wekan/docs/Features/Admin-Panel/Problems/RAM-usage.md

RAM-usage monitor and Admin Panel → Problems → Memory Usage

Status: Implemented (2026-10-17) · Owner: xet7 · Files: server/lib/ramMonitor.js, server/lib/ramLog.js (through the shared server/lib/resourceLog.js), models/lib/ramHighTracker.js, the ram stream in models/eventLog.js, Admin Panel → Problems → Memory Usage (/admin/problems/ram). Tests: tests/ramHighTracker.test.cjs, tests/resourceMonitorsWiring.test.cjs.

Sibling of the CPU-usage monitor. WeKan and FerretDB on the same machine can use enough RAM (and push the machine into swap) to starve or crash other software — and swapping makes everything slow. This subsystem watches system-wide memory + swap usage and records only the start and end of each sustained high-usage period to an Admin Panel → Problems → RAM usage report, so operators can see when memory pressure began, how bad it got, and when it cleared — without a flood of rows.

1. Requirements

1. While WeKan (and FerretDB alongside it) run, watch how much RAM and swap are used.
2. Add an Admin Panel → Problems → RAM usage report.
3. Log when high usage starts and when high usage ends — only those two rows per episode, so the report never floods.
4. Each row records how much RAM and swap were used (used / total and percentages), the peak during the episode, its duration, and what WeKan/FerretDB were doing at the time (the same coarse activity label the CPU monitor uses).
5. Best-effort and never throws; a no-op where the numbers are unavailable (e.g. a sandbox with no /proc/meminfo).

2. Design

Mirrors the CPU-usage subsystem so the three Problems monitors (CPU, RAM, Disk) share one shape, one event-stream mechanism, and one report template.

Measurement — system-wide, includes FerretDB

server/lib/ramMonitor.js samples on an interval (WEKAN_RAM_SAMPLE_INTERVAL_MS, default 5s):

• RAM: on Linux, MemTotal and MemAvailable from /proc/meminfo; used RAM% = (total − available) / total × 100. MemAvailable counts the page cache the kernel can drop as available - os.freemem() (MemFree) does not, and would show a healthy server with a full cache as out of memory. Without /proc/meminfo (not Linux, or an old kernel) the monitor uses os.totalmem() and os.freemem(). Measured at the OS level, so it includes WeKan, FerretDB and every other process — the true "is the machine low on memory" signal.
• Swap: on Linux, read SwapTotal and SwapFree from /proc/meminfo; used swap% = (SwapTotal − SwapFree) / SwapTotal × 100. When /proc/meminfo is unreadable or there is no swap, swap is reported as unavailable and only RAM drives the episode. (Node's process.memoryUsage() — WeKan's own RSS — is recorded in the detail for context but is not the trigger; the trigger is system-wide.)

Start/end only — models/lib/ramHighTracker.js

A pure, unit-tested state machine (identical shape to cpuHighTracker.js) turns the sample stream into just two events per episode, with hysteresis to prevent flapping:

• enter the high state after WEKAN_RAM_HIGH_SAMPLES (3) consecutive samples at/above WEKAN_RAM_HIGH_PERCENT (default 90% RAM used) OR at/above WEKAN_SWAP_HIGH_PERCENT (default 25% swap used — any real swapping is already a performance problem);
• leave it after WEKAN_RAM_LOW_SAMPLES (3) consecutive samples with RAM below WEKAN_RAM_LOW_PERCENT (default 80%) and swap below the swap threshold;
• it tracks the peak RAM% and peak swap% seen during the episode for the end row.

Report — Admin Panel → Problems → Memory Usage

Episodes are written to the eventLog collection on the ram stream (a new securityCategories-style stream alongside cpu), and shown by the existing eventStreamReport template (paginated, searchable, read-only). Two rows per episode:

• start (detected): high RAM usage started (>= 90%): RAM 7.4/8.0 GB (92%), swap 0.6/2.0 GB (30%), load …, WeKan: <activity>
• end (remediated): high RAM usage ended after 42s (peak RAM 96%, peak swap 41%, back under 80%): RAM 5.1/8.0 GB (64%), swap 0.1/2.0 GB (5%)

Severity: high when RAM is at ≥ 95% or swap is at/above its threshold when the period starts, else medium. The end row is info, so it does not count as a new problem.

Above the rows, a live line shows the current RAM use (percentage and used / total GB) and swap when the machine has any, refreshed every 5 seconds. The menu entry and the page title use the existing memory-usage translation, so every language already has them.

3. Environment variables

Variable	Default	Meaning
WEKAN_RAM_MONITOR	true	Master on/off.
WEKAN_RAM_SAMPLE_INTERVAL_MS	5000	Sampling interval.
WEKAN_RAM_HIGH_PERCENT	90	Enter high state at/above this RAM used %.
WEKAN_RAM_LOW_PERCENT	80	Leave high state below this RAM used %.
WEKAN_SWAP_HIGH_PERCENT	25	Also enter high state at/above this swap used %.
WEKAN_RAM_HIGH_SAMPLES	3	Consecutive high samples to enter.
WEKAN_RAM_LOW_SAMPLES	3	Consecutive low samples to leave.

4. Notes

• The tracker and the /proc/meminfo parser are pure functions unit-tested without Meteor, exactly like cpuHighTracker.js and its tests, so the enter/leave hysteresis and the meminfo parsing (including missing/zero swap) are covered by positive and negative tests.
• This is intentionally observe-and-report only: unlike CPU, WeKan cannot safely "free" RAM on demand, so there is no governor here — the value is visibility (a self-describing start→end record) so an operator can size the host or cap concurrency. See CPU-usage for the governed sibling and Disk-usage for the disk sibling.