Issue #1053 - Remove Android systrace, more build system removals.

Also updates more comments.
2022-04-01 15:28:15 +02:00
1 parent c14bb310ce
commit 426a9755d9
@@ -28,24 +28,12 @@ MOZ_ARG_WITH_STRING(arch,
 if test -z "$MOZ_ARCH"; then
    dnl Defaults
    case "${CPU_ARCH}-${OS_TARGET}" in
-    arm-Android)
-        MOZ_THUMB=yes
-        MOZ_ARCH=armv7-a
-        MOZ_FPU=vfp
-        MOZ_FLOAT_ABI=softfp
-        MOZ_ALIGN=no
-        ;;
    arm-Darwin)
        MOZ_ARCH=toolchain-default
        ;;
    esac
 fi

-if test "$MOZ_ARCH" = "armv6" -a "$OS_TARGET" = "Android"; then
-   MOZ_FPU=vfp
-   MOZ_FLOAT_ABI=softfp
-fi
-
 MOZ_ARG_WITH_STRING(thumb,
 [  --with-thumb[[=yes|no|toolchain-default]]]
 [                          Use Thumb instruction set (-mthumb)],
@@ -114,7 +114,7 @@ esac
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | \
  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
  knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \
  kopensolaris*-gnu* | \
@@ -122,10 +122,6 @@ case $maybe_os in
    os=-$maybe_os
    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
    ;;
-  android-linux)
-    os=-linux-android
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
-    ;;
  *)
    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
    if [ $basic_machine != $1 ]
@@ -1389,7 +1385,7 @@ case $os in
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* | -cegcc* \
 	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+	      | -mingw32* | -mingw64* | -linux-gnu* \
 	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
 	      | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
@@ -7,11 +7,6 @@ dnl disabling frame pointers in this architecture based on the configure
 dnl options

 AC_DEFUN([MOZ_SET_FRAMEPTR_FLAGS], [
-  case "$target" in
-  *android*)
-    unwind_tables="-funwind-tables"
-    ;;
-  esac
  if test "$GNU_CC"; then
    MOZ_ENABLE_FRAME_PTR="-fno-omit-frame-pointer $unwind_tables"
    MOZ_DISABLE_FRAME_PTR="-fomit-frame-pointer"
@@ -1,451 +0,0 @@
-# This Source Code Form is subject to the terms of the Mozilla Public
-# License, v. 2.0. If a copy of the MPL was not distributed with this file,
-# You can obtain one at http://mozilla.org/MPL/2.0/.
-
-import datetime
-import mozcrash
-import threading
-import os
-import posixpath
-import Queue
-import re
-import shutil
-import signal
-import tempfile
-import time
-import traceback
-import zipfile
-
-from automation import Automation
-from mozlog import get_default_logger
-from mozprocess import ProcessHandlerMixin
-
-
-class StdOutProc(ProcessHandlerMixin):
-    """Process handler for b2g which puts all output in a Queue.
-    """
-
-    def __init__(self, cmd, queue, **kwargs):
-        self.queue = queue
-        kwargs.setdefault('processOutputLine', []).append(self.handle_output)
-        ProcessHandlerMixin.__init__(self, cmd, **kwargs)
-
-    def handle_output(self, line):
-        self.queue.put_nowait(line)
-
-
-class B2GRemoteAutomation(Automation):
-    _devicemanager = None
-
-    def __init__(self, deviceManager, appName='', remoteLog=None,
-                 marionette=None):
-        self._devicemanager = deviceManager
-        self._appName = appName
-        self._remoteProfile = None
-        self._remoteLog = remoteLog
-        self.marionette = marionette
-        self._is_emulator = False
-        self.test_script = None
-        self.test_script_args = None
-
-        # Default our product to b2g
-        self._product = "b2g"
-        self.lastTestSeen = "b2gautomation.py"
-        # Default log finish to mochitest standard
-        self.logFinish = 'INFO SimpleTest FINISHED'
-        Automation.__init__(self)
-
-    def setEmulator(self, is_emulator):
-        self._is_emulator = is_emulator
-
-    def setDeviceManager(self, deviceManager):
-        self._devicemanager = deviceManager
-
-    def setAppName(self, appName):
-        self._appName = appName
-
-    def setRemoteProfile(self, remoteProfile):
-        self._remoteProfile = remoteProfile
-
-    def setProduct(self, product):
-        self._product = product
-
-    def setRemoteLog(self, logfile):
-        self._remoteLog = logfile
-
-    def getExtensionIDFromRDF(self, rdfSource):
-        """
-        Retrieves the extension id from an install.rdf file (or string).
-        """
-        from xml.dom.minidom import parse, parseString, Node
-
-        if isinstance(rdfSource, file):
-            document = parse(rdfSource)
-        else:
-            document = parseString(rdfSource)
-
-        # Find the <em:id> element. There can be multiple <em:id> tags
-        # within <em:targetApplication> tags, so we have to check this way.
-        for rdfChild in document.documentElement.childNodes:
-            if rdfChild.nodeType == Node.ELEMENT_NODE and rdfChild.tagName == "Description":
-                for descChild in rdfChild.childNodes:
-                    if descChild.nodeType == Node.ELEMENT_NODE and descChild.tagName == "em:id":
-                        return descChild.childNodes[0].data
-        return None
-
-    def installExtension(self, extensionSource, profileDir, extensionID=None):
-        # Bug 827504 - installing special-powers extension separately causes problems in B2G
-        if extensionID != "special-powers@mozilla.org":
-            if not os.path.isdir(profileDir):
-              self.log.info("INFO | automation.py | Cannot install extension, invalid profileDir at: %s", profileDir)
-              return
-
-            installRDFFilename = "install.rdf"
-
-            extensionsRootDir = os.path.join(profileDir, "extensions", "staged")
-            if not os.path.isdir(extensionsRootDir):
-              os.makedirs(extensionsRootDir)
-
-            if os.path.isfile(extensionSource):
-              reader = zipfile.ZipFile(extensionSource, "r")
-
-              for filename in reader.namelist():
-                # Sanity check the zip file.
-                if os.path.isabs(filename):
-                  self.log.info("INFO | automation.py | Cannot install extension, bad files in xpi")
-                  return
-
-                # We may need to dig the extensionID out of the zip file...
-                if extensionID is None and filename == installRDFFilename:
-                  extensionID = self.getExtensionIDFromRDF(reader.read(filename))
-
-              # We must know the extensionID now.
-              if extensionID is None:
-                self.log.info("INFO | automation.py | Cannot install extension, missing extensionID")
-                return
-
-              # Make the extension directory.
-              extensionDir = os.path.join(extensionsRootDir, extensionID)
-              os.mkdir(extensionDir)
-
-              # Extract all files.
-              reader.extractall(extensionDir)
-
-            elif os.path.isdir(extensionSource):
-              if extensionID is None:
-                filename = os.path.join(extensionSource, installRDFFilename)
-                if os.path.isfile(filename):
-                  with open(filename, "r") as installRDF:
-                    extensionID = self.getExtensionIDFromRDF(installRDF)
-
-                if extensionID is None:
-                  self.log.info("INFO | automation.py | Cannot install extension, missing extensionID")
-                  return
-
-              # Copy extension tree into its own directory.
-              # "destination directory must not already exist".
-              shutil.copytree(extensionSource, os.path.join(extensionsRootDir, extensionID))
-
-            else:
-              self.log.info("INFO | automation.py | Cannot install extension, invalid extensionSource at: %s", extensionSource)
-
-    # Set up what we need for the remote environment
-    def environment(self, env=None, xrePath=None, crashreporter=True, debugger=False):
-        # Because we are running remote, we don't want to mimic the local env
-        # so no copying of os.environ
-        if env is None:
-            env = {}
-
-        # We always hide the results table in B2G; it's much slower if we don't.
-        env['MOZ_HIDE_RESULTS_TABLE'] = '1'
-        return env
-
-    def waitForNet(self):
-        active = False
-        time_out = 0
-        while not active and time_out < 40:
-            data = self._devicemanager._runCmd(['shell', '/system/bin/netcfg']).stdout.readlines()
-            data.pop(0)
-            for line in data:
-                if (re.search(r'UP\s+(?:[0-9]{1,3}\.){3}[0-9]{1,3}', line)):
-                    active = True
-                    break
-            time_out += 1
-            time.sleep(1)
-        return active
-
-    def checkForCrashes(self, directory, symbolsPath):
-        crashed = False
-        remote_dump_dir = self._remoteProfile + '/minidumps'
-        print "checking for crashes in '%s'" % remote_dump_dir
-        if self._devicemanager.dirExists(remote_dump_dir):
-            local_dump_dir = tempfile.mkdtemp()
-            self._devicemanager.getDirectory(remote_dump_dir, local_dump_dir)
-            try:
-                logger = get_default_logger()
-                if logger is not None:
-                    crashed = mozcrash.log_crashes(logger, local_dump_dir, symbolsPath, test=self.lastTestSeen)
-                else:
-                    crashed = mozcrash.check_for_crashes(local_dump_dir, symbolsPath, test_name=self.lastTestSeen)
-            except:
-                traceback.print_exc()
-            finally:
-                shutil.rmtree(local_dump_dir)
-                self._devicemanager.removeDir(remote_dump_dir)
-        return crashed
-
-    def buildCommandLine(self, app, debuggerInfo, profileDir, testURL, extraArgs):
-        # if remote profile is specified, use that instead
-        if (self._remoteProfile):
-            profileDir = self._remoteProfile
-
-        cmd, args = Automation.buildCommandLine(self, app, debuggerInfo, profileDir, testURL, extraArgs)
-
-        return app, args
-
-    def waitForFinish(self, proc, utilityPath, timeout, maxTime, startTime,
-                      debuggerInfo, symbolsPath, outputHandler=None):
-        """ Wait for tests to finish (as evidenced by a signature string
-            in logcat), or for a given amount of time to elapse with no
-            output.
-        """
-        timeout = timeout or 120
-        while True:
-            lines = proc.getStdoutLines(timeout)
-            if lines:
-                currentlog = '\n'.join(lines)
-
-                if outputHandler:
-                    for line in lines:
-                        outputHandler(line)
-                else:
-                    print(currentlog)
-
-                # Match the test filepath from the last TEST-START line found in the new
-                # log content. These lines are in the form:
-                # ... INFO TEST-START | /filepath/we/wish/to/capture.html\n
-                testStartFilenames = re.findall(r"TEST-START \| ([^\s]*)", currentlog)
-                if testStartFilenames:
-                    self.lastTestSeen = testStartFilenames[-1]
-                if (outputHandler and outputHandler.suite_finished) or (
-                        hasattr(self, 'logFinish') and self.logFinish in currentlog):
-                    return 0
-            else:
-                self.log.info("TEST-UNEXPECTED-FAIL | %s | application timed "
-                              "out after %d seconds with no output",
-                              self.lastTestSeen, int(timeout))
-                self._devicemanager.killProcess('/system/b2g/b2g', sig=signal.SIGABRT)
-
-                timeout = 10 # seconds
-                starttime = datetime.datetime.utcnow()
-                while datetime.datetime.utcnow() - starttime < datetime.timedelta(seconds=timeout):
-                    if not self._devicemanager.processExist('/system/b2g/b2g'):
-                        break
-                    time.sleep(1)
-                else:
-                    print "timed out after %d seconds waiting for b2g process to exit" % timeout
-                    return 1
-
-                self.checkForCrashes(None, symbolsPath)
-                return 1
-
-    def getDeviceStatus(self, serial=None):
-        # Get the current status of the device.  If we know the device
-        # serial number, we look for that, otherwise we use the (presumably
-        # only) device shown in 'adb devices'.
-        serial = serial or self._devicemanager._deviceSerial
-        status = 'unknown'
-
-        for line in self._devicemanager._runCmd(['devices']).stdout.readlines():
-            result = re.match('(.*?)\t(.*)', line)
-            if result:
-                thisSerial = result.group(1)
-                if not serial or thisSerial == serial:
-                    serial = thisSerial
-                    status = result.group(2)
-
-        return (serial, status)
-
-    def restartB2G(self):
-        # TODO hangs in subprocess.Popen without this delay
-        time.sleep(5)
-        self._devicemanager._checkCmd(['shell', 'stop', 'b2g'])
-        # Wait for a bit to make sure B2G has completely shut down.
-        time.sleep(10)
-        self._devicemanager._checkCmd(['shell', 'start', 'b2g'])
-        if self._is_emulator:
-            self.marionette.emulator.wait_for_port(self.marionette.port)
-
-    def rebootDevice(self):
-        # find device's current status and serial number
-        serial, status = self.getDeviceStatus()
-
-        # reboot!
-        self._devicemanager._runCmd(['shell', '/system/bin/reboot'])
-
-        # The above command can return while adb still thinks the device is
-        # connected, so wait a little bit for it to disconnect from adb.
-        time.sleep(10)
-
-        # wait for device to come back to previous status
-        print 'waiting for device to come back online after reboot'
-        start = time.time()
-        rserial, rstatus = self.getDeviceStatus(serial)
-        while rstatus != 'device':
-            if time.time() - start > 120:
-                # device hasn't come back online in 2 minutes, something's wrong
-                raise Exception("Device %s (status: %s) not back online after reboot" % (serial, rstatus))
-            time.sleep(5)
-            rserial, rstatus = self.getDeviceStatus(serial)
-        print 'device:', serial, 'status:', rstatus
-
-    def Process(self, cmd, stdout=None, stderr=None, env=None, cwd=None):
-        # On a desktop or fennec run, the Process method invokes a gecko
-        # process in which to the tests.  For B2G, we simply
-        # reboot the device (which was configured with a test profile
-        # already), wait for B2G to start up, and then navigate to the
-        # test url using Marionette.  There doesn't seem to be any way
-        # to pass env variables into the B2G process, but this doesn't
-        # seem to matter.
-
-        # reboot device so it starts up with the mochitest profile
-        # XXX:  We could potentially use 'stop b2g' + 'start b2g' to achieve
-        # a similar effect; will see which is more stable while attempting
-        # to bring up the continuous integration.
-        if not self._is_emulator:
-            self.rebootDevice()
-            time.sleep(5)
-            #wait for wlan to come up
-            if not self.waitForNet():
-                raise Exception("network did not come up, please configure the network" +
-                                " prior to running before running the automation framework")
-
-        # stop b2g
-        self._devicemanager._runCmd(['shell', 'stop', 'b2g'])
-        time.sleep(5)
-
-        # For some reason user.js in the profile doesn't get picked up.
-        # Manually copy it over to prefs.js. See bug 1009730 for more details.
-        self._devicemanager.moveTree(posixpath.join(self._remoteProfile, 'user.js'),
-                                     posixpath.join(self._remoteProfile, 'prefs.js'))
-
-        # relaunch b2g inside b2g instance
-        instance = self.B2GInstance(self._devicemanager, env=env)
-
-        time.sleep(5)
-
-        # Set up port forwarding again for Marionette, since any that
-        # existed previously got wiped out by the reboot.
-        if not self._is_emulator:
-            self._devicemanager._checkCmd(['forward',
-                                           'tcp:%s' % self.marionette.port,
-                                           'tcp:%s' % self.marionette.port])
-
-        if self._is_emulator:
-            self.marionette.emulator.wait_for_port(self.marionette.port)
-        else:
-            time.sleep(5)
-
-        # start a marionette session
-        session = self.marionette.start_session()
-        if 'b2g' not in session:
-            raise Exception("bad session value %s returned by start_session" % session)
-
-        with self.marionette.using_context(self.marionette.CONTEXT_CHROME):
-            self.marionette.execute_script("""
-                let SECURITY_PREF = "security.turn_off_all_security_so_that_viruses_can_take_over_this_computer";
-                Components.utils.import("resource://gre/modules/Services.jsm");
-                Services.prefs.setBoolPref(SECURITY_PREF, true);
-
-                if (!testUtils.hasOwnProperty("specialPowersObserver")) {
-                  let loader = Components.classes["@mozilla.org/moz/jssubscript-loader;1"]
-                    .getService(Components.interfaces.mozIJSSubScriptLoader);
-                  loader.loadSubScript("chrome://specialpowers/content/SpecialPowersObserver.jsm",
-                    testUtils);
-                  testUtils.specialPowersObserver = new testUtils.SpecialPowersObserver();
-                  testUtils.specialPowersObserver.init();
-                }
-                """)
-
-            # run the script that starts the tests
-            if self.test_script:
-                if os.path.isfile(self.test_script):
-                    script = open(self.test_script, 'r')
-                    self.marionette.execute_script(script.read(), script_args=self.test_script_args)
-                    script.close()
-                elif isinstance(self.test_script, basestring):
-                    self.marionette.execute_script(self.test_script, script_args=self.test_script_args)
-            else:
-                # assumes the tests are started on startup automatically
-                pass
-
-        return instance
-
-    # be careful here as this inner class doesn't have access to outer class members
-    class B2GInstance(object):
-        """Represents a B2G instance running on a device, and exposes
-           some process-like methods/properties that are expected by the
-           automation.
-        """
-
-        def __init__(self, dm, env=None):
-            self.dm = dm
-            self.env = env or {}
-            self.stdout_proc = None
-            self.queue = Queue.Queue()
-
-            # Launch b2g in a separate thread, and dump all output lines
-            # into a queue.  The lines in this queue are
-            # retrieved and returned by accessing the stdout property of
-            # this class.
-            cmd = [self.dm._adbPath]
-            if self.dm._deviceSerial:
-                cmd.extend(['-s', self.dm._deviceSerial])
-            cmd.append('shell')
-            for k, v in self.env.iteritems():
-                cmd.append("%s=%s" % (k, v))
-            cmd.append('/system/bin/b2g.sh')
-            proc = threading.Thread(target=self._save_stdout_proc, args=(cmd, self.queue))
-            proc.daemon = True
-            proc.start()
-
-        def _save_stdout_proc(self, cmd, queue):
-            self.stdout_proc = StdOutProc(cmd, queue)
-            self.stdout_proc.run()
-            if hasattr(self.stdout_proc, 'processOutput'):
-                self.stdout_proc.processOutput()
-            self.stdout_proc.wait()
-            self.stdout_proc = None
-
-        @property
-        def pid(self):
-            # a dummy value to make the automation happy
-            return 0
-
-        def getStdoutLines(self, timeout):
-            # Return any lines in the queue used by the
-            # b2g process handler.
-            lines = []
-            # get all of the lines that are currently available
-            while True:
-                try:
-                    lines.append(self.queue.get_nowait())
-                except Queue.Empty:
-                    break
-
-            # wait 'timeout' for any additional lines
-            if not lines:
-                try:
-                    lines.append(self.queue.get(True, timeout))
-                except Queue.Empty:
-                    pass
-            return lines
-
-        def wait(self, timeout=None):
-            # this should never happen
-            raise Exception("'wait' called on B2GInstance")
-
-        def kill(self):
-            # this should never happen
-            raise Exception("'kill' called on B2GInstance")
-
@@ -1,401 +0,0 @@
-# This Source Code Form is subject to the terms of the Mozilla Public
-# License, v. 2.0. If a copy of the MPL was not distributed with this
-# file, You can obtain one at http://mozilla.org/MPL/2.0/.
-
-import datetime
-import glob
-import time
-import re
-import os
-import posixpath
-import tempfile
-import shutil
-import subprocess
-import sys
-
-from automation import Automation
-from mozdevice import DMError, DeviceManager
-from mozlog import get_default_logger
-import mozcrash
-
-# signatures for logcat messages that we don't care about much
-fennecLogcatFilters = [ "The character encoding of the HTML document was not declared",
-                        "Use of Mutation Events is deprecated. Use MutationObserver instead.",
-                        "Unexpected value from nativeGetEnabledTags: 0" ]
-
-class RemoteAutomation(Automation):
-    _devicemanager = None
-
-    # Part of a hack for Robocop: "am COMMAND" is handled specially if COMMAND
-    # is in this set. See usages below.
-    _specialAmCommands = ('instrument', 'start')
-
-    def __init__(self, deviceManager, appName = '', remoteLog = None,
-                 processArgs=None):
-        self._devicemanager = deviceManager
-        self._appName = appName
-        self._remoteProfile = None
-        self._remoteLog = remoteLog
-        self._processArgs = processArgs or {};
-
-        # Default our product to fennec
-        self._product = "fennec"
-        self.lastTestSeen = "remoteautomation.py"
-        Automation.__init__(self)
-
-    def setDeviceManager(self, deviceManager):
-        self._devicemanager = deviceManager
-
-    def setAppName(self, appName):
-        self._appName = appName
-
-    def setRemoteProfile(self, remoteProfile):
-        self._remoteProfile = remoteProfile
-
-    def setProduct(self, product):
-        self._product = product
-
-    def setRemoteLog(self, logfile):
-        self._remoteLog = logfile
-
-    # Set up what we need for the remote environment
-    def environment(self, env=None, xrePath=None, crashreporter=True, debugger=False, dmdPath=None, lsanPath=None):
-        # Because we are running remote, we don't want to mimic the local env
-        # so no copying of os.environ
-        if env is None:
-            env = {}
-
-        if dmdPath:
-            env['MOZ_REPLACE_MALLOC_LIB'] = os.path.join(dmdPath, 'libdmd.so')
-
-        # Except for the mochitest results table hiding option, which isn't
-        # passed to runtestsremote.py as an actual option, but through the
-        # MOZ_HIDE_RESULTS_TABLE environment variable.
-        if 'MOZ_HIDE_RESULTS_TABLE' in os.environ:
-            env['MOZ_HIDE_RESULTS_TABLE'] = os.environ['MOZ_HIDE_RESULTS_TABLE']
-
-        env['MOZ_CRASHREPORTER_DISABLE'] = '1'
-
-        # Crash on non-local network connections by default.
-        # MOZ_DISABLE_NONLOCAL_CONNECTIONS can be set to "0" to temporarily
-        # enable non-local connections for the purposes of local testing.
-        # Don't override the user's choice here.  See bug 1049688.
-        env.setdefault('MOZ_DISABLE_NONLOCAL_CONNECTIONS', '1')
-
-        # Send an env var noting that we are in automation. Passing any
-        # value except the empty string will declare the value to exist.
-        #
-        # This may be used to disabled network connections during testing, e.g.
-        # Switchboard & telemetry uploads.
-        env.setdefault('MOZ_IN_AUTOMATION', '1')
-
-        # Set WebRTC logging in case it is not set yet.
-        # On Android, environment variables cannot contain ',' so the
-        # standard WebRTC setting for NSPR_LOG_MODULES is not available.
-        # env.setdefault('NSPR_LOG_MODULES', 'signaling:5,mtransport:5,datachannel:5,jsep:5,MediaPipelineFactory:5')
-        env.setdefault('R_LOG_LEVEL', '6')
-        env.setdefault('R_LOG_DESTINATION', 'stderr')
-        env.setdefault('R_LOG_VERBOSE', '1')
-
-        return env
-
-    def waitForFinish(self, proc, utilityPath, timeout, maxTime, startTime, debuggerInfo, symbolsPath, outputHandler=None):
-        """ Wait for tests to finish.
-            If maxTime seconds elapse or no output is detected for timeout
-            seconds, kill the process and fail the test.
-        """
-        # maxTime is used to override the default timeout, we should honor that
-        status = proc.wait(timeout = maxTime, noOutputTimeout = timeout)
-        self.lastTestSeen = proc.getLastTestSeen
-
-        topActivity = self._devicemanager.getTopActivity()
-        if topActivity == proc.procName:
-            proc.kill(True)
-        if status == 1:
-            if maxTime:
-                print "TEST-UNEXPECTED-FAIL | %s | application ran for longer than " \
-                      "allowed maximum time of %s seconds" % (self.lastTestSeen, maxTime)
-            else:
-                print "TEST-UNEXPECTED-FAIL | %s | application ran for longer than " \
-                      "allowed maximum time" % (self.lastTestSeen)
-        if status == 2:
-            print "TEST-UNEXPECTED-FAIL | %s | application timed out after %d seconds with no output" \
-                % (self.lastTestSeen, int(timeout))
-
-        return status
-
-    def deleteANRs(self):
-        # empty ANR traces.txt file; usually need root permissions
-        # we make it empty and writable so we can test the ANR reporter later
-        traces = "/data/anr/traces.txt"
-        try:
-            self._devicemanager.shellCheckOutput(['echo', '', '>', traces], root=True,
-                                                 timeout=DeviceManager.short_timeout)
-            self._devicemanager.shellCheckOutput(['chmod', '666', traces], root=True,
-                                                 timeout=DeviceManager.short_timeout)
-        except DMError:
-            print "Error deleting %s" % traces
-            pass
-
-    def checkForANRs(self):
-        traces = "/data/anr/traces.txt"
-        if self._devicemanager.fileExists(traces):
-            try:
-                t = self._devicemanager.pullFile(traces)
-                if t:
-                    stripped = t.strip()
-                    if len(stripped) > 0:
-                        print "Contents of %s:" % traces
-                        print t
-                # Once reported, delete traces
-                self.deleteANRs()
-            except DMError:
-                print "Error pulling %s" % traces
-            except IOError:
-                print "Error pulling %s" % traces
-        else:
-            print "%s not found" % traces
-
-    def deleteTombstones(self):
-        # delete any existing tombstone files from device
-        remoteDir = "/data/tombstones"
-        try:
-            self._devicemanager.shellCheckOutput(['rm', '-r', remoteDir], root=True,
-                                                 timeout=DeviceManager.short_timeout)
-        except DMError:
-            # This may just indicate that the tombstone directory is missing
-            pass
-
-    def checkForTombstones(self):
-        # pull any tombstones from device and move to MOZ_UPLOAD_DIR
-        remoteDir = "/data/tombstones"
-        blobberUploadDir = os.environ.get('MOZ_UPLOAD_DIR', None)
-        if blobberUploadDir:
-            if not os.path.exists(blobberUploadDir):
-                os.mkdir(blobberUploadDir)
-            if self._devicemanager.dirExists(remoteDir):
-                # copy tombstone files from device to local blobber upload directory
-                try:
-                    self._devicemanager.shellCheckOutput(['chmod', '777', remoteDir], root=True,
-                                                 timeout=DeviceManager.short_timeout)
-                    self._devicemanager.shellCheckOutput(['chmod', '666', os.path.join(remoteDir, '*')], root=True,
-                                                 timeout=DeviceManager.short_timeout)
-                    self._devicemanager.getDirectory(remoteDir, blobberUploadDir, False)
-                except DMError:
-                    # This may just indicate that no tombstone files are present
-                    pass
-                self.deleteTombstones()
-                # add a .txt file extension to each tombstone file name, so
-                # that blobber will upload it
-                for f in glob.glob(os.path.join(blobberUploadDir, "tombstone_??")):
-                    # add a unique integer to the file name, in case there are
-                    # multiple tombstones generated with the same name, for
-                    # instance, after multiple robocop tests
-                    for i in xrange(1, sys.maxint):
-                        newname = "%s.%d.txt" % (f, i)
-                        if not os.path.exists(newname):
-                            os.rename(f, newname)
-                            break
-            else:
-                print "%s does not exist; tombstone check skipped" % remoteDir
-        else:
-            print "MOZ_UPLOAD_DIR not defined; tombstone check skipped"
-
-    def checkForCrashes(self, directory, symbolsPath):
-        self.checkForANRs()
-        self.checkForTombstones()
-
-        logcat = self._devicemanager.getLogcat(filterOutRegexps=fennecLogcatFilters)
-
-        javaException = mozcrash.check_for_java_exception(logcat, test_name=self.lastTestSeen)
-        if javaException:
-            return True
-
-        # No crash reporting means we can't say anything.
-        return False
-
-
-    def buildCommandLine(self, app, debuggerInfo, profileDir, testURL, extraArgs):
-        # If remote profile is specified, use that instead
-        if (self._remoteProfile):
-            profileDir = self._remoteProfile
-
-        # Hack for robocop, if app & testURL == None and extraArgs contains the rest of the stuff, lets
-        # assume extraArgs is all we need
-        if app == "am" and extraArgs[0] in RemoteAutomation._specialAmCommands:
-            return app, extraArgs
-
-        cmd, args = Automation.buildCommandLine(self, app, debuggerInfo, profileDir, testURL, extraArgs)
-        # Remove -foreground if it exists, if it doesn't this just returns
-        try:
-            args.remove('-foreground')
-        except:
-            pass
-#TODO: figure out which platform require NO_EM_RESTART
-#        return app, ['--environ:NO_EM_RESTART=1'] + args
-        return app, args
-
-    def Process(self, cmd, stdout = None, stderr = None, env = None, cwd = None):
-        if stdout == None or stdout == -1 or stdout == subprocess.PIPE:
-            stdout = self._remoteLog
-
-        return self.RProcess(self._devicemanager, cmd, stdout, stderr, env, cwd, self._appName,
-                             **self._processArgs)
-
-    # be careful here as this inner class doesn't have access to outer class members
-    class RProcess(object):
-        # device manager process
-        dm = None
-        def __init__(self, dm, cmd, stdout=None, stderr=None, env=None, cwd=None, app=None,
-                     messageLogger=None):
-            self.dm = dm
-            self.stdoutlen = 0
-            self.lastTestSeen = "remoteautomation.py"
-            self.proc = dm.launchProcess(cmd, stdout, cwd, env, True)
-            self.messageLogger = messageLogger
-
-            if (self.proc is None):
-                if cmd[0] == 'am':
-                    self.proc = stdout
-                else:
-                    raise Exception("unable to launch process")
-            self.procName = cmd[0].split('/')[-1]
-            if cmd[0] == 'am' and cmd[1] in RemoteAutomation._specialAmCommands:
-                self.procName = app
-
-            # Setting timeout at 1 hour since on a remote device this takes much longer.
-            # Temporarily increased to 90 minutes because no more chunks can be created.
-            self.timeout = 5400
-            # The benefit of the following sleep is unclear; it was formerly 15 seconds
-            time.sleep(1)
-
-            # Used to buffer log messages until we meet a line break
-            self.logBuffer = ""
-
-        @property
-        def pid(self):
-            pid = self.dm.processExist(self.procName)
-            # HACK: we should probably be more sophisticated about monitoring
-            # running processes for the remote case, but for now we'll assume
-            # that this method can be called when nothing exists and it is not
-            # an error
-            if pid is None:
-                return 0
-            return pid
-
-        def read_stdout(self):
-            """
-            Fetch the full remote log file using devicemanager, process them and
-            return whether there were any new log entries since the last call.
-            """
-            if not self.dm.fileExists(self.proc):
-                return False
-            try:
-                newLogContent = self.dm.pullFile(self.proc, self.stdoutlen)
-            except DMError:
-                # we currently don't retry properly in the pullFile
-                # function in dmSUT, so an error here is not necessarily
-                # the end of the world
-                return False
-            if not newLogContent:
-                return False
-
-            self.stdoutlen += len(newLogContent)
-
-            if self.messageLogger is None:
-                testStartFilenames = re.findall(r"TEST-START \| ([^\s]*)", newLogContent)
-                if testStartFilenames:
-                    self.lastTestSeen = testStartFilenames[-1]
-                print newLogContent
-                return True
-
-            self.logBuffer += newLogContent
-            lines = self.logBuffer.split('\n')
-            lines = [l for l in lines if l]
-
-            if lines:
-                if self.logBuffer.endswith('\n'):
-                    # all lines are complete; no need to buffer
-                    self.logBuffer = ""
-                else:
-                    # keep the last (unfinished) line in the buffer
-                    self.logBuffer = lines[-1]
-                    del lines[-1]
-
-            if not lines:
-                return False
-
-            for line in lines:
-                # This passes the line to the logger (to be logged or buffered)
-                parsed_messages = self.messageLogger.write(line)
-                for message in parsed_messages:
-                    if isinstance(message, dict) and message.get('action') == 'test_start':
-                        self.lastTestSeen = message['test']
-            return True
-
-        @property
-        def getLastTestSeen(self):
-            return self.lastTestSeen
-
-        # Wait for the remote process to end (or for its activity to go to background).
-        # While waiting, periodically retrieve the process output and print it.
-        # If the process is still running after *timeout* seconds, return 1;
-        # If the process is still running but no output is received in *noOutputTimeout*
-        # seconds, return 2;
-        # Else, once the process exits/goes to background, return 0.
-        def wait(self, timeout = None, noOutputTimeout = None):
-            timer = 0
-            noOutputTimer = 0
-            interval = 10
-            if timeout == None:
-                timeout = self.timeout
-            status = 0
-            top = self.procName
-            slowLog = False
-            while (top == self.procName):
-                # Get log updates on each interval, but if it is taking
-                # too long, only do it every 60 seconds
-                if (not slowLog) or (timer % 60 == 0):
-                    startRead = datetime.datetime.utcnow()
-                    hasOutput = self.read_stdout()
-                    if (datetime.datetime.utcnow() - startRead) > datetime.timedelta(seconds=5):
-                        slowLog = True
-                    if hasOutput:
-                        noOutputTimer = 0
-                time.sleep(interval)
-                timer += interval
-                noOutputTimer += interval
-                if (timer > timeout):
-                    status = 1
-                    break
-                if (noOutputTimeout and noOutputTimer > noOutputTimeout):
-                    status = 2
-                    break
-                top = self.dm.getTopActivity()
-            # Flush anything added to stdout during the sleep
-            self.read_stdout()
-            return status
-
-        def kill(self, stagedShutdown = False):
-            if stagedShutdown:
-                # Trigger an ANR report with "kill -3" (SIGQUIT)
-                self.dm.killProcess(self.procName, 3)
-                time.sleep(3)
-                # Trigger a breakpad dump with "kill -6" (SIGABRT)
-                self.dm.killProcess(self.procName, 6)
-                # Wait for process to end
-                retries = 0
-                while retries < 3:
-                    pid = self.dm.processExist(self.procName)
-                    if pid and pid > 0:
-                        print "%s still alive after SIGABRT: waiting..." % self.procName
-                        time.sleep(5)
-                    else:
-                        return
-                    retries += 1
-                self.dm.killProcess(self.procName, 9)
-                pid = self.dm.processExist(self.procName)
-                if pid and pid > 0:
-                    self.dm.killProcess(self.procName)
-            else:
-                self.dm.killProcess(self.procName)
@@ -785,13 +785,3 @@ def js_option(*args, **kwargs):
            return value.format(opt.option)

    add_old_configure_arg(js_option)
-
-
-# Bug 1278542: This function is a workaround to resolve
-# |android_ndk_include|'s dependency on 'gonkdir.' The
-# actual implementation is located in b2g/moz.configure.
-# Remove this function as soon as 'android_ndk_include'
-# depends on 'target.'
-@depends('--help')
-def gonkdir(_):
-    return None
@@ -254,11 +254,6 @@ def old_configure_options(*options):
    '--libdir',
    '--no-create',
    '--prefix',
-    '--with-android-cxx-stl',
-    '--with-android-distribution-directory',
-    '--with-android-max-sdk',
-    '--with-android-min-sdk',
-    '--with-android-sdk',
    '--with-app-basename',
    '--with-app-name',
    '--with-arch',
@@ -550,14 +550,6 @@ ifeq (,$(filter $(OS_TARGET),WINNT Darwin))
 CHECK_TEXTREL = @$(TOOLCHAIN_PREFIX)readelf -d $(1) | grep TEXTREL > /dev/null && echo 'TEST-UNEXPECTED-FAIL | check_textrel | We do not want text relocations in libraries and programs' || true
 endif

-ifeq ($(MOZ_WIDGET_TOOLKIT),android)
-# While this is very unlikely (libc being added by the compiler at the end
-# of the linker command line), if libmozglue.so ends up after libc.so, all
-# hell breaks loose, so better safe than sorry, and check it's actually the
-# case.
-CHECK_MOZGLUE_ORDER = @$(TOOLCHAIN_PREFIX)readelf -d $(1) | grep NEEDED | awk '{ libs[$$NF] = ++n } END { if (libs["[libmozglue.so]"] && libs["[libc.so]"] < libs["[libmozglue.so]"]) { print "libmozglue.so must be linked before libc.so"; exit 1 } }'
-endif
-
 define CHECK_BINARY
 $(call CHECK_GLIBC,$(1))
 $(call CHECK_STDCXX,$(1))
@@ -514,13 +514,9 @@ nsPicoService::Init()
    return;
  }

-  // Use environment variable, or default android/b2g path
+  // Use environment variable
  nsAutoCString langPath(PR_GetEnv("PICO_LANG_PATH"));

-  if (langPath.IsEmpty()) {
-    langPath.AssignLiteral(GONK_PICO_LANG_PATH);
-  }
-
  nsCOMPtr<nsIFile> voicesDir;
  NS_NewNativeLocalFile(langPath, true, getter_AddRefs(voicesDir));

@@ -2,18 +2,15 @@
 # to the specific list of apps that use it so it doesn't get loaded in xpcshell.
 # Thus we restrict it to these apps:
 #
-#   b2g:            {3c2e2abc-06d4-11e1-ac3b-374f68613e61}
 #   basilisk:       {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
 #   pale moon:      {8de7fcbb-c55c-4fbe-bfc5-fc555c87dbc4}
-#   mobile/android: {aa3c5121-dab2-40e2-81ca-7ea25febc110}
-#   mobile/xul:     {a23983c0-fd0e-11dc-95ff-0800200c9a66}
 #   suite (comm):   {92650c4d-4b8e-4d2a-b7eb-24ecf4f6b63a}
 #   graphene:       {d1bfe7d9-c01e-4237-998b-7b5f960a4314}

 # Weave.js
 component {74b89fb0-f200-4ae8-a3ec-dd164117f6de} Weave.js
 contract @mozilla.org/weave/service;1 {74b89fb0-f200-4ae8-a3ec-dd164117f6de}
-category app-startup WeaveService service,@mozilla.org/weave/service;1 application={3c2e2abc-06d4-11e1-ac3b-374f68613e61} application={ec8030f7-c20a-464f-9b0e-13a3a9e97384} application={8de7fcbb-c55c-4fbe-bfc5-fc555c87dbc4} application={aa3c5121-dab2-40e2-81ca-7ea25febc110} application={a23983c0-fd0e-11dc-95ff-0800200c9a66} application={92650c4d-4b8e-4d2a-b7eb-24ecf4f6b63a} application={99bceaaa-e3c6-48c1-b981-ef9b46b67d60} application={d1bfe7d9-c01e-4237-998b-7b5f960a4314}
+category app-startup WeaveService service,@mozilla.org/weave/service;1 application={ec8030f7-c20a-464f-9b0e-13a3a9e97384} application={8de7fcbb-c55c-4fbe-bfc5-fc555c87dbc4} application={92650c4d-4b8e-4d2a-b7eb-24ecf4f6b63a} application={d1bfe7d9-c01e-4237-998b-7b5f960a4314}
 component {d28f8a0b-95da-48f4-b712-caf37097be41} Weave.js
 contract @mozilla.org/network/protocol/about;1?what=sync-log {d28f8a0b-95da-48f4-b712-caf37097be41}

@@ -2008,18 +2008,6 @@ function saveReportsToFile()
    }
  };

-  try {
-    fp.init(window, "Save Memory Reports", Ci.nsIFilePicker.modeSave);
-  } catch (ex) {
-    // This will fail on Android, since there is no Save as file picker there.
-    // Just save to the default downloads dir if it does.
-    Downloads.getSystemDownloadsDirectory().then(function(dirPath) {
-      let file = FileUtils.File(dirPath);
-      file.append(fp.defaultString);
-      fpFinish(file);
-    });
-
-    return;
-  }
+  fp.init(window, "Save Memory Reports", Ci.nsIFilePicker.modeSave);
  fp.open(fpCallback);
 }
@@ -53,9 +53,8 @@ interface nsIAlertNotification : nsISupports
            [optional] in boolean aRequireInteraction);

  /**
-   * The name of the notification. On Android, the name is hashed and used as
-   * a notification ID. Notifications will replace previous notifications with
-   * the same name.
+   * The name of the notification. Notifications will replace previous
+   * notifications with the same name.
   */
  readonly attribute AString name;

@@ -1039,7 +1039,7 @@ Blocklist.prototype = {

  // <gfxBlacklistEntry blockID="g60">
  //   <os>WINNT 6.0</os>
-  //   <osversion>14</osversion> currently only used for Android
+  //   <osversion>14</osversion>
  //   <versionRange minVersion="42.0" maxVersion="13.0b2"/>
  //   <vendor>0x8086</vendor>
  //   <devices>
@@ -16,13 +16,9 @@ interface mozIDownloadPlatform : nsISupports
   *   Windows:
   *     Add the download to the recent documents list
   *     Set the file to be indexed for searching
-   *   Mac:
-   *     Bounce the downloads dock icon
   *   GTK:
   *     Add the download to the recent documents list
   *     Save the source uri in the downloaded file's metadata
-   *   Android:
-   *     Scan media
   *
   * @param aSource
   *        Source URI of the download
@@ -1626,8 +1626,7 @@ this.DownloadError.prototype = {
   * Indicates the download was blocked because a runtime permission required to
   * download files was not granted.
   *
-   * This does not apply to all systems. On Android this flag is set to true if
-   * a needed runtime permission (storage) has not been granted by the user.
+   * This does not apply to all systems.
   */
  becauseBlockedByRuntimePermissions: false,

@@ -783,7 +783,7 @@ this.DownloadIntegration = {

  /**
   * Force a save on _store if it exists. Used to ensure downloads do not
-   * persist after being sanitized on Android.
+   * persist after being sanitized.
   *
   * @return {Promise}
   * @resolves When _store.save() completes.
@@ -253,16 +253,10 @@ this.Downloads = {

  /**
   * Returns the system downloads directory asynchronously.
-   *   Mac OSX:
-   *     User downloads directory
-   *   XP/2K:
-   *     My Documents/Downloads
-   *   Vista and others:
+   *   Windows:
   *     User downloads directory
   *   Linux:
   *     XDG user dir spec, with a fallback to Home/Downloads
-   *   Android:
-   *     standard downloads directory i.e. /sdcard
   *
   * @return {Promise}
   * @resolves The downloads directory string path.
@@ -237,7 +237,7 @@ AboutReader.prototype = {
        break;

      case "pagehide":
-        // Close the Banners Font-dropdown, cleanup Android BackPressListener.
+        // Close the Banners Font-dropdown, cleanup BackPressListener.
        this._closeDropdowns();
        this._windowUnloaded = true;
        break;
@@ -793,7 +793,7 @@ AboutReader.prototype = {

      let item = doc.createElement("button");

-      // Put the name in a div so that Android can hide it.
+      // Put the name in a div so that it can be hidden if desired.
      let div = doc.createElement("div");
      div.textContent = option.name;
      div.classList.add("name");
@@ -5,11 +5,6 @@
        "WINNT_x86-msvc-x64": {
          "alias": "WINNT_x86-msvc"
        },
-        "Android_x86-gcc3": {
-          "fileUrl": "http://ciscobinary.openh264.org/openh264-android-x86-0410d336bb748149a4f560eb6108090f078254b1.zip",
-          "hashValue": "8ce4d4318aa6ae9ac1376500d5fceecb3df38727aa920efd9f7829c139face4a069cab683d3902e7cdb89daad2a7e928ffba120812ae343f052a833812dad387",
-          "filesize": 1640053
-        },
        "WINNT_x86-msvc": {
          "fileUrl": "http://ciscobinary.openh264.org/openh264-win32-0410d336bb748149a4f560eb6108090f078254b1.zip",
          "hashValue": "991e01c3b95fa13fac52e0512e1936f1edae42ecbbbcc55447a36915eb3ca8f836546cc780343751691e0188872e5bc56fe3ad5f23f3243e90b96a637561b89e",
@@ -41,11 +36,6 @@
          "hashValue": "3b52343070a2f75e91b7b0d3bb33935352237c7e1d2fdc6a467d039ffbbda6a72087f9e0a369fe95e6c4c789ff3052f0c134af721d7273db9ba66d077d85b327",
          "filesize": 390308
        },
-        "Android_arm-eabi-gcc3": {
-          "fileUrl": "http://ciscobinary.openh264.org/openh264-android-arm-0410d336bb748149a4f560eb6108090f078254b1.zip",
-          "hashValue": "7a15245c781f32df310ebb88cb8a783512eab934b38ffd889d6420473d40eddbe8a89c17cc60d4e7647c156b04d20030e1ae0081e3f90a0d8f94626ec5f4d817",
-          "filesize": 1515895
-        },
        "Darwin_x86-gcc3": {
          "alias": "Darwin_x86-gcc3-u-i386-x86_64"
        },
@@ -674,7 +674,7 @@

      <field name="blockedPopups">null</field>

-      <!-- Obsolete name for blockedPopups. Used by android. -->
+      <!-- Obsolete name for blockedPopups. Maybe unused. -->
      <property name="pageReport"
         onget="return this.blockedPopups;"
         readonly="true"/>
@@ -4,20 +4,6 @@
 # file, You can obtain one at http://mozilla.org/MPL/2.0/.


-# Profiling
-# ==============================================================
-# Some of the options here imply an option from js/moz.configure,
-# so, need to be declared before the include.
-option('--enable-systrace', env='MOZ_USE_SYSTRACE',
-       help='Turn on systrace for the Gecko profiler on android/b2g')
-
-@depends('--enable-systrace', target)
-def systrace(value, target):
-    if value:
-        return True
-
-set_define('MOZ_USE_SYSTRACE', systrace)
-
 # JACK cubeb backend
 # ==============================================================
 option('--enable-jack', env='MOZ_JACK',
@@ -804,7 +804,7 @@ this.XPIDatabase = {

    if (!addonsList.exists())
      // XXX Irving believes this is broken in the case where there is no
-      // extensions.ini but there are bootstrap extensions (e.g. Android)
+      // extensions.ini but there are bootstrap extensions
      return null;

    try {
@@ -15,11 +15,7 @@ else
   ifeq (,$(filter-out gtk2 gtk3 qt, $(MOZ_WIDGET_TOOLKIT)))
      MOZ_PKG_FORMAT  = BZ2
   else
-      ifeq (android,$(MOZ_WIDGET_TOOLKIT))
-          MOZ_PKG_FORMAT = APK
-      else
-          MOZ_PKG_FORMAT = TGZ
-      endif
+      MOZ_PKG_FORMAT = TGZ
   endif
 endif
 endif
@@ -381,14 +377,8 @@ ifndef MOZ_PACKAGER_FORMAT
  MOZ_PACKAGER_FORMAT = $(error MOZ_PACKAGER_FORMAT is not set)
 endif

-ifneq (android,$(MOZ_WIDGET_TOOLKIT))
-  OPTIMIZEJARS = 1
-  ifneq (gonk,$(MOZ_WIDGET_TOOLKIT))
-    ifdef NIGHTLY_BUILD
-      JAR_COMPRESSION ?= none
-    endif
-  endif
-endif
+# We optimize jars on all supported OS-es
+OPTIMIZEJARS = 1

 # A js binary is needed to perform verification of JavaScript minification.
 # We can only use the built binary when not cross-compiling. Environments
@@ -95,12 +95,6 @@ GetBasename(const nsCString& aPath, nsACString& aOut)
    out.Assign(Substring(aPath, idx + 1));
  }

-  // On Android, some entries in /dev/ashmem end with "(deleted)" (e.g.
-  // "/dev/ashmem/libxul.so(deleted)").  We don't care about this modifier, so
-  // cut it off when getting the entry's basename.
-  if (EndsWithLiteral(out, "(deleted)")) {
-    out.Assign(Substring(out, 0, out.RFind("(deleted)")));
-  }
  out.StripChars(" ");

  aOut.Assign(out);