c4fdf09c0 added a test that now fails with valgrind
it fails for two resons:
1) the test samples the used memory and then limits the maxmemory to
that value, but it turns out this is not atomic and on slow machines
the background cron process that clean out old query buffers reduces
the memory so that the setting doesn't cause eviction.
2) the dbsize was tested late, after reading some invalidation messages
by that time more and more keys got evicted, partially draining the
db. this is not the focus of this fix (still a known limitation)
(cherry picked from commit a102b21d17)
The test was trying to wait for the replica to start loading the rdb
from the master before it kills the master, but it was actually waiting
for ROLE to be in "sync" mode, which corresponds to REPL_STATE_TRANSFER
that starts before the actual loading starts.
now instead it waits for the loading flag to be set.
Besides, the test was dependent on the previous configuration of the
servers, relying on the fact the replica is configured to persist
(either RDB of AOF), now it is set explicitly.
(cherry picked from commit 264953871b)
This will allow to use: RedisModule_CreateStringPrintf(ctx, "%s %c %s", "string1", 0, "string2");
On large string, the previous code would incrementally retry to double the output buffer.
now it uses the the return value of snprintf and grows to the right size in one step.
and also avoids an excessive strlen in sdscat at the end.
(cherry picked from commit f4ca3d8757)
The bug occurs when 'callback' re-registers itself to a point
in the future and the execution time in non-negligible:
'now' refers to time BEFORE callback was executed and is used
to calculate 'next_period'.
We must get the actual current time when calculating 'next_period'
(cherry picked from commit 1a91a2700b)
Turns out this was broken since version 4.0 when we added sds size
classes.
The cluster code uses sds for the receive buffer, and then casts it to a
struct and accesses a 64 bit variable.
This commit replaces the use of sds with a simple reallocated buffer.
(cherry picked from commit 380f6048e0)
When client tracking is enabled signalModifiedKey can increase memory usage,
this can cause the loop in performEvictions to keep running since it was measuring
the memory usage impact of signalModifiedKey.
The section that measures the memory impact of the eviction should be just on dbDelete,
excluding keyspace notification, client tracking, and propagation to AOF and replicas.
This resolves part of the problem described in #8069
p.s. fix took 1 minute, test took about 3 hours to write.
(cherry picked from commit c4fdf09c05)
This PR not only fixes the problem that swapdb does not make the
transaction fail, but also optimizes the FLUSHALL and FLUSHDB command to
set the CLIENT_DIRTY_CAS flag to avoid unnecessary traversal of clients.
FLUSHDB was changed to first iterate on all watched keys, and then on the
clients watching each key.
Instead of iterating though all clients, and for each iterate on watched keys.
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit 10f94b0ab1)
Turns out that when the fork child crashes, the crash log was deleting
the pidfile from the disk (although the parent is still running.
Now we set the pidfile of the fork process to NULL so the fork process
will never deletes it.
(cherry picked from commit 92a483bca2)
instead of asking for the extra new space it wanted, it asked to grow the
string by the size it already has too.
i.e. a string of 1000 bytes, needing to grow by 10 bytes, would have been
asking for an **additional** 1010 bytes.
(cherry picked from commit 595ecd5f4b)
This is a recent problem, introduced by 7471743 (redis 6.0)
The implications are:
The sole difference between LookupKeyRead and LookupKeyWrite is for command
executed on a replica, which are not received from its master client. (for the master,
and for the master client on the replica, these two functions behave the same)!
Since SORT is a write command, this bug only implicates a writable-replica.
And these are its implications:
- SORT STORE will behave as it did before the above mentioned commit (like before
redis 6.0). on a writable-replica an already logically expired the key would have
appeared missing. (store dest key would be deleted, instead of being populated
with the data from the already logically expired key)
- SORT (the non store variant, which in theory could have been executed on
read-only-replica if it weren't for the write flag), will (in redis 6.0) have a new bug
and return the data from the already logically expired key instead of empty response.
(cherry picked from commit 08ad6abd04)
Turns out the RDB checksum in Redis 6.0 on bigendian is broken.
It always returned 0, so the RDB files are generated as if checksum is
disabled, and will be loaded ok on littleendian, and on bigendian.
But it'll not be able to load RDB files generated on littleendian or older versions.
Similarly DUMP and RESTORE will work on the same version (0==0),
but will be unable to exchange dump payloads with littleendian or old versions.
(cherry picked from commit 324070c8f6)
getRDB is "designed" to work in two modes: one for redis-cli --rdb and
one for redis-cli --cluster backup.
in the later case it uses the hiredis connection from the cluster nodes
and it used to free it without nullifying the context, so a later
attempt to free the context would crash.
I suppose the reason it seems to want to free the hiredis context ASAP
is that it wants to disconnect the replica link, so that replication
buffers will not be accumulated.
(cherry picked from commit 41b2ed2bbc)
When a Lua script returns a map to redis (a feature which was added in
redis 6 together with RESP3), it would have returned the value first and
the key second.
If the client was using RESP2, it was getting them out of order, and if
the client was in RESP3, it was getting a map of value => key.
This was happening regardless of the Lua script using redis.setresp(3)
or not.
This also affects a case where the script was returning a map which it got
from from redis by doing something like: redis.setresp(3); return redis.call()
This fix is a breaking change for redis 6.0 users who happened to rely
on the wrong order (either ones that used redis.setresp(3), or ones that
returned a map explicitly).
This commit also includes other two changes in the tests:
1. The test suite now handles RESP3 maps as dicts rather than nested
lists
2. Remove some redundant (duplicate) tests from tracking.tcl
(cherry picked from commit 2017407b4d)
The crash log attempts to print the current client info, and when it
does that it attempts to check if the first argument happens to be a key
but it did so for commands with no arguments too, which caused the crash
log to crash half way and not reach its end.
(cherry picked from commit 152b5d46c4)
Normally IO threads should simply read data from the socket into the
buffer and attempt to parse it.
If a protocol error is detected, a reply is generated which may result
with installing a write handler which is not thread safe. This fix
delays that until the client is processed back in the main thread.
Fixes#8220
(cherry picked from commit e7047ec2fc)
Older arm64 Linux kernels have a bug that could lead to data corruption during
background save under the following scenario:
1) jemalloc uses MADV_FREE on a page,
2) jemalloc reuses and writes the page,
3) Redis forks the background save process, and
4) Linux performs page reclamation.
Under these conditions, Linux will reclaim the page wrongfully and the
background save process will read zeros when it tries to read the page.
The bug has been fixed in Linux with commit:
ff1712f953e27f0b0718762ec17d0adb15c9fd0b ("arm64: pgtable: Ensure dirty bit is
preserved across pte_wrprotect()")
This Commit adds an ignore-warnings config, when not found, redis will
print a warning and exit on startup (default behavior).
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit b02780c41d)
in 6.0 this warning is ignored by default in order to avoid adding
regression, specifically for deployments that don't need persistence or
replication
In response to large client query buffer optimization introduced in 1898e6c. The calculation of the amount of
remaining bytes we need to write to the query buffer was calculated wrong, as a result we are unnecessarily
growing the client query buffer by sdslen(c->querybuf) always. This fix corrects that behavior.
Please note the previous behavior prior to the before-mentioned change was correctly calculating the remaining
additional bytes, and this change makes that calculate to be consistent.
Useful context, the argument of size `ll` starts at qb_pos (which is now the beginning of the sds), but much of it
may have already been read from the socket, so we only need to grow the sds for the remainder of it.
(cherry picked from commit 11b3325e99)
Module blocked clients cache the response in a temporary client,
the reply list in this client would be affected by the recent fix
in #7202, but when the reply is later copied into the real client,
it would have bypassed all the checks for output buffer limit, which
would have resulted in both: responding with a partial response to
the client, and also not disconnecting it at all.
(cherry picked from commit 48efc25f74)
Makes spt_init more careful with assumptions about what memory regions
may be overwritten. It will now only consider a contiguous block of argv
and envp elements and mind any gaps.
(cherry picked from commit ec02c761aa)
Seems to have gone unnoticed for a long time, because at least with
glibc it will only be triggered if setenv() was called before spt_init,
which Redis doesn't.
Fixes#8064.
(cherry picked from commit 7e5a6313f0)
When replica diskless-load type is swapdb in cluster mode, we didn't backup
keys to slots map, so we will lose keys to slots map if fail to sync.
Now we backup keys to slots map at first, and restore it properly when fail.
This commit includes a refactory/cleanup of the backups mechanism (moving it to db.c and re-structuring it a bit).
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit b55a827ea2)
On FLUSHDB or full sync, reset old average TTL stat.
This Stat is incrementally collected by the master over time when it searches for expired keys.
(cherry picked from commit c85bf2352d)
This is hopefully usually harmles.
The server.ready_keys will usually be empty so the code after releasing
the GIL will soon be done.
The only case where it'll actually process things is when a module
releases a client (or module) blocked on a key, by triggering this NOT
from within a command (e.g. a timer event).
This bug was introduced in redis 6.0.9, see #7903
(cherry picked from commit e6fa47380a)
Fix: When oom-score-adj-values is provided in the config file after
oom-score-adj yes, it'll take an immediate action, before
readOOMScoreAdj was acquired, resulting in an error (out of range score
due to uninitialized value. delay the reaction the real call is made by
main().
Since the values are clamped to -1000..1000, and they're
applied as an offset from the value at startup (which may be -1000), we
need to allow the offsets to reach to +2000 so that a value of +1000 is
achievable in case the value at startup was -1000.
Adding an option for absolute values rather than relative ones.
(cherry picked from commit 61954951ed)
The bug was introduced by #5021 which only attempted avoid EXIST on an
already expired key from returning 1 on a replica.
Before that commit, dbExists was used instead of
lookupKeyRead (which had an undesired effect to "touch" the LRU/LFU)
Other than that, this commit fixes OBJECT to also come empty handed on
expired keys in replica.
And DEBUG DIGEST-VALUE to behave like DEBUG OBJECT (get the data from
the key regardless of it's expired state)
(cherry picked from commit f8ae991717)
In redisFork(), we don't set child pid, so updateDictResizePolicy()
doesn't take effect, that isn't friendly for copy-on-write.
The bug was introduced this in redis 6.0: 56258c6
(cherry picked from commit 89c78a9808)
When using a system with no malloc_usable_size(), zmalloc_size() assumed
that the heap allocator always returns blocks that are long-padded.
This may not always be the case, and will result with zmalloc_size()
returning a size that is bigger than allocated. At least in one case
this leads to out of bound write, process crash and a potential security
vulnerability.
Effectively this does not affect the vast majority of users, who use
jemalloc or glibc.
This problem along with a (different) fix was reported by Drew DeVault.
(cherry picked from commit 9824fe3e39)
The tests sometimes fail to find a log message.
Recently i added a print that shows the log files that are searched
and it shows that the message was in deed there.
The only reason i can't think of for this seach to fail, is we we
happened to read an incomplete line, which didn't match our pattern and
then on the next iteration we would continue reading from the line after
it.
The fix is to always re-evaluation the previous line.
(cherry picked from commit 4e2e5be201)
`info Persistence` will include correct (updated) rdb_last_bgsave_time_sec
For diskless bgsave (sockets) too (like a few other persistence info fields).
Refactor code to reduce duplicate code.
(cherry picked from commit e05a7df7f9)
Previous code would have added default redis save parameters
to the config file on rewrite, which would have been silently ignored
when the config file is loaded.
The new code avoids adding this, and also actively removes these lines
If added by a previous config rewrite.
(cherry picked from commit 0f370f9b66)
This wrong behavior was backed by a test, and also documentation, and dates back to 2010.
But it makes no sense to anyone involved so it was decided to change that.
Note that 20eeddf (invalidate watch on expire on access) was released in 6.0 RC2
and 2d1968f released in in 6.0.0 GA (invalidate watch when key is evicted).
both of which do similar changes.
(cherry picked from commit 556acefe75)
Adding the ":{tag}" only if --cluster is used, so that when used against
a proxy it generates traffic to all shards.
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit 6cf23d6610)
minor fix for a bug which happen on error handling code
and doesn't look like it could have caused any real harm
(fd number wouldn't have been reused yet)
(cherry picked from commit 04a0af9085)
In some cases one command added a very big bulk of memory, and this
would be "resolved" by the eviction before the next command.
Seeing an unexplained mass eviction we would wish to
know the highest momentary usage too.
Tracking it in call() and beforeSleep() adds some hooks in AOF and RDB
loading.
The fix in clientsCronTrackExpansiveClients is related to #7874
(cherry picked from commit 457b7073b5)
This is a compatibility issue with redis 5.0 that was introduced by ACL.
Before this commit, setting requirepass to an empty string will result
in a server that needs an empty AUTH, unlike redis 5.0 which would
accept connections without an AUTH.
(cherry picked from commit 19418b6b28)
If we fail or stop to rewrite aof, we need to remove temporary aof.
We also remove temporary rdb when replicas abort to receive rdb.
But currently we delete them in main thread, to avoid blocking,
we should use bg_unlink to remove them in a background thread.
Btw, we have already used this way to removed child process temporary rdb.
(cherry picked from commit aaacb8c955)
- Clarify some documentation comments
- Make sure blocked-on-keys client privdata is accessible
from withing the timeout callback
- Handle blocked clients in beforeSleep - In case a key
becomes "ready" outside of processCommand
See #7879#7880
(cherry picked from commit addf47dcac)
This cleans up and simplifies the API by passing the command name as the
first argument. Previously the command name was specified explicitly,
but was still included in the argv.
(cherry picked from commit 056a43e1a6)
* Introduce a new API's: RM_GetContextFlagsAll, and
RM_GetKeyspaceNotificationFlagsAll that will return the
full flags mask of each feature. The module writer can
check base on this value if the Flags he needs are
supported or not.
* For each flag, introduce a new value on redismodule.h,
this value represents the LAST value and should be there
as a reminder to update it when a new value is added,
also it will be used in the code to calculate the full
flags mask (assuming flags are incrementally increasing).
In addition, stated that the module writer should not use
the LAST flag directly and he should use the GetFlagAll API's.
* Introduce a new API: RM_IsSubEventSupported, that returns for a given
event and subevent, whether or not the subevent supported.
* Introduce a new macro RMAPI_FUNC_SUPPORTED(func) that returns whether
or not a function API is supported by comparing it to NULL.
* Introduce a new API: int RM_GetServerVersion();, that will return the
current Redis version in the format 0x00MMmmpp; e.g. 0x00060008;
* Changed unstable version from 999.999.999 to 255.255.255
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
(cherry picked from commit adc3183cd2)
This API function makes it possible to retrieve the X.509 certificate
used by clients to authenticate TLS connections.
(cherry picked from commit 0aec98dce2)
The main motivation here is to provide a way for modules to create a
single, global context that can be used for logging.
Currently, it is possible to obtain a thread-safe context that is not
attached to any blocked client by using `RM_GetThreadSafeContext`.
However, the attached context is not linked to the module identity so
log messages produced are not tagged with the module name.
Ideally we'd fix this in `RM_GetThreadSafeContext` itself but as it
doesn't accept the current context as an argument there's no way to do
that in a backwards compatible manner.
(cherry picked from commit 907da0580b)
This is essentially the same as calling COMMAND GETKEYS but provides a
more efficient interface that can be used in every context (i.e. not a
Redis command).
(cherry picked from commit 7d117d7591)
Avoid using a static buffer for short key index responses, and make it
caller's responsibility to stack-allocate a result type. Responses that
don't fit are still allocated on the heap.
(cherry picked from commit 9b7f8ba84b)
I suppose that it was overlooked, since till recently none of the blocked commands were readonly.
other changes:
- add test for the above.
- add better support for additional (and deferring) clients for
cluster tests
- improve a test which left the client in MULTI state.
(cherry picked from commit 216c110609)
track and report memory used by clients argv.
this is very usaful in case clients started sending a command and didn't
complete it. in which case the first args of the command are already
trimmed from the query buffer.
in an effort to avoid cache misses and overheads while keeping track of
these, i avoid calling sdsZmallocSize and instead use the sdslen /
bulk-len which can at least give some insight into the problem.
This memory is now added to the total clients memory usage, as well as
the client list.
(cherry picked from commit bea40e6a41)
Adding -D option for redis-cli to control newline between command
responses in raw mode.
Also removing cleanup code before calling exit, just in order
to avoid adding more adding more cleanup code (redis doesn't
bother to release allocations before exit anyway)
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit 6418d767e8)
The MEMORY command is used for debugging memory usage, so it should include internal
fragmentation, same as used_memory
(cherry picked from commit eb6241a3dd)
PROBLEM:
[$rd1 read] reads invalidation messages one by one, so it's never going to see the second invalidation message produced after INCR b, whether or not it exists. Adding another read will block incase no invalidation message is produced.
FIX:
We switch the order of "INCR a" and "INCR b" - now "INCR b" comes first. We still only read the first invalidation message produces. If an invalidation message is wrongly produces for b - then it will be produced before that of a, since "INCR b" comes before "INCR a".
Co-authored-by: Nitai Caro <caronita@amazon.com>
(cherry picked from commit 8fb89a5728)
When REDISMODULE_EVENT_CLIENT_CHANGE events are delivered, modules may
want to mutate the client state (e.g. perform authentication).
This change links the module context with the real client rather than a
fake client for these events.
(cherry picked from commit 67b43f75e2)
The client pointed to by the module context may in some cases be a fake
client. RM_Authenticate*() calls in this case would be ineffective but
appear to succeed, and this change fails them to make it easier to catch
such cases.
(cherry picked from commit cfccfbd6f4)
The tls-ca-cert or tls-ca-cert-dir configuration parameters are only
used when Redis needs to authenticate peer certificates, in one of these
scenarios:
1. Incoming clients or replicas, with `tls-auth-clients` enabled.
2. A replica authenticating the master's peer certificate.
3. Cluster nodes authenticating other nodes when establishing the bus
protocol connection.
(cherry picked from commit 1591e3479d)
when slaveof config is "no one", reset any pre-existing config and resume.
also solve a memory leak if slaveof appears twice.
and fail loading if port number is out of range or not an integer.
Co-authored-by: caozhengbin <caozb@yidingyun.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit a295770e32)
There's currently an issue with IO threads and gopher (issuing lookupKey from within the thread).
simply fix is to just not support it for now.
(cherry picked from commit c9f00bcce2)
We may access and modify these two variables in signal handler function,
to guarantee them async-signal-safe, so we should set them to volatile
sig_atomic_t type.
It doesn't look like this could have caused any real issue, and it seems that
signals are handled in main thread on most platforms. But we want to follow C
and POSIX standard in signal handler function.
(cherry picked from commit f1863a1fe7)
Make sure we handle short writes correctly, sync to disk after writing and use
rename to make sure the replacement is actually atomic.
In any case of failure old configuration will remain in place.
Also, add some additional logging to make it easier to diagnose rewrite problems.
(cherry picked from commit c30bd02c9d)
We should sync temp DB file before renaming as rdb_fsync_range does not use
flag `SYNC_FILE_RANGE_WAIT_AFTER`.
Refer to `Linux Programmer's Manual`:
SYNC_FILE_RANGE_WAIT_AFTER
Wait upon write-out of all pages in the range after performing any write.
(cherry picked from commit 0d62caab21)
When fclose would fail, the previous implementation would have attempted to do fclose again
this can in theory lead to segfault.
other changes:
check for non-zero return value as failure rather than a specific error code.
this doesn't fix a real bug, just a minor cleanup.
(cherry picked from commit 323029baa6)
Before this commit, we would have continued to add replies to the reply buffer even if client
output buffer limit is reached, so the used memory would keep increasing over the configured limit.
What's more, we shouldn’t write any reply to the client if it is set 'CLIENT_CLOSE_ASAP' flag
because that doesn't conform to its definition and we will close all clients flagged with
'CLIENT_CLOSE_ASAP' in ‘beforeSleep’.
Because of code execution order, before this, we may firstly write to part of the replies to
the socket before disconnecting it, but in fact, we may can’t send the full replies to clients
since OS socket buffer is limited. But this unexpected behavior makes some commands work well,
for instance ACL DELUSER, if the client deletes the current user, we need to send reply to client
and close the connection, but before, we close the client firstly and write the reply to reply
buffer. secondly, we shouldn't do this despite the fact it works well in most cases.
We add a flag 'CLIENT_CLOSE_AFTER_COMMAND' to mark clients, this flag means we will close the
client after executing commands and send all entire replies, so that we can write replies to
reply buffer during executing commands, send replies to clients, and close them later.
We also fix some implicit problems. If client output buffer limit is enforced in 'multi/exec',
all commands will be executed completely in redis and clients will not read any reply instead of
partial replies. Even more, if the client executes 'ACL deluser' the using user in 'multi/exec',
it will not read the replies after 'ACL deluser' just like before executing 'client kill' itself
in 'multi/exec'.
We added some tests for output buffer limit breach during multi-exec and using a pipeline of
many small commands rather than one with big response.
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit 57709c4bc6)
This happens only on diskless replicas when attempting to reconnect after
failing to load an RDB file. It is more likely to occur with larger datasets.
After reconnection is initiated, replicationEmptyDbCallback() may get called
and try to write to an unconnected socket. This triggered another issue where
the connection is put into an error state and the connect handler never gets
called. The problem is a regression introduced by commit c17e597.
(cherry picked from commit 1980f639b1)
redis-check-rdb was unable to parse rdb files containing module aux data.
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit 63a05dde46)
This commit adds streamIteratorStop call in rewriteStreamObject function in some of the return statement. Although currently this will not cause memory leak since stream id is only 16 bytes long.
(cherry picked from commit 23b50bcccc)
Refine comment of makeThreadKillable().
This commit can be backported to 5.0, only if we also backport 8b70cb0.
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit 647cac5bb4)
We're already using bg_unlink in several places to delete the rdb file in the background,
and avoid paying the cost of the deletion from our main thread.
This commit uses bg_unlink to remove the temporary rdb file in the background too.
However, in case we delete that rdb file just before exiting, we don't actually wait for the
background thread or the main thread to delete it, and just let the OS clean up after us.
i.e. we open the file, unlink it and exit with the fd still open.
Furthermore, rdbRemoveTempFile can be called from a thread and was using snprintf which is
not async-signal-safe, we now use ll2string instead.
(cherry picked from commit b002d2b4f1)
If one thread got SIGSEGV, function sigsegvHandler() would be triggered,
it would call bioKillThreads(). But call pthread_cancel() to cancel itself
would make it block. Also note that if SIGSEGV is caught by bio thread, it
should kill the main thread in order to give a positive report.
(cherry picked from commit 8b70cb0ef8)
This commit makes stream object returning "stream" as encoding type in OBJECT ENCODING subcommand and DEBUG OBJECT command.
Till now, it would return "unknown"
(cherry picked from commit 6ff741b5cf)
Before this commit, following command did not show --tls option:
./runtest-cluster --help
./runtest-sentinel --help
(cherry picked from commit 98c8ac0d70)
This test was nearly always failing on MacOS github actions.
This is because of bugs in the test that caused it to nearly always run
all 3 attempts and just look at the last one as the pass/fail creteria.
i.e. the test was nearly always running all 3 attempts and still sometimes
succeed. this is because the break condition was different than the test
completion condition.
The reason the test succeeded is because the break condition tested the
results of all 3 tests (PSETEX/PEXPIRE/PEXPIREAT), but the success check
at the end was only testing the result of PSETEX.
The reason the PEXPIREAT test nearly always failed is because it was
getting the current time wrong: getting the current second and loosing
the sub-section time, so the only chance for it to succeed is if it run
right when a certain second started.
Because i now get the time from redis, adding another round trip, i
added another 100ms to the PEXPIRE test to make it less fragile, and
also added many more attempts.
Adding many more attempts before failure to account for slow platforms,
github actions and valgrind
(cherry picked from commit ed9bfe2262)
I think the compiler would have removed this no-op anyways but it
definitely wasted me some 30 minutes on this :(
I was hoping I could remove the branch through some bit-hacking but
apparently its dead code :). Oh well, its 30 minutes of refreshing
bit hacking.
Signed-off-by: Hanif Bin Ariffin <hanif.ariffin.4326@gmail.com>
The key save delay is too short and on certain systems the child process
is gone before we have a chance to inspect it.
(cherry picked from commit b2a73c404b)
This is a catch-all test to confirm that that rewrite produces a valid
output for all parameters and that this process does not introduce
undesired configuration changes.
(cherry picked from commit a8b7268911)
Improve RM_Call inline documentation about the fmt argument
so that we don't completely depend on the web docs.
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit ce15620dc1)
THP can also be set to madvise, in which case it shouldn't cause
problems for Redis since redis (or the allocator) doesn't use madvise
to activate it.
(cherry picked from commit b2419c31c1)
There was a bug. Although cluster replicas would allow read commands,
they would not allow a MULTI-EXEC that's composed solely of read commands.
Adds tests for coverage.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Eran Liberty <eranl@amazon.com>
(cherry picked from commit b120366d48)
if there are nested tests and nested servers, we need to restore the
previous value of cur_test when a test exist.
example:
```
test{test 1} {
start_server {
test{test 1.1 - master only} {
}
start_server {
test{test 1.2 - with replication} {
}
}
}
}
```
when `test 1.1 - master only exists`, we're still inside `test 1`
(cherry picked from commit 0a1e734193)
1) cur_test: when restart_server, "no such variable" error occurs
./runtest --single integration/rdb
test {client freed during loading}
SET ::cur_test
restart_server
kill_server
test "Check for memory leaks (pid $pid)"
SET ::cur_test
UNSET ::cur_test
UNSET ::cur_test // This global variable has been unset.
2) `ps --ppid` not available on macOS platform, can be replaced with
`pgrep -P pid`.
(cherry picked from commit f22fa9594d)
This test was failing from time to time see discussion at the bottom of #7635
This was probably due to timing, the DEBUG SLEEP executed by redis-cli
didn't sleep for enough time.
This commit changes:
1) use SET-ACTIVE-EXPIRE instead of DEBUG SLEEP
2) reduce many `after` sleeps with retry loops to speed up the test.
3) add many comment explaining the different steps of the test and
it's purpose.
4) config appendonly before populating the volatile keys, so that they'll
be part of the AOF command stream rather than the preamble RDB portion.
other complications: recently kill_instance switched from SIGKILL to
SIGTERM, and this would sometimes fail since there was an AOFRW running
in the background. now we wait for it to end before attempting the kill.
(cherry picked from commit b491d477c3)
There is an inherent race condition in port allocation for spawned
servers. If a server fails to start because a port is taken, a new port
is allocated. This fixes a problem where the logs are not truncated and
as a result a large number of unmonitored servers are started.
(cherry picked from commit 2df4cb93ac)
2b998de46 added a file for stderr to keep valgrind log but i forgot to
add a similar thing when valgrind isn't being used.
the result is that `glob */err.txt` fails.
(cherry picked from commit 42ba7a1b75)
- redirect valgrind reports to a dedicated file rather than console
- try to avoid killing instances with SIGKILL so that we get the memory
leak report (killing with SIGTERM before resorting to SIGKILL)
- search for valgrind reports when done, print them and fail the tests
- add --dont-clean option to keep the logs on exit
- fix exit error code when crash is found (would have exited with 0)
changes that affect the normal redis test suite:
- refactor check_valgrind_errors into two functions one to search and
one to report
- move the search half into util.tcl to serve the cluster tests too
- ignore "address range perms" valgrind warnings which seem non relevant.
(cherry picked from commit 2b998de460)
in some cases a command that returns an error possibly due to a timing
issue causes the tcl code to crash and thus prevents the rest of the
tests from running. this adds an option to make the test proceed despite
the crash.
maybe it should be the default mode some day.
(cherry picked from commit fe5da2e60d)
- skip full units
- skip a single test (not just a list of tests)
- when skipping tag, skip spinning up servers, not just the tests
- skip tags when running against an external server too
- allow using multiple tags (split them)
(cherry picked from commit 677d14c213)
Fix issues with writeConn() which resulted with corruption of the stream by leaving an extra byte in the buffer. The trigger for this is partial writes or write errors which were not experienced on Linux but reported on macOS.
(cherry picked from commit 58e5feb3f4)
When redis isn't configured to have a log file, having these prints
before damonization puts them in the calling process stdout rather than
/dev/null
(cherry picked from commit 8b0747d657)
When runtest-cluster, at first, we need to create a cluster use spawn_instance,
a port which is not used is choosen, however sometimes we can't run server on
the port. possibley due to a race with another process taking it first.
such as redis/redis/runs/896537490. It may be due to the machine problem or
In order to reduce the probability of failure when start redis in
runtest-cluster, we attemp to use another port when find server do not start up.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: yanhui13 <yanhui13@meituan.com>
(cherry picked from commit e2d64485b8)
This fixes the issue described in CVE-2014-5461. At this time we cannot
confirm that the original issue has a real impact on Redis, but it is
included as an extra safety measure.
(cherry picked from commit d75ad774a9)
In order to keep the redismodule.h self-contained but still usable with
gcc v10 and later, annotate each API function tentative definition with
the __common__ attribute. This avoids the 'multiple definition' errors
modules will otherwise see for all API functions at link time.
Further details at gcc.gnu.org/gcc-10/porting_to.html
Turn the existing __attribute__ ((unused)), ((__common__)) and ((print))
annotations into conditional macros for any compilers not accepting this
syntax. These macros only expand to API annotations under gcc.
Provide a pre- and post- macro for every API function, so that they can
be defined differently by the file that includes redismodule.h.
Removing REDISMODULE_API_FUNC in the interest of keeping the function
declarations readable.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit 11cd983d58)
Add Linux kernel OOM killer control option.
This adds the ability to control the Linux OOM killer oom_score_adj
parameter for all Redis processes, depending on the process role (i.e.
master, replica, background child).
A oom-score-adj global boolean flag control this feature. In addition,
specific values can be configured using oom-score-adj-values if
additional tuning is required.
(cherry picked from commit 2530dc0ebd)
Added RedisModule_HoldString that either returns a
shallow copy of the given String (by increasing
the String ref count) or a new deep copy of String
in case its not possible to get a shallow copy.
Co-authored-by: Itamar Haber <itamar@redislabs.com>
(cherry picked from commit 3f494cc49d)
65a3307bc (released in 6.0.6) has a side effect, when processCommand
rejects a command with pre-made shared object error string, it trims the
newlines from the end of the string. if that string is later used with
addReply, the newline will be missing, breaking the protocol, and
leaving the client hung.
It seems that the only scenario which this happens is when replying with
-LOADING to some command, and later using that reply from the CONFIG
SET command (still during loading). this will result in hung client.
Refactoring the code in order to avoid trimming these newlines from
shared string objects, and do the newline trimming only in other cases
where it's needed.
Co-authored-by: Guy Benoish <guy.benoish@redislabs.com>
(cherry picked from commit 9fcd9e191e)
If the server gets MULTI command followed by only read
commands, and right before it gets the EXEC it reaches OOM,
the client will get OOM response.
So, from now on, it will get OOM response only if there was
at least one command that was tagged with `use-memory` flag
(cherry picked from commit b7289e912c)
Otherwise, it is treated as a single allocation and freed synchronously. The following logic is used for estimating the effort in constant-ish time complexity:
1. Check the number of nodes.
1. Add an allocation for each consumer group registered inside the stream.
1. Check the number of PELs in the first CG, and then add this count times the number of CGs.
1. Check the number of consumers in the first CG, and then add this count times the number of CGs.
(cherry picked from commit 5b0a06af48)
In case the redis is about to return broken reply we want to crash
with assert so that we are notified about the bug. see #7687.
(cherry picked from commit 8b428cf0f7)
When calling to LPOS command when RANK is higher than matches,
the return value is non valid response. For example:
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*-4
```
It may break client-side parser.
Now, we count how many replies were replied in the array.
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*0
```
(cherry picked from commit 9204a9b2c2)
It was also using the wrong struct, but luckily RedisModuleFlushInfo and RedisModuleLoadingProgress
are identical.
(cherry picked from commit a3d4d7bf68)
After fork, the child process(redis-aof-rewrite) will get the fd opened
by the parent process(redis), when redis killed by kill -9, it will not
graceful exit(call prepareForShutdown()), so redis-aof-rewrite thread may still
alive, the fd(lock) will still be held by redis-aof-rewrite thread, and
redis restart will fail to get lock, means fail to start.
This issue was causing failures in the cluster tests in github actions.
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit cbaf3c5bba)
Since users often post just the crash log in github issues, the log
print that's above it is missing.
No reason not to include the size in the panic message itself.
(cherry picked from commit 0f741a9e2d)
65a3307bc9 added rejectCommand which takes an robj reply and passes it
through addReplyErrorSafe to addReplyErrorLength.
The robj contains newline at it's end, but addReplyErrorSafe converts it
to spaces, and passes it to addReplyErrorLength which adds the protocol
newlines.
The result was that most error replies (like OOM) had extra two trailing
spaces in them.
(cherry picked from commit cdd925b289)
The `REDISMODULE_CLIENTINFO_FLAG_SSL` flag was already a part of the `RedisModuleClientInfo` structure but was not implemented.
(cherry picked from commit 64c360c515)
Avoid re-configuring (and validating) SSL/TLS configuration on `CONFIG
SET` when TLS is not actively enabled for incoming connections, cluster
bus or replication.
This fixes failures when tests run without `--tls` on binaries that were
built with TLS support.
An additional benefit is that it's now possible to perform a multi-step
configuration process while TLS is disabled. The new configuration will
be verified and applied only when TLS is effectively enabled.
(cherry picked from commit fb2a94af3f)
The two lines allow systemd to start redis.service after the network is online. Only after the network is online that Redis could bind to IP address other than 127.0.0.1 during initial boot up process.
(cherry picked from commit 8e937ce4cc)
In redismodule.h, RedisModule_DeauthenticateAndCloseClient returns void
`void REDISMODULE_API_FUNC(RedisModule_DeauthenticateAndCloseClient)(RedisModuleCtx *ctx, uint64_t client_id);`
But in module.c, RM_DeauthenticateAndCloseClient returns int
`int RM_DeauthenticateAndCloseClient(RedisModuleCtx *ctx, uint64_t client_id)`
It it safe to change return value from `void` to `int` from the user's perspective.
(cherry picked from commit d6220f12a9)
besides, hooks test was time sensitive. when the replica managed to
reconnect quickly after the client kill, the test would fail
(cherry picked from commit f7e7775990)
The Redis sentinel would crash with a segfault after a few minutes
because it tried to read from a page without read permissions. Check up
front whether the sds is long enough to contain redis:slave or
redis:master before memcmp() as is done everywhere else in
sentinelRefreshInstanceInfo().
Bug report and commit message from Theo Buehler. Fix from Nam Nguyen.
Co-authored-by: Nam Nguyen <namn@berkeley.edu>
(cherry picked from commit 63dae52324)
valsize was not modified during the for loop below instead of getting from c->argv[4], therefore there is no need to put inside the for loop.. Moreover, putting the check outside loop will also avoid memory leaking, decrRefCount(key) should be called in the original code if we put the check in for loop
(cherry picked from commit c69a9b2f61)
The connection API may create an accepted connection object in an error
state, and callers are expected to check it before attempting to use it.
Co-authored-by: mrpre <mrpre@163.com>
(cherry picked from commit 784ceeb90d)
- the test now waits for specific set of log messages rather than wait for
timeout looking for just one message.
- we don't wanna sample the current length of the log after an action, due
to a race, we need to start the search from the line number of the last
message we where waiting for.
- when attempting to trigger a full sync, use multi-exec to avoid a race
where the replica manages to re-connect before we completed the set of
actions that should force a full sync.
- fix verify_log_message which was broken and unused
(cherry picked from commit 109b5ccdcd)
Adds an `optional` value to the previously boolean `tls-auth-clients` configuration keyword.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
(cherry picked from commit f31260b044)
Initialize and configure OpenSSL even when tls-port is not used, because
we may still have tls-cluster or tls-replication.
Also, make sure to reconfigure OpenSSL when these parameters are changed
as TLS could have been enabled for the first time.
(cherry picked from commit c75512d89d)
on ci.redis.io the test fails a lot, reporting that bgsave didn't end.
increaseing the timeout we wait for that bgsave to get aborted.
in addition to that, i also verify that it indeed got aborted by
checking that the save counter wasn't reset.
add another test to verify that a successful bgsave indeed resets the
change counter.
(cherry picked from commit 8a57969fd7)
in cases where you have
test name {
start_server {
start_server {
assert
}
}
}
the exception will be thrown to the test proc, and the servers are
supposed to be killed on the way out. but it seems there was always a
bug of not cleaning the server stack, and recently (#7404) we started
relying on that stack in order to kill them, so with that bug sometimes
we would have tried to kill the same server twice, and leave one alive.
luckly, in most cases the pattern is:
start_server {
test name {
}
}
(cherry picked from commit 36b9494385)
This re-implements the redis-cli --pipe test so it no longer depends on a close feature available only in TCL 8.6.
Basically what this test does is run redis-cli --pipe, generates a bunch of commands and pipes them through redis-cli, and inspects the result in both Redis and the redis-cli output.
To do that, we need to close stdin for redis-cli to indicate we're done so it can flush its buffers and exit. TCL has bi-directional channels can only offers a way to "one-way close" a channel with TCL 8.6. To work around that, we now generate the commands into a file and feed that file to redis-cli directly.
As we're writing to an actual file, the number of commands is now reduced.
(cherry picked from commit f57e844b2e)
Since the dynamic allocations in raxIterator are only used for deep walks, memory
leak due to missing call to raxStop can only happen for rax with key names longer
than 32 bytes.
Out of all the missing calls, the only ones that may lead to a leak are the rax
for consumer groups and consumers, and these were only in AOFRW and rdbSave, which
normally only happen in fork or at shutdown.
(cherry picked from commit 4e8f2d6881)
Specifically, the key passed to the module aof_rewrite callback is a stack allocated robj. When passing it to RedisModule_EmitAOF (with appropriate "s" fmt string) redis used to panic when trying to inc the ref count of the stack allocated robj. Now support such robjs by coying them to a new heap robj. This doesn't affect performance because using the alternative "c" or "b" format strings also copies the input to a new heap robj.
(cherry picked from commit d484b8a04e)
in case the rdb child failed, crashed or terminated unexpectedly redis
would have marked the replica clients with repl_put_online_on_ack and
then kill them only after a minute when no ack was received.
it would not stream anything to these connections, so the only effect of
this bug is a delay of 1 minute in the replicas attempt to re-connect.
(cherry picked from commit a176cb56a3)
Before this commit, the output of "./runtest-cluster --help" is incorrect.
After this commit, the format of the following 3 output is consistent:
./runtest --help
./runtest-cluster --help
./runtest-sentinel --help
(cherry picked from commit 8128d39737)
interestingly the latency monitor test fails because valgrind is slow
enough so that the time inside PEXPIREAT command from the moment of
the first mstime() call to get the basetime until checkAlreadyExpired
calls mstime() again is more than 1ms, and that test was too sensitive.
using this opportunity to speed up the test (unrelated to the failure)
the fix is just the longer time passed to PEXPIRE.
(cherry picked from commit e5227aab89)
in the majority of the cases (on this rarely used feature) we want to
stop and be able to connect to the shard with redis-cli.
since these are two different processes interracting with the tty we
need to stop both, and we'll have to hit enter twice, but it's not that
bad considering it is rarely used.
(cherry picked from commit 02ef355f98)
* update daily CI to include cluster and sentinel tests
* update daily CI to run when creating a new release
* update release scripts to work on the new redis.io hosts
(cherry picked from commit 7f19a04f0f)
* fix description about ZIP_BIG_PREVLEN(the code is ok), it's similar to
antirez#4705
* fix description about ziplist entry encoding field (the code is ok),
the max length should be 2^32 - 1 when encoding is 5 bytes
(cherry picked from commit 67660881ed)
* Tests: fix and reintroduce redis-cli tests.
These tests have been broken and disabled for 10 years now!
* TLS: add remaining redis-cli support.
This adds support for the redis-cli --pipe, --rdb and --replica options
previously unsupported in --tls mode.
* Fix writeConn().
(cherry picked from commit d9f970d8d3)
Similarly to EXPIREAT with TTL in the past, which implicitly deletes the
key and return success, RESTORE should not store key that are already
expired into the db.
When used together with REPLACE it should emit a DEL to keyspace
notification and replication stream.
(cherry picked from commit 5977a94842)
On some platforms strtold("+inf") with valgrind returns a non-inf result
[err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
(cherry picked from commit 909bc97c52)
tests were sensitive to additional log lines appearing in the log
causing the search to come empty handed.
instead of just looking for the n last log lines, capture the log lines
before performing the action, and then search from that offset.
(cherry picked from commit 8e76e13472)
* tests/valgrind: don't use debug restart
DEBUG REATART causes two issues:
1. it uses execve which replaces the original process and valgrind doesn't
have a chance to check for errors, so leaks go unreported.
2. valgrind report invalid calls to close() which we're unable to resolve.
So now the tests use restart_server mechanism in the tests, that terminates
the old server and starts a new one, new PID, but same stdout, stderr.
since the stderr can contain two or more valgrind report, it is not enough
to just check for the absence of leaks, we also need to check for some known
errors, we do both, and fail if we either find an error, or can't find a
report saying there are no leaks.
other changes:
- when killing a server that was already terminated we check for leaks too.
- adding DEBUG LEAK which was used to test it.
- adding --trace-children to valgrind, although no longer needed.
- since the stdout contains two or more runs, we need slightly different way
of checking if the new process is up (explicitly looking for the new PID)
- move the code that handles --wait-server to happen earlier (before
watching the startup message in the log), and serve the restarted server too.
* squashme - CR fixes
(cherry picked from commit 69ade87325)
For example:
BITOP not targetkey sourcekey
If targetkey and sourcekey doesn't exist, BITOP has no effect,
we do not propagate it, thus can save aof and replica flow.
(cherry picked from commit 1978f996d8)
In order to support the use of multi-exec in pipeline, it is important that
MULTI and EXEC are never rejected and it is easy for the client to know if the
connection is still in multi state.
It was easy to make sure MULTI and DISCARD never fail (done by previous
commits) since these only change the client state and don't do any actual
change in the server, but EXEC is a different story.
Since in the past, it was possible for clients to handle some EXEC errors and
retry the EXEC, we now can't affort to return any error on EXEC other than
EXECABORT, which now carries with it the real reason for the abort too.
Other fixes in this commit:
- Some checks that where performed at the time of queuing need to be re-
validated when EXEC runs, for instance if the transaction contains writes
commands, it needs to be aborted. there was one check that was already done
in execCommand (-READONLY), but other checks where missing: -OOM, -MISCONF,
-NOREPLICAS, -MASTERDOWN
- When a command is rejected by processCommand it was rejected with addReply,
which was not recognized as an error in case the bad command came from the
master. this will enable to count or MONITOR these errors in the future.
- make it easier for tests to create additional (non deferred) clients.
- add tests for the fixes of this commit.
(cherry picked from commit 65a3307bc9)
The scan key module API provides the scan callback with the current
field name and value (if it exists). Those arguments are RedisModuleString*
which means it supposes to point to robj which is encoded as a string.
Using createStringObjectFromLongLong function might return robj that
points to an integer and so break a module that tries for example to
use RedisModule_StringPtrLen on the given field/value.
The PR introduces a fix that uses the createObject function and sdsfromlonglong function.
Using those function promise that the field and value pass to the to the
scan callback will be Strings.
The PR also changes the Scan test module to use RedisModule_StringPtrLen
to catch the issue. without this, the issue is hidden because
RedisModule_ReplyWithString knows to handle integer encoding of the
given robj (RedisModuleString).
The PR also introduces a new test to verify the issue is solved.
(cherry picked from commit a89bf734a9)
1. fix cases where null pointer might be accessed
2. make assignmnet op safe
3. make operator bool explicit (safe bool idiom)
4. make comparison operators symetric
fix robj_sharedptr use in rdb.cpp
The `LRANK` command returns the index (position) of a given element
within a list. Using the `direction` argument it is possible to specify
going from head to tail (acending, 1) or from tail to head (decending,
-1). Only the first found index is returend. The complexity is O(N).
When using lists as a queue it can be of interest at what position a
given element is, for instance to monitor a job processing through a
work queue. This came up within the Python `rq` project which is based
on Redis[0].
[0]: https://github.com/rq/rq/issues/1197
Signed-off-by: Paul Spooren <mail@aparcar.org>
Much like MULTI/EXEC/DISCARD, the WATCH and UNWATCH are not actually
operating on the database or server state, but instead operate on the
client state. the client may send them all in one long pipeline and check
all the responses only at the end, so failing them may lead to a
mismatch between the client state on the server and the one on the
client end, and execute the wrong commands (ones that were meant to be
discarded)
the watched keys are not actually stored in the client struct, but they
are in fact part of the client state. for instance, they're not cleared
or moved in SWAPDB or FLUSHDB.
the recent change in that loop (iteration rather than waiting for it to
be empty) was intended to avoid an endless loop in case some slave would
refuse to be freed.
but the lookup of the first client remained, which would have caused it
to try the first one again and again instead of moving on.
This impacts client verification for chained certificates (such as Lets
Encrypt certificates). Client Verify requires the full chain in order to
properly verify the certificate.
`clusterStartHandshake` will start hand handshake
and eventually send CLUSTER MEET message, which is strictly prohibited
in the REDIS CLUSTER SPEC.
Only system administrator can initiate CLUSTER MEET message.
Futher, according to the SPEC, rather than IP/PORT pairs, only nodeid
can be trusted.
Now it is also possible for ACL SETUSER to accept empty strings
as valid operations (doing nothing), so for instance
ACL SETUSER myuser ""
Will have just the effect of creating a user in the default state.
This should fix#7329.
2020-06-06 11:43:29 +02:00
326 changed files with 17973 additions and 3713 deletions
[](https://gitter.im/KeyDB/community?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge)
##### New! Want to extend KeyDB with Javascript? Try [ModJS](https://github.com/JohnSully/ModJS)
@@ -9,6 +8,8 @@
##### Have feedback? Take our quick survey: https://www.surveymonkey.com/r/Y9XNS93
##### KeyDB is Hiring! We are currently building out our dev team. If you are interested please see the posting here: https://keydb.dev/careers.html
What is KeyDB?
--------------
@@ -16,11 +17,13 @@ KeyDB is a high performance fork of Redis with a focus on multithreading, memory
KeyDB maintains full compatibility with the Redis protocol, modules, and scripts. This includes the atomicity guarantees for scripts and transactions. Because KeyDB keeps in sync with Redis development KeyDB is a superset of Redis functionality, making KeyDB a drop in replacement for existing Redis deployments.
On the same hardware KeyDB can perform twice as many queries per second as Redis, with 60% lower latency. Active-Replication simplifies hot-spare failover allowing you to easily distribute writes over replicas and use simple TCP based load balancing/failover. KeyDB's higher performance allows you to do more on less hardware which reduces operation costs and complexity.
On the same hardware KeyDB can achieve significantly higher throughput than Redis. Active-Replication simplifies hot-spare failover allowing you to easily distribute writes over replicas and use simple TCP based load balancing/failover. KeyDB's higher performance allows you to do more on less hardware which reduces operation costs and complexity.
See the full benchmark results and setup information here: https://docs.keydb.dev/blog/2020/09/29/blog-post/
Why fork Redis?
---------------
@@ -83,6 +86,8 @@ Building KeyDB
KeyDB can be compiled and is tested for use on Linux. KeyDB currently relies on SO_REUSEPORT's load balancing behavior which is available only in Linux. When we support marshalling connections across threads we plan to support other operating systems such as FreeBSD.
More on CentOS/Archlinux/Alpine/Debian/Ubuntu dependencies and builds can be found here: https://docs.keydb.dev/docs/build/
2. Substitute it with the new jemalloc source tree.
3. Edit the Makefile localted in the same directory as the README you are
3. Edit the Makefile located in the same directory as the README you are
reading, and change the --with-version in the Jemalloc configure script
options with the version you are using. This is required because otherwise
Jemalloc configuration script is broken and will not work nested in another
@@ -33,7 +33,7 @@ If you want to upgrade Jemalloc while also providing support for
active defragmentation, in addition to the above steps you need to perform
the following additional steps:
5. In Jemalloc three, file `include/jemalloc/jemalloc_macros.h.in`, make sure
5. In Jemalloc tree, file `include/jemalloc/jemalloc_macros.h.in`, make sure
to add `#define JEMALLOC_FRAG_HINT`.
6. Implement the function `je_get_defrag_hint()` inside `src/jemalloc.c`. You
can see how it is implemented in the current Jemalloc source tree shipped
@@ -47,9 +47,9 @@ Hiredis
Hiredis uses the SDS string library, that must be the same version used inside Redis itself. Hiredis is also very critical for Sentinel. Historically Redis often used forked versions of hiredis in a way or the other. In order to upgrade it is advised to take a lot of care:
1. Check with diff if hiredis API changed and what impact it could have in Redis.
2. Make sure thet the SDS library inside Hiredis and inside Redis are compatible.
2. Make sure that the SDS library inside Hiredis and inside Redis are compatible.
3. After the upgrade, run the Redis Sentinel test.
4. Check manually that redis-cli and redis-benchmark behave as expecteed, since we have no tests for CLI utilities currently.
4. Check manually that redis-cli and redis-benchmark behave as expected, since we have no tests for CLI utilities currently.
Linenoise
---
@@ -77,6 +77,6 @@ and our version:
1. Makefile is modified to allow a different compiler than GCC.
2. We have the implementation source code, and directly link to the following external libraries: `lua_cjson.o`, `lua_struct.o`, `lua_cmsgpack.o` and `lua_bit.o`.
3. There is a security fix in `ldo.c`, line 498: The check for `LUA_SIGNATURE[0]` is removed in order toa void direct bytecode execution.
3. There is a security fix in `ldo.c`, line 498: The check for `LUA_SIGNATURE[0]` is removed in order to avoid direct bytecode execution.
This directory contains scripts and components needed to generate debian packages on different distributions/architectures from source
The 'debian' directory contains debian source code for bionic, buster and later distributions as it uses functions only available with debhelper11+. 'debian_dh9' is used for xenial, stretch and earlier distributions using debhelper9.
You will need to install pbuilder `sudo apt install pbuilder` along with other distribution specific dependancies
Generate deb packages with the following script command run from this directory:
```
$ ./deb-buildsource.sh
```
This generates a directory structure, .dsc file, original.tar.gz, and new changelog for the distribution and architecture installed.
When complete the produced debian packages will be located in deb_files_generated directory.
Arguments for the deb-buildsource.sh script that can be passed are either 'None' or '"your custom comments"'. 'None' assumes a permanent changelog entry has been made listing the correct build for the version. If you quote and enter your own comment string, it will be appended to the changelog for that deb package. If no argument is passed a default comment is generated saying that this deb package was generated by this script.
This script has been tested on xenial/bionic/stretch/buster
* 5.1 release. This release includes subkey expires (EXPIREMEMBER/EXPIREMEMBERAT), with updates to PTTL/TTL accordingly. New OBJECT LASTMODIFIED, BITIOP LSHIFT & BITOP RSHIFT commands. See https://docs.keydb.dev/blog/2019/10/20/blog-post/ for detailed review of release.
-- Ben Schermel <ben@eqalpha.com> Mon, 21 Oct 2019 8:00:37 +0000
* 5.1 release. This release includes subkey expires (EXPIREMEMBER/EXPIREMEMBERAT), with updates to PTTL/TTL accordingly. New OBJECT LASTMODIFIED, BITIOP LSHIFT & BITOP RSHIFT commands. See https://docs.keydb.dev/blog/2019/10/20/blog-post/ for detailed review of release.
-- Ben Schermel <ben@eqalpha.com> Mon, 21 Oct 2019 8:00:37 +0000
Loaded 100 of 326 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
christianEQ
benschermel
benschermel
VivekSainiEQ
John Sully
Daniel Dai
Oran Agra
Bob Li
guybe7
Egor Seredin
Meir Shpilraien (Spielrein)
David CARLIER
Yossi Gottlieb
Madelyn Olson
Yang Bodong
Itamar Haber
Wen Hui
huangzhw
George Prekas
Qu Chen
Wang Yuan
Kajaruban Surendran
Zach Fewtrell
WuYunlong
filipe oliveira
Andreas Lind
Madelyn Olson
DvirDukhan
Rafi Einstein
nitaicaro
Gavrie Philipson
caozb
Wang Yuan
Uri Shachar
Guy Korland
yixiang
Ariel Shtul
Wang Yuan
Mykhailo Pylyp
Hanif Bin Ariffin
Dmitry Dorofeev
Yossi Gottlieb
Roi Lipman
Jan-Erik Rediger
Eran Liberty
Thandayuthapani
Leoš Literák
Nathan Scott
Arun Ranganathan
valentinogeron
Raghav Muddur
Wagner Francisco Mezaroba
zhaozhao.zz
zhaozhao.zz
YoongHM
Frank Meier
Frank Meier
namtsui
Jiayuan Chen
grishaf
Remi Collet
Scott Brenner
yoav-steinberg
Luke Palmer
dmurnane
Developer-Ecosystem-Engineering
jimgreen2013
马永泽
Abhishek Soni
James Hilliard
huangzhw
antirez
Dave Nielsen
chenhui0212
Tomasz Poradowski
root
Benjamin Sergeant
Jamie Scott
Muhammad Zahalqa
Paul Spooren
xhe
Kevin Fwu
Liu Zhen