2
Summary:
when I use g++-13 to exec the `make all` command, the output throws the warnings.
```
db/compaction/compaction_job_test.cc: In member function ‘void rocksdb::CompactionJobTestBase::AddMockFile(const rocksdb::mock::KVVector&, int)’:
db/compaction/compaction_job_test.cc:376:57: error: redundant move in initialization [-Werror=redundant-move]
376 | env_, GenerateFileName(file_number), std::move(contents)));
| ~~~~~~~~~^~~~~~~~~~
db/compaction/compaction_job_test.cc:375:7: note: in expansion of macro ‘EXPECT_OK’
375 | EXPECT_OK(mock_table_factory_->CreateMockTable(
| ^~~~~~~~~
db/compaction/compaction_job_test.cc:376:57: note: remove ‘std::move’ call
376 | env_, GenerateFileName(file_number), std::move(contents)));
| ~~~~~~~~~^~~~~~~~~~
db/compaction/compaction_job_test.cc:375:7: note: in expansion of macro ‘EXPECT_OK’
375 | EXPECT_OK(mock_table_factory_->CreateMockTable(
| ^~~~~~~~~
cc1plus: all warnings being treated as errors
make: *** [Makefile:2507: db/compaction/compaction_job_test.o] Error 1
```
and I also add some `(void)unused_variable` statements because of the cmake argument `-Wunused-but-set-variable -Wunused-but-set-variable`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11418
Reviewed By: akankshamahajan15
Differential Revision: D45528223
Pulled By: ajkr
fbshipit-source-id: fee1a77c30039a56b481de953f0a834cc788abbc
Summary:
When a DB is opened, RocksDB creates an empty WAL file. When the DB is reopened and the WAL is empty, the min log number to keep is not advanced until a memtable flush happens. If a process crashes soon after reopening the DB, its likely that no memtable flush would have happened, which means the empty WAL file is not deleted. In a crash loop scenario, this leads to empty WAL files accumulating. Fix this by ensuring the min log number is advanced if the WAL is empty.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11409
Test Plan: Add a unit test
Reviewed By: ajkr
Differential Revision: D45281685
Pulled By: anand1976
fbshipit-source-id: 0225877c613e65ffb30972a0051db2830105423e
Summary:
For better clarity, encouraging more options explicitly specified using fields rather than positionally via constructor parameter lists. Simplifies code maintenance as new fields are added. Deprecate some cases of the confusing pattern of NewWhatever() functions returning shared_ptr.
Net reduction of about 70 source code lines (including comments).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11386
Test Plan: existing tests
Reviewed By: ajkr
Differential Revision: D45059075
Pulled By: pdillinger
fbshipit-source-id: d53fa09b268024f9c55254bb973b6c69feebf41a
Summary:
lldb is more supported for Meta infrastructure than gdb, so adding support for it in generating stack traces and attaching debugger on crash. For now you need to set ROCKSDB_LLDB_STACK=1 for stack traces or ROCKSDB_DEBUG=lldb for interactive debugging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11413
Test Plan: some manual testing (no production code changes)
Reviewed By: ajkr
Differential Revision: D45360952
Pulled By: pdillinger
fbshipit-source-id: 862bc8800eb03e3bdc1be8c0702960a19db45be8
Summary:
Seen in Meta-internal builds that manually depend on rocksdb_whole_archive_lib and want to automatically depend on rocksdb_lib. This change puts rocksdb_lib in the ancestry of rocksdb_whole_archive_lib, and buck2 appears to recognize that even if rocksdb_lib is listed as a separate dependency downstream.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11421
Test Plan: Run failing internal build with the change. See T147085939
Reviewed By: akankshamahajan15
Differential Revision: D45446689
Pulled By: pdillinger
fbshipit-source-id: e8a891fa020dfcf0564b35d30511d70347650fa8
Summary:
The old `StackableDB` based BlobDB implementation relies on a DB listener to track the total size of the SST files in the database and to trigger FIFO eviction. Some test cases in `BlobDBTest` assume that the listener is notified by the time `DB::Flush` returns, which is not guaranteed (side note: `TEST_WaitForFlushMemTable` would not guarantee this either). The patch fixes these tests by using `SyncPoint`s to make sure the listener is actually called before verifying the FIFO behavior.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11417
Test Plan:
```
make -j56 COERCE_CONTEXT_SWITCH=1 blob_db_test
./blob_db_test --gtest_filter=BlobDBTest.FIFOEviction_TriggerOnSSTSizeChange
./blob_db_test --gtest_filter=BlobDBTest.FilterForFIFOEviction
./blob_db_test --gtest_filter=BlobDBTest.FIFOEviction_NoEnoughBlobFilesToEvict
```
Reviewed By: ajkr
Differential Revision: D45407135
Pulled By: ltamasi
fbshipit-source-id: fcd63d76937d2c975f569a6635ce8730772a3d75
Summary:
add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are
1. checksum construction and verification in block.cc/h
2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h)
3. unit tests/crash test updates
Tests:
* Added unit tests
* Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576`
Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled.
Performance:
Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory.
For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates):
```
SETUP
make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench
./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none
BENCHMARK
./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE
The readrandom ops/sec looks like the following:
Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB
Main 240805 223604 198176 161653 139040
PR prot_bytes=0 238691 226693 200127 161082 141153
PR prot_bytes=1 214983 193199 178532 137013 108211
prot_bytes=1 vs -10% -15% -10.8% -15% -23%
prot_bytes=0
```
The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287
Reviewed By: ajkr
Differential Revision: D43970708
Pulled By: cbi42
fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940
> NOTE: Entries for next release do not go here. Follow instructions in `unreleased_history/README.txt`
## 8.7.3 (10/30/2023)
### Behavior Changes
* Deleting stale files upon recovery are delegated to SstFileManger if available so they can be rate limited.
## 8.7.2 (10/25/2023)
### Public API Changes
* Add new Cache APIs GetSecondaryCacheCapacity() and GetSecondaryCachePinnedUsage() to return the configured capacity, and cache reservation charged to the secondary cache.
### Bug Fixes
* Fixed a possible underflow when computing the compressed secondary cache share of memory reservations while updating the compressed secondary to total block cache ratio.
* Fix an assertion failure when UpdeteTieredCache() is called in an idempotent manner.
## 8.7.1 (10/20/2023)
### Bug Fixes
* Fix a bug in auto_readahead_size where first_internal_key of index blocks wasn't copied properly resulting in corruption error when first_internal_key was used for comparison.
* Add bounds check in WBWIIteratorImpl and make BaseDeltaIterator, WriteUnpreparedTxn and WritePreparedTxn respect the upper bound and lower bound in ReadOption. See 11680.
## 8.7.0 (09/22/2023)
### New Features
* Added an experimental new "automatic" variant of HyperClockCache that does not require a prior estimate of the average size of cache entries. This variant is activated when HyperClockCacheOptions::estimated\_entry\_charge = 0 and has essentially the same concurrency benefits as the existing HyperClockCache.
* Add a new statistic `COMPACTION_CPU_TOTAL_TIME` that records cumulative compaction cpu time. This ticker is updated regularly while a compaction is running.
* Add `GetEntity()` API for ReadOnly DB and Secondary DB.
* Add a new iterator API `Iterator::Refresh(const Snapshot *)` that allows iterator to be refreshed while using the input snapshot to read.
* Added a new read option `merge_operand_count_threshold`. When the number of merge operands applied during a successful point lookup exceeds this threshold, the query will return a special OK status with a new subcode `kMergeOperandThresholdExceeded`. Applications might use this signal to take action to reduce the number of merge operands for the affected key(s), for example by running a compaction.
* For `NewRibbonFilterPolicy()`, made the `bloom_before_level` option mutable through the Configurable interface and the SetOptions API, allowing dynamic switching between all-Bloom and all-Ribbon configurations, and configurations in between. See comments on `NewRibbonFilterPolicy()`
* RocksDB now allows the block cache to be stacked on top of a compressed secondary cache and a non-volatile secondary cache, thus creating a three-tier cache. To set it up, use the `NewTieredCache()` API in rocksdb/cache.h..
* Added a new wide-column aware full merge API called `FullMergeV3` to `MergeOperator`. `FullMergeV3` supports wide columns both as base value and merge result, which enables the application to perform more general transformations during merges. For backward compatibility, the default implementation implements the earlier logic of applying the merge operation to the default column of any wide-column entities. Specifically, if there is no base value or the base value is a plain key-value, the default implementation falls back to `FullMergeV2`. If the base value is a wide-column entity, the default implementation invokes `FullMergeV2` to perform the merge on the default column, and leaves any other columns unchanged.
* Add wide column support to ldb commands (scan, dump, idump, dump_wal) and sst_dump tool's scan command
### Public API Changes
* Expose more information about input files used in table creation (if any) in `CompactionFilter::Context`. See `CompactionFilter::Context::input_start_level`,`CompactionFilter::Context::input_table_properties` for more.
* `Options::compaction_readahead_size` 's default value is changed from 0 to 2MB.
* When using LZ4 compression, the `acceleration` parameter is configurable by setting the negated value in `CompressionOptions::level`. For example, `CompressionOptions::level=-10` will set `acceleration=10`
* The `NewTieredCache` API has been changed to take the total cache capacity (inclusive of both the primary and the compressed secondary cache) and the ratio of total capacity to allocate to the compressed cache. These are specified in `TieredCacheOptions`. Any capacity specified in `LRUCacheOptions`, `HyperClockCacheOptions` and `CompressedSecondaryCacheOptions` is ignored. A new API, `UpdateTieredCache` is provided to dynamically update the total capacity, ratio of compressed cache, and admission policy.
* The `NewTieredVolatileCache()` API in rocksdb/cache.h has been renamed to `NewTieredCache()`.
### Behavior Changes
* Compaction read performance will regress when `Options::compaction_readahead_size` is explicitly set to 0
* Universal size amp compaction will conditionally exclude some of the newest L0 files when selecting input with a small negative impact to size amp. This is to prevent a large number of L0 files from being locked by a size amp compaction, potentially leading to write stop with a few more flushes.
* Change ldb scan command delimiter from ':' to '==>'.
* For non direct IO, eliminate the file system prefetching attempt for compaction read when `Options::compaction_readahead_size` is 0
### Bug Fixes
* Fix a bug where if there is an error reading from offset 0 of a file from L1+ and that the file is not the first file in the sorted run, data can be lost in compaction and read/scan can return incorrect results.
* Fix a bug where iterator may return incorrect result for DeleteRange() users if there was an error reading from a file.
* Fix a bug with atomic_flush=true that can cause DB to stuck after a flush fails (#11872).
* Fix a bug where RocksDB (with atomic_flush=false) can delete output SST files of pending flushes when a previous concurrent flush fails (#11865). This can result in DB entering read-only state with error message like `IO error: No such file or directory: While open a file for random read: /tmp/rocksdbtest-501/db_flush_test_87732_4230653031040984171/000013.sst`.
* Fix an assertion fault during seek with async_io when readahead trimming is enabled.
* When the compressed secondary cache capacity is reduced to 0, it should be completely disabled. Before this fix, inserts and lookups would still go to the backing `LRUCache` before returning, thus incurring locking overhead. With this fix, inserts and lookups are no-ops and do not add any overhead.
* Updating the tiered cache (cache allocated using NewTieredCache()) by calling SetCapacity() on it was not working properly. The initial creation would set the primary cache capacity to the combined primary and compressed secondary cache capacity. But SetCapacity() would just set the primary cache capacity. With this fix, the user always specifies the total budget and compressed secondary cache ratio on creation. Subsequently, SetCapacity() will distribute the new capacity across the two caches by the same ratio.
* Fixed a bug in `MultiGet` for cleaning up SuperVersion acquired with locking db mutex.
* Fix a bug where row cache can falsely return kNotFound even though row cache entry is hit.
* Fixed a race condition in `GenericRateLimiter` that could cause it to stop granting requests
* Fix a bug (Issue #10257) where DB can hang after write stall since no compaction is scheduled (#11764).
* Add a fix for async_io where during seek, when reading a block for seeking a target key in a file without any readahead, the iterator aligned the read on a page boundary and reading more than necessary. This increased the storage read bandwidth usage.
* Fix an issue in sst dump tool to handle bounds specified for data with user-defined timestamps.
* When auto_readahead_size is enabled, update readahead upper bound during readahead trimming when reseek changes iterate_upper_bound dynamically.
* Fixed a bug where `rocksdb.file.read.verify.file.checksums.micros` is not populated
* Fixed a bug where compaction read under non direct IO still falls back to RocksDB internal prefetching after file system's prefetching returns non-OK status other than `Status::NotSupported()`
### Performance Improvements
* Added additional improvements in tuning readahead_size during Scans when auto_readahead_size is enabled. However it's not recommended for backward scans and might impact the performance. More details in options.h.
* During async_io, the Seek happens in 2 phases. Phase 1 starts an asynchronous read on a block cache miss, and phase 2 waits for it to complete and finishes the seek. In both phases, it tries to lookup the block cache for the data block first before looking in the prefetch buffer. It's optimized by doing the block cache lookup only in the first phase that would save some CPU.
## 8.6.0 (08/18/2023)
### New Features
* Added enhanced data integrity checking on SST files with new format_version=6. Performance impact is very small or negligible. Previously if SST data was misplaced or re-arranged by the storage layer, it could pass block checksum with higher than 1 in 4 billion probability. With format_version=6, block checksums depend on what file they are in and location within the file. This way, misplaced SST data is no more likely to pass checksum verification than randomly corrupted data. Also in format_version=6, SST footers are checksum-protected.
* Add a new feature to trim readahead_size during scans upto upper_bound when iterate_upper_bound is specified. It's enabled through ReadOptions.auto_readahead_size. Users must also specify ReadOptions.iterate_upper_bound.
* RocksDB will compare the number of input keys to the number of keys processed after each compaction. Compaction will fail and report Corruption status if the verification fails. Option `compaction_verify_record_count` is introduced for this purpose and is enabled by default.
* Add a CF option `bottommost_file_compaction_delay` to allow specifying the delay of bottommost level single-file compactions.
* Add support to allow enabling / disabling user-defined timestamps feature for an existing column family in combination with the in-Memtable only feature.
* Implement a new admission policy for the compressed secondary cache that admits blocks evicted from the primary cache with the hit bit set. This policy can be specified in TieredVolatileCacheOptions by setting the newly added adm_policy option.
* Add a column family option `memtable_max_range_deletions` that limits the number of range deletions in a memtable. RocksDB will try to do an automatic flush after the limit is reached. (#11358)
* Add PutEntity API in sst_file_writer
* Add `timeout` in microsecond option to `WaitForCompactOptions` to allow timely termination of prolonged waiting in scenarios like recurring recoverable errors, such as out-of-space situations and continuous write streams that sustain ongoing flush and compactions
* New statistics `rocksdb.file.read.{get|multiget|db.iterator|verify.checksum|verify.file.checksums}.micros` measure read time of block-based SST tables or blob files during db open, `Get()`, `MultiGet()`, using db iterator, `VerifyFileChecksums()` and `VerifyChecksum()`. They require stats level greater than `StatsLevel::kExceptDetailedTimers`.
* Add close_db option to `WaitForCompactOptions` to call Close() after waiting is done.
* Add a new compression option `CompressionOptions::checksum` for enabling ZSTD's checksum feature to detect corruption during decompression.
### Public API Changes
* Mark `Options::access_hint_on_compaction_start` related APIs as deprecated. See #11631 for alternative behavior.
### Behavior Changes
* Statistics `rocksdb.sst.read.micros` now includes time spent on multi read and async read into the file
* For Universal Compaction users, periodic compaction (option `periodic_compaction_seconds`) will be set to 30 days by default if block based table is used.
### Bug Fixes
* Fix a bug in FileTTLBooster that can cause users with a large number of levels (more than 65) to see errors like "runtime error: shift exponent .. is too large.." (#11673).
## 8.5.0 (07/21/2023)
### Public API Changes
* Removed recently added APIs `GeneralCache` and `MakeSharedGeneralCache()` as our plan changed to stop exposing a general-purpose cache interface. The old forms of these APIs, `Cache` and `NewLRUCache()`, are still available, although general-purpose caching support will be dropped eventually.
### Behavior Changes
* Option `periodic_compaction_seconds` no longer supports FIFO compaction: setting it has no effect on FIFO compactions. FIFO compaction users should only set option `ttl` instead.
* Move prefetching responsibility to page cache for compaction read for non directIO use case
### Performance Improvements
* In case of direct_io, if buffer passed by callee is already aligned, RandomAccessFileRead::Read will avoid realloacting a new buffer, reducing memcpy and use already passed aligned buffer.
* Small efficiency improvement to HyperClockCache by reducing chance of compiler-generated heap allocations
### Bug Fixes
* Fix use_after_free bug in async_io MultiReads when underlying FS enabled kFSBuffer. kFSBuffer is when underlying FS pass their own buffer instead of using RocksDB scratch in FSReadRequest. Right now it's an experimental feature.
## 8.4.0 (06/26/2023)
### New Features
* Add FSReadRequest::fs_scratch which is a data buffer allocated and provided by underlying FileSystem to RocksDB during reads, when FS wants to provide its own buffer with data instead of using RocksDB provided FSReadRequest::scratch. This can help in cpu optimization by avoiding copy from file system's buffer to RocksDB buffer. More details on how to use/enable it in file_system.h. Right now its supported only for MultiReads(async + sync) with non direct io.
* Start logging non-zero user-defined timestamp sizes in WAL to signal user key format in subsequent records and use it during recovery. This change will break recovery from WAL files written by early versions that contain user-defined timestamps. The workaround is to ensure there are no WAL files to recover (i.e. by flushing before close) before upgrade.
* Added new property "rocksdb.obsolete-sst-files-size-property" that reports the size of SST files that have become obsolete but have not yet been deleted or scheduled for deletion
* Start to record the value of the flag `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` in the Manifest and table properties for a SST file when it is created. And use the recorded flag when creating a table reader for the SST file. This flag is only explicitly record if it's false.
* Add a new option OptimisticTransactionDBOptions::shared_lock_buckets that enables sharing mutexes for validating transactions between DB instances, for better balancing memory efficiency and validation contention across DB instances. Different column families and DBs also now use different hash seeds in this validation, so that the same set of key names will not contend across DBs or column families.
* Add a new ticker `rocksdb.files.marked.trash.deleted` to track the number of trash files deleted by background thread from the trash queue.
* Add an API NewTieredVolatileCache() in include/rocksdb/cache.h to allocate an instance of a block cache with a primary block cache tier and a compressed secondary cache tier. A cache of this type distributes memory reservations against the block cache, such as WriteBufferManager, table reader memory etc., proportionally across both the primary and compressed secondary cache.
* Add `WaitForCompact()` to wait for all flush and compactions jobs to finish. Jobs to wait include the unscheduled (queued, but not scheduled yet).
* Add `WriteBatch::Release()` that releases the batch's serialized data to the caller.
### Public API Changes
* Add C API `rocksdb_options_add_compact_on_deletion_collector_factory_del_ratio`.
* change the FileSystem::use_async_io() API to SupportedOps API in order to extend it to various operations supported by underlying FileSystem. Right now it contains FSSupportedOps::kAsyncIO and FSSupportedOps::kFSBuffer. More details about FSSupportedOps in filesystem.h
* Add new tickers: `rocksdb.error.handler.bg.error.count`, `rocksdb.error.handler.bg.io.error.count`, `rocksdb.error.handler.bg.retryable.io.error.count` to replace the misspelled ones: `rocksdb.error.handler.bg.errro.count`, `rocksdb.error.handler.bg.io.errro.count`, `rocksdb.error.handler.bg.retryable.io.errro.count` ('error' instead of 'errro'). Users should switch to use the new tickers before 9.0 release as the misspelled old tickers will be completely removed then.
* Overload the API CreateColumnFamilyWithImport() to support creating ColumnFamily by importing multiple ColumnFamilies It requires that CFs should not overlap in user key range.
### Behavior Changes
* Change the default value for option `level_compaction_dynamic_level_bytes` to true. This affects users who use leveled compaction and do not set this option explicitly. These users may see additional background compactions following DB open. These compactions help to shape the LSM according to `level_compaction_dynamic_level_bytes` such that the size of each level Ln is approximately size of Ln-1 * `max_bytes_for_level_multiplier`. Turning on this option has other benefits too: see more detail in wiki: https://github.com/facebook/rocksdb/wiki/Leveled-Compaction#option-level_compaction_dynamic_level_bytes-and-levels-target-size and in option comment in advanced_options.h (#11525).
* For Leveled Compaction users, `CompactRange()` will now always try to compact to the last non-empty level. (#11468)
For Leveled Compaction users, `CompactRange()` with `bottommost_level_compaction = BottommostLevelCompaction::kIfHaveCompactionFilter` will behave similar to `kForceOptimized` in that it will skip files created during this manual compaction when compacting files in the bottommost level. (#11468)
* RocksDB will try to drop range tombstones during non-bottommost compaction when it is safe to do so. (#11459)
* When a DB is openend with `allow_ingest_behind=true` (currently only Universal compaction is supported), files in the last level, i.e. the ingested files, will not be included in any compaction. (#11489)
* Statistics `rocksdb.sst.read.micros` scope is expanded to all SST reads except for file ingestion and column family import (some compaction reads were previously excluded).
### Bug Fixes
* Reduced cases of illegally using Env::Default() during static destruction by never destroying the internal PosixEnv itself (except for builds checking for memory leaks). (#11538)
* Fix extra prefetching during seek in async_io when BlockBasedTableOptions.num_file_reads_for_auto_readahead is 1 leading to extra reads than required.
* Fix a bug where compactions that are qualified to be run as 2 subcompactions were only run as one subcompaction.
* Fix a use-after-move bug in block.cc.
## 8.3.0 (05/19/2023)
### New Features
* Introduced a new option `block_protection_bytes_per_key`, which can be used to enable per key-value integrity protection for in-memory blocks in block cache (#11287).
* Added `JemallocAllocatorOptions::num_arenas`. Setting `num_arenas > 1` may mitigate mutex contention in the allocator, particularly in scenarios where block allocations commonly bypass jemalloc tcache.
* Improve the operational safety of publishing a DB or SST files to many hosts by using different block cache hash seeds on different hosts. The exact behavior is controlled by new option `ShardedCacheOptions::hash_seed`, which also documents the solved problem in more detail.
* Introduced a new option `CompactionOptionsFIFO::file_temperature_age_thresholds` that allows FIFO compaction to compact files to different temperatures based on key age (#11428).
* Added a new ticker stat to count how many times RocksDB detected a corruption while verifying a block checksum: `BLOCK_CHECKSUM_MISMATCH_COUNT`.
* New statistics `rocksdb.file.read.db.open.micros` that measures read time of block-based SST tables or blob files during db open.
* New statistics tickers for various iterator seek behaviors and relevant filtering, as \*`_LEVEL_SEEK_`\*. (#11460)
### Public API Changes
* EXPERIMENTAL: Add new API `DB::ClipColumnFamily` to clip the key in CF to a certain range. It will physically deletes all keys outside the range including tombstones.
* Add `MakeSharedCache()` construction functions to various cache Options objects, and deprecated the `NewWhateverCache()` functions with long parameter lists.
* Changed the meaning of various Bloom filter stats (prefix vs. whole key), with iterator-related filtering only being tracked in the new \*`_LEVEL_SEEK_`\*. stats. (#11460)
### Behavior changes
* For x86, CPU features are no longer detected at runtime nor in build scripts, but in source code using common preprocessor defines. This will likely unlock some small performance improvements on some newer hardware, but could hurt performance of the kCRC32c checksum, which is no longer the default, on some "portable" builds. See PR #11419 for details.
### Bug Fixes
* Delete an empty WAL file on DB open if the log number is less than the min log number to keep
* Delete temp OPTIONS file on DB open if there is a failure to write it out or rename it
### Performance Improvements
* Improved the I/O efficiency of prefetching SST metadata by recording more information in the DB manifest. Opening files written with previous versions will still rely on heuristics for how much to prefetch (#11406).
## 8.2.0 (04/24/2023)
### Public API Changes
* `SstFileWriter::DeleteRange()` now returns `Status::InvalidArgument` if the range's end key comes before its start key according to the user comparator. Previously the behavior was undefined.
* Add `multi_get_for_update` to C API.
@@ -14,6 +177,7 @@
### Bug Fixes
* In the DB::VerifyFileChecksums API, ensure that file system reads of SST files are equal to the readahead_size in ReadOptions, if specified. Previously, each read was 2x the readahead_size.
* In block cache tracing, fixed some cases of bad hit/miss information (and more) with MultiGet.
### New Features
* Add experimental `PerfContext` counters `iter_{next|prev|seek}_count` for db iterator, each counting the times of corresponding API being called.
@@ -21,9 +185,6 @@
* Added statistics tickers BYTES_COMPRESSED_FROM, BYTES_COMPRESSED_TO, BYTES_COMPRESSION_BYPASSED, BYTES_COMPRESSION_REJECTED, NUMBER_BLOCK_COMPRESSION_BYPASSED, and NUMBER_BLOCK_COMPRESSION_REJECTED. Disabled/deprecated histograms BYTES_COMPRESSED and BYTES_DECOMPRESSED, and ticker NUMBER_BLOCK_NOT_COMPRESSED. The new tickers offer more inight into compression ratios, rejected vs. disabled compression, etc. (#11388)
* New statistics `rocksdb.file.read.{flush|compaction}.micros` that measure read time of block-based SST tables or blob files during flush or compaction.
### Bug Fixes
* In block cache tracing, fixed some cases of bad hit/miss information (and more) with MultiGet.
## 8.1.0 (03/18/2023)
### Behavior changes
* Compaction output file cutting logic now considers range tombstone start keys. For example, SST partitioner now may receive ParitionRequest for range tombstone start keys.
@@ -5,3 +5,4 @@ This is the list of all known third-party plugins for RocksDB. If something is m
* [ZenFS](https://github.com/westerndigitalcorporation/zenfs): a file system for zoned block devices
* [RADOS](https://github.com/riversand963/rocksdb-rados-env): an Env used for interacting with RADOS. Migrated from RocksDB main repo.
* [PMEM](https://github.com/pmem/pmem-rocksdb-plugin): a collection of plugins to enable Persistent Memory on RocksDB.
* [IPPCP](https://github.com/intel/ippcp-plugin-rocksdb): a plugin to enable encryption on RocksDB based on Intel optimized open source IPP-Crypto library.
[Bilibili](bilibili.com) [uses](https://www.alluxio.io/blog/when-ai-meets-alluxio-at-bilibili-building-an-efficient-ai-platform-for-data-preprocessing-and-model-training/) Alluxio to speed up its ML training workloads, and Alluxio uses RocksDB to store its filesystem metadata, so Bilibili uses RocksDB.
Bilibili's [real-time platform](https://www.alibabacloud.com/blog/architecture-and-practices-of-bilibilis-real-time-platform_596676) uses Flink, and uses RocksDB as Flink's state store.
## TikTok
TikTok, or its parent company ByteDance, uses RocksDB as the storage engine for some storage systems, such as its distributed graph database [ByteGraph](https://vldb.org/pvldb/vol15/p3306-li.pdf).
Also, TikTok uses [Alluxio](alluxio.io) to [speed up Presto queries](https://www.alluxio.io/resources/videos/improving-presto-performance-with-alluxio-at-tiktok/), and Alluxio stores the files' metadata in RocksDB.
## FoundationDB
[FoundationDB](https://www.foundationdb.org/) [uses](https://github.com/apple/foundationdb/blob/377f1f692da6ab2fe5bdac57035651db3e5fb66d/fdbserver/KeyValueStoreRocksDB.actor.cpp) RocksDB to implement a [key-value store interface](https://github.com/apple/foundationdb/blob/377f1f692da6ab2fe5bdac57035651db3e5fb66d/fdbserver/KeyValueStoreRocksDB.actor.cpp#L1127) in its server backend.
## Apple
Apple [uses](https://opensource.apple.com/projects/foundationdb/) FoundationDB, so it also uses RocksDB.
## Snowflake
Snowflake [uses](https://www.snowflake.com/blog/how-foundationdb-powers-snowflake-metadata-forward/) FoundationDB, so it also uses RocksDB.
## Microsoft
The Bing search engine from Microsoft uses RocksDB as the storage engine for its web data platform: https://blogs.bing.com/Engineering-Blog/october-2021/RocksDB-in-Microsoft-Bing
@@ -85,9 +104,18 @@ quasardb uses a heavily tuned RocksDB as its persistence layer.
## TiKV
[TiKV](https://github.com/pingcap/tikv) is a GEO-replicated, high-performance, distributed, transactional key-value database. TiKV is powered by Rust and Raft. TiKV uses RocksDB as its persistence layer.
## TiDB
[TiDB](https://github.com/pingcap/tidb) uses the TiKV distributed key-value database, so it uses RocksDB.
## PingCAP
[PingCAP](https://www.pingcap.com/) is the company behind TiDB, its cloud database service uses RocksDB.
## Apache Spark
[Spark Structured Streaming](https://docs.databricks.com/structured-streaming/rocksdb-state-store.html) uses RocksDB as the local state store.
## Databricks
[Databricks](https://www.databricks.com/) [replaces AWS RDS with TiDB](https://www.pingcap.com/case-study/how-databricks-tackles-the-scalability-limit-with-a-mysql-alternative/) for scalability, so it uses RocksDB.
## Apache Flink
[Apache Flink](https://flink.apache.org/news/2016/03/08/release-1.0.0.html) uses RocksDB to store state locally on a machine.
@@ -133,5 +161,9 @@ LzLabs is using RocksDB as a storage engine in their multi-database distributed
## Solana Labs
[Solana](https://github.com/solana-labs/solana) is a fast, secure, scalable, and decentralized blockchain. It uses RocksDB as the underlying storage for its ledger store.
## Apache Kvrocks
[Apache Kvrocks](https://github.com/apache/kvrocks) is an open-source distributed key-value NoSQL database built on top of RocksDB. It serves as a cost-saving and capacity-increasing alternative drop-in replacement for Redis.
## Others
More databases using RocksDB can be found at [dbdb.io](https://dbdb.io/browse?embeds=rocksdb).
Loaded 100 of 676 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Adam Retter
Yu Zhang
anand76
Peter Dillinger
Andrew Kryczka
rogertyang
akankshamahajan
Changyu Bi
Hui Xiao
Yu Zhang
Levi Tamasi
Peter (Stig) Edwards
chuhao zeng
Jay Huh
Kefu Chai
dengyan
Andrew Kryczka
Niklas Fiekas
leipeng
Sarang Masti
马越
Jonah Gao
Changyu Bi
git-hulk
jsteemann
Richard Barnes
Akanksha Mahajan
Fuat Basik
Alexander Bulimov
Levi Tamasi
Han Zhu
nikoPLP
Peter Dillinger
tabokie
Vardhan
amatveev-cf
ywave
zhangyuxiang.ax
darionyaphet
Rémi Calixte
shuzz
zhutao
huangmengbin
Dan Wang
Muhammad
Chad Austin
weedge
Griffin Smith
Jay Schmidek
Yelso Honnr
Yingchun Lai
JUBIN CHHEDA
Alexandre Lavigne
yaphet
Ignat Loskutov
Soli
Alan Paxton
rogertyang
FishAndBird
Akanksha koul
nccx
clundro