SSBI declarations were in the gpio_keypad files
resulting in needing to add gpio_keypad to use
ssbi for pmic functions.
Change-Id: Ic62a499a3cbd5fab9b8235e469b93103d207b20e
For eye diagram test, USB has to be put in test mode on TEST PACKET
from HSET tool.
CRs-Fixed: 295909
Change-Id: I260753d831065e8b3876d7b95672633e6f881fb2
Due to a hardware design bug, keypad controller in PM8058 could not be
used for key detection. Hence detecting it by configuring PM8058 GPIOs
as normal function and accessing it over SSBI
Change-Id: I92db69fe504598a6d1dfc0736642b1cb7a02be4c
Add code to configure MDP DSI module to support MIPI DSI interface. Add support
to configure Toshiba MIPI panel.
Enable DSI Core clock, DSI BYTE clock, DSI CORE_P clock
Add a new character array representing the QuIC Logo in RGB888 format.
Change-Id: Ic638f5b42998896e8f7750b56457ff091eb91b81
CRs-fixed: 259879
Add code to interface with PMIC SSBI arbiter registers to scan keypad for
msm8660 target. Add two additional functions to read, write and configure
the PMIC gpios used for keypad. Add code to use different read/write functions
for PMIC SSBI2 interface for msm7630 and PMIC arbiter wrapper interface for
msm8660 target.
Change-Id: Idde16232785dfc06728dea29c05b99251e45ba9f
Add code to scan only the common keys present on all the different
varients of msm7630 target. This fixes the issue of device not going
into fastboot when miniSD card is present in a Fluid device.
CRs-fixed: 225917
New memory map for msm7630 with apps bootloader starting at
0x00100000 (1MB) and shared memory at 0x0.
Add new command "loadaddr:" to nandwrite for querying
the load address of images for flashing. This allows the
target to respond with the second/larger memory segment
in order to accommodate larger images.
xndcn
James Sullins
Kinson Chik
Travis Geiselbrecht
Corey Tabaka
Greg Grisco
Subbaraman Narayanamurthy
Channagoud Kadabi
Wentao Xu
Chandan Uddaraju
Shashank Mittal
Chandan Uddaraju
David Ng
Shashank Mittal
Dima Zavin
Brian Swetland